Explay X-tremer - Firmware (OS 4.2)
under the messages to which you want to add links. Patriot-Svm @ 09.11.2014, 12:49
P.S. Found!
Fantom95fr, You limit the memory on the drain, in the header two ways: patch and flash drive, install the firmware and follow this patch!
Post has been editedsmartfen632 - 09.11.14, 15:36
What firmware is better than LG G3 or Android L Blue Mod Stable V3? And in general, what firmware on 4.4 will you advise? Preferably with good autonomy. + I promise the lump)
Qadron @ 09.11.2014, 17:02
What firmware is better than LG G3 or Android L Blue Mod Stable V3? And in general, what firmware on 4.4 will you advise? Preferably with good autonomy. + I promise the lump)
Put that and that. I have an incorrect approximation sensor for BLUE MODE. