> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



LG L90 - Official firmware



Rep: (2004)
LG L90 - Official firmware
PictureD410, D405
Description | Discussion пїЅ | Accessories пїЅ | Embellishments пїЅ | LG L90 Owners Club пїЅ | Unofficial firmware пїЅ | Official firmware пїЅ

Drivers, utilities, scripts to get Root, replace Boot and Recovery
Instructions

Sequence of actions for flashing custom firmware from under stock

Installing official firmware. Downgrade
An updated way to install KDZ firmware LG Flash Tool. Downgrade.
Firmware via Download Mode
KDZ firmware manual(In pictures) Instructions from another phone, but the course of the firmware is exactly the same.
TOT firmware instructions
Solving common problems
Combined instructions
Getting ROOT rights
Root Removal
Boot-block firmware
Install Third-Party Recovery
Optimization of the smartphone
Unpacking KDZ and TOT firmware
"Scrapping" the smartphone
Firmware and Repair after an unsuccessful upgrade using the LG Mobile Support Tool
Save and restore IMEI
miscellanea
To enter the service menu, dial 277634 # * # or 3845 # * 410 # (for dvuhsimochnika) 3845 # * 405 # (for odnosimochnika)
Firmware
About the choice of firmware
Official firmware
Custom firmware
Version difference
Enhanced - upgraded firmware based on stock;
Balanced - upgraded firmware based on stock firmware with stock core,
All stock applications are present, the interface is changed.
Optimal - upgraded firmware based on stock firmware with custom kernel,
cleared of trash;
OptimalX - upgraded firmware based on stock firmware with a custom kernel,
cleaned of trash and sewn full Xposed (at the moment, the best option for those who need the maximum functionality and the maximum number of pre-installed applications);
LightX_LG - upgraded OptimalX-based firmware that is as clean as possible from rarely used garbage with stock launcher (simply cleared of the rarely used programs OptimalX - for minimalists who like buns of stock launcher);
LightX_v3.5 - upgraded, optimally cleaned from rarely used debris firmware based on OptimalX with third-party launcher (at the moment the most "easy" of all custom firmware based on the drain - for minimalists
Android 5.0
D405
D410
Android 4.4
D410

Fashion
miscellanea
Bootstack
Boot blocks
Kernels
Custom recovery
Useful
Information for those who do not want after the OTA-update problems with the operation of the smartphone
Service Manual for repair and maintenance of LG L90 D410 (English)

miscellanea
Global shutdown of the proximity sensor
Enabling insecure root access by ADB to enable the ability to change files in the sectionsystem
Photos of the disassembled LG D410
Replacing the display on the example of LG D405n
AROMA Filemanager - for changing files from under custom recovery without booting the system
Change the region for the appearance of Russian letters in the ringer smartphone
Download in "Safe Mode"
Instructions for implementing ADB connection on Windows 7+
Increase free memory with Partition Table Tool [Xda] Note on correct operation
Tips for the young brooder
Enable Developer Mode, Features, and "Why Use It"
Governors and I / O shedulers description
What is Entropy?
How to turn off noise reduction on our phone
Instructions for L90
The main and little-known features of the stock firmware LG L90
Lock apps on the screen
Denial of warranty due to unlocking the bootloader is illegal
Increase microphone volume and stereo video recording mode and microphone gain

Interface modifications
Interface modes with 9 unlock effects for v20cd D410 and v20b D405пїЅ1 пїЅ2
Another interface mod and settings for firmware stock v20d (v20c)
Voice Mate - Voice Assistant, G3 / G4 port Android 5.0.2
Activation of the “Vibration Intensity” settings item in the stock of Android 5.0.2 firmware and based on them
Large round caller photo and large square caller photo (v20b (Android 5.0.2) for D410)
Contacts and dialer in black
Dark curtain

It is informative
How to set up system processes in Android: 5 useful modules xposed
How to find a lost Android
How to remove startup programs in Android
How to distribute the Internet from Android to a computer or tablet
How to quickly and conveniently adjust the brightness of the screen Android
How to identify the culprit fast battery discharge in Android
How to clear default program settings on Android?
How to turn off text AutoCorrect on most Android smartphones?
How to install pop-up notifications from Android L to 4.4
How to help Android-phone live until the evening. Several ways to save battery power
What is Root for Android
How to set up Android system notifications using Xtoast
Survey results - help in choosing firmware for newcomers topics
Attached Image


There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).


Post has been editedAlexandВ® - 30.06.19, 09:53
Reason for editing: Global proximity sensor trips



Rep: (3101)
Dear Colleagues!
The next firmware for LG D410 based v20c.

Firmware L90_D410_v20c_Balanced_062015 for L90 D410.


It is installed from any firmware (5.0.2, 4.4.2 and others).
Established by rekaverirespected oleg2903 (Design, from my point of view is more pleasant)
do not forget to thank the distinguished oleg2903 rekaveri for it;

Changes from the drain v20c:
- nothing is deleted;
- rutirovana (integrated Superuser 2.49, if the request update
binaries, you can upgrade, but you can not update all the works of "the box");
- installed BusyBox;
- init.d support;
- Implemented the ability to record to an SD card (editing
platform.xml, analogously to SDFix);
- lower CPU operating frequency is lowered from 787 MHz to 384 MHz, to reduce
power consumption;
- the dialog box about safe volume is disabled when headphones are connected;
- improved network reception;
- reduce delays when responding to incoming calls (where after the answer, the caller can not hear your first word / half word)

- display information about the amount of free RAM in the open curtain and window
"The recently launched applications";
- "Startup" applications, including system ( "Settings", "Startup");
- in "Preferences" (SYSTEM) added item "Performance" for
control the available operating modes of the kernel and the system as a whole (select this
item launches KernelAdiutor);

- widget flashlight resizable widget from 1x1 to 2x2;
- grid desktop (launcher) 4x5;

- single-page menu "Settings";
- full date in the open curtain;
- increased font size of the clock in the open curtain;
- a button to "Off" in the header of the open shutter (full analogue hardware,
short press blanks the screen, long - causes an overload menu) with the possibility of
its hide / show ( "Settings" - "Display" - "buttons in the panel curtain");
- call button overload extended menu in the header open shutters
with the ability to hide / show ( "Settings" - "Display" - "Panel buttons
in the curtain ");
- removed the buttons for selecting SIM-cards in the open curtain;
- the font size of the clock and date has been increased, the ring on the lock screen has been removed;
- display information about the alarm on the lock screen;
- speed display of data exchange in the status bar, when the
data communication - appears switched off - disappears,
with the ability to turn on / off ( "Settings" - "Display" - "Communication");

- Enlarge photo caller calling, call waiting button shifted to the right
(Does not overlap a photo of the caller);
- Name of the caller in 2 lines (if it does not fit in one);
- removed call delay;
- displaying the contact's full name in two lines in the "Contacts" and "Favorites" lists;
- enlarged photo when tap on the contact photo;
- displaying the contact name in two lines with tap on the name of the contact in
Contact and Favorites lists
- enlarged photo with tap on the name of the contact;

- all applications that are in the official firmware - contains nothing
not deleted;
- set terminal emulator (Android Terminal Emulator 1.0.70);
- The following applications are integrated into the firmware:
- GPS Test 1.3.2;
- Link2SD 3.3.1 (events);
- Memory Booster Full 6.0.6 - Optimize RAM and Task Killer;
- QuickPic 4.5.2 (mod) (app called Gallery);
- Root Explorer 3.3.5;
- SD Maid Pro-System Cleaning Tool_3.1.3.3 (mod) - cleaning "tails" after
uninstall applications;
- jetAudio Plus 5.5.0_m - audio player (better and more beautiful than stock);
- ViPER4Android FX 2.3.4.0 (events);
- KernelAdiutor 0.9.7 - management of the CPU operating mode, GPU and system as a whole;
- MenuOff (Menu Off.) 1.5 - nastraivoemoe extended overload menu;

It is preset as a bonus (as a normal application):
- LG G3 theme;
- topic Nexus;

All these programs are present on the forum, if you don’t know how to use it,
or configure one of these programs by searching the forum, and carefully read the description.
If any of these programs are not needed, they can be easily removed using Link2SD 3.3.1, including system ones.

https://yadi.sk/d/wWi3nqGYhbEoL
Installation:
Do not forget to backup.

The installation process is described for CWM rekaveri.

1. Download the firmware and copy it to the root of the SD card.
2. Go to the recovery.
3. We do wipe data / factory reset, wipe cache partition,
we go to the advanced point, do wipe dalvik cache, return to the main recovery page,
go to the mounts and storage item, do format / system, format / cache, format / data and return to the main recovery page.
4. Select the install zip item, then choose zip from / external_sd and select the firmware file.
5. We are waiting for the firmware to be installed.
6. Return to the main recovery page and reboot by selecting the reboot system now option.
(if a suggestion arises: - Yes - Fix root (/ system / xbin / su) select it).

After setting EEPROM advise - clean RAM via Memory Booster,
remove unnecessary applications from "Startup",
once again clean the RAM using the Memory Booster, configure everything you need for yourself,
give the body an hour to "get comfortable" with the new firmware.
Increased productivity compared with no drain, but also the "brakes"
to complain that some users on Android 5.0.2 firmware, I personally did not notice.
Settings KernelAdiutor 0.9.7:
Only those points where changes are made are given.
After setting the values ​​in each items where the values ​​have been changed,
enable at the top of the item - "Apply at boot".

I / O Scheduler

INNER MEMORY

Scheduler - cfq
Read Ahead - 4096 kB

auxiliary memory

Scheduler - cfq
Read Ahead - 4096 kB

Low memory killer

Choose - Easy

Entropy

Read - in 2048 or 4096
Write - in 2048 or 4096

Settings

Hide application messages during
boot time - On

Notifications - Off

After this, it is advisable to reboot the bodies and check the settings.

Lyrical digression:
While work is not very nice with firmware based on Android 5.h.h,
there is normally spent software to work with firmware / File
(All available still raw, there are glitches)
in the same operation takes longer structurally firmware
and content differ from the firmware to the previous versions of Android.
This is not just my opinion.
One of the gurus, though for a different body, some described the
firmware based on Android 5.h.h - "It seems that it wrote 20 drunken Koreans
approached, when, who wanted, and append that someone took it, "in the head.



There are plenty of interesting ideas, but implementation takes time.

Post has been editedUNS4 - 09.08.15, 14:06



Rep: (1)
Attached Image

I did everything according to instructions, and that's what happened.
Restore factory program and still when I press the phone pops up an error.



Rep: (88)
Forum, wanted to revert to the lollipop to kitkat. How can I do this? Phone official. D410.



Rep: (225)
subarist1 @ 01.07.2015, 14:47*
roll with lollipop to kitkat

under spoiler "instructions" - "Setting the official firmware."
Firmware under spoiler "official firmware"

Post has been editedfoxtom - 01.07.15, 15:09



Rep: (3)
Dear gurus tell. On the firmware does not catch 20c gps, or rather not agps loads the data. Tried two bend gps test and gps status. I tried to change gps.conf on a worker who has been in Cyan, does not help. The location settings gps + network. Who is in the 20s?



Rep: (42)
tried to enter the daunload mode, previously installed all the drivers before that, went into the daunload mode, but the computer doesn’t react to it, on the Firmware Update phone itself, a com-port should be written below, but it isn’t there, it’s just that USER B46 is written, and everything. What to do, what to do?

after a while, the installation of the drivers started again, but the installation was interrupted, as the type of bodies was removed
Attached Image


Post has been editedandroid_igor96 - 01.07.15, 18:27



Rep: (109)
The updated driverLGUnitedMobileDriver 3.14.1 from office the site
Attached fileLGUnitedMobileDriver 3.14.1_ML_WHQL.exe(12.23 MB)

I.Disk
add to cap


K
added to the cap


Post has been editedjlpubet - 02.07.15, 09:04
Reason for edit: link to Yandex.Disk



Rep: (168)
* android_igor96
Take away completely and reinstall it. and change the port and cable possible



Rep: (3101)
Dear Colleagues!
The next firmware for LG D410 based v20c.

Firmware L90_D410_v20c_Optimal_062015 for L90 D410.


It is installed from any firmware (5.0.2, 4.4.2 and others).
Established by rekaverirespected oleg2903 (New design, from my point of view is more pleasant)
do not forget to thank the distinguished oleg2903 rekaveri for it;
Changes from L90_D410_v20c_Balanced_062015:
- integrated custom L.E.K._v1.0_r2_d410.zip core from 08.05.2015;

Removed some Google apps:
- GoogleBackupTransport - backup applications and settings to
account (Titanium_Backup for backup is in every way better);
- GoogleFeedback - Google feedback service with users (reviews about the Market);
- GooglePartnerSetup - Google feedback service with users;
- Gmail2 - Gmail (you can go to your Gmail through standard
LGEmail)
- Newsstand - Google Play Newsstand;
- Videos - Google Play Movies;
- ChromeWithBrowser - Chrome browser;
- Drive;
- Music2 - Play Music

Removed some LG applications:
- LGPCSuite;
- LGPCSuiteUI;
- LGSmartWorld;
- PlayGames - LG Games;
- Books;
- LGCb - Cell Broadcasting;
- LGBoxnet - Box (storage and file sharing from LG);

- YouTube;

https://yadi.sk/d/xp9fkI6BhcBDQ
Installation:
Do not forget to backup.

The installation process is described for CWM rekaveri.

1. Download the firmware and copy it to the root of the SD card.
2. Go to the recovery.
3. We do wipe data / factory reset, wipe cache partition,
we go to the advanced point, do wipe dalvik cache, return to the main recovery page,
go to the mounts and storage item, do format / system, format / cache, format / data and return to the main recovery page.
4. Select the install zip item, then choose zip from / external_sd and select the firmware file.
5. We are waiting for the firmware to be installed.
6. Return to the main recovery page and reboot by selecting the reboot system now option.
(if a suggestion arises: - Yes - Fix root (/ system / xbin / su) select it).

After setting EEPROM advise - clean RAM via Memory Booster,
remove unnecessary applications from "Startup",
once again clean the RAM using the Memory Booster, configure everything you need for yourself,
give the body an hour to "get comfortable" with the new firmware.
Settings KernelAdiutor 0.9.7:
Only those points where changes are made are given.
After setting the values ​​in each items where the values ​​have been changed,
enable at the top of the item - "Apply at boot".

CPU

CPU scheduler - pegasusq or intelidemand

CPU Hotplug

MPLDecision - Off.
IntelliPlug - On.
Alucard control - Off.

or:

MPLDecision - Off.
IntelliPlug - Off.
Alucard control - Incl.

Graphics processor

Maximum GPU frequency - 533 MHz or 450 MHz
GPU simple algorithm - On.
Laziness - 0

Battery

Fast charging - On.

I / O Scheduler

INNER MEMORY

Scheduler - vr or cfq
Read Ahead - 4096 kB

auxiliary memory

Scheduler - vr or cfq
Read Ahead - 4096 kB

Low memory killer

Choose - Easy

Entropy

Read - in 2048 or 4096
Write - in 2048 or 4096

Other controls

Dynamic Fsync - On.

Settings

Hide application messages during
boot time - On

Notifications - Off

After this, it is advisable to reboot the bodies and check the settings.


Post has been editedUNS4 - 15.08.15, 15:44
Reason for editing: Added to header



Rep: (182)
* UNS4, If you can, put your screenshots modified firmware (for clarity)



Rep: (3101)
Dear Colleagues!
Some screenshots of the firmware for L90_D410_v20c_Balanced_062015 L90 D410.
Screenshots:
Attached Image
Attached Image
Attached Image

Attached Image
Attached Image
Attached Image

Attached Image
Attached Image


We unfortunately I still can not normally run on Xposed v20c.

Post has been editedjlpubet - 02.07.15, 09:04
Reason for editing: Added to header



Rep: (0)
I can not get on the Root lg l90 (5)
After writing: sh /data/local/tmp/g2_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip / data / local / tmp / busybox
Click interval, and nothing happens)
Prior to this, as did 4.4 all worked out

Post has been editedKulikovkpk - 02.07.15, 01:12



Rep: (2004)
Kulikovkpk @ 02.07.2015, 01:11*
I can not get on the Root lg l90 (5)
After writing: sh /data/local/tmp/g2_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip / data / local / tmp / busybox
Click interval, and nothing happens)
Prior to this, as did 4.4 all worked out


That's tried?
LG L90 - Firmwares (OS 4.4 - 5.0) (Post UNS4 # 40433806)



Rep: (8)
UNS4 @ 01.07.2015, 12:00*
Firmware L90_D410_v20c_Balanced_062015 for L90 D410.

I sew without problems.
Everything works well, fast.
One question to the SW.UNS4 .
After the firmware configuration issue MMC. I can not edit the APN access point or internet or MMS.
Maybe it is a problem and not flashing, how to fix or improve any image.
Screenshot
Attached Image
Attached Image


Post has been editedmususek - 02.07.15, 09:09



Rep: (84)
mususek @ 02.07.2015, 09:07*
I can not edit the APN access point or internet or MMS.
It's okay. This standard operator settings. Their you can not change or delete. Just create a new desired APN and select it as active.

Post has been editedCrazyzyst - 02.07.15, 10:53



Rep: (0)
AlexUnder (UA) And other ways no longer work? THERE hassle odd lot this way)



Rep: (2004)
Kulikovkpk @ 02.07.2015, 12:23*
AlexUnder (UA) And other ways no longer work? THERE hassle odd lot this way)


Yes please))

LG L90 - Firmware (OS 4.4 - 5.0) (Post Remix96 # 38696794)

LG L90 - Firmwares (OS 4.4 - 5.0) (Post Andruxa666777 # 38561209)

LG L90 - Firmware (OS 4.4 - 5.0) (Post rjlexx # 40550408)


LG L90 - Firmware (OS 4.4 - 5.0) (Post Andruxa666777 # 41125474)



Rep: (182)
K
Cleaned the subject
* inzaghi21,
* Nikolay767,
* AlexUnder (UA),
* stand65,
* UNS4,
* vit9668,



Rep: (8)
CrazyST @ 02.07.2015, 10:41*
It's okay. This standard operator settings.

Thanks for the advice, but it glyuknul MTS SIM or after certain operations on the SIM I can edit all settings.
It all worked.
Screenshot
Attached Image



Rep: (397)
Dimon55584
M


Full version    

Help     rules

Time is now: 15/10/20, 19:31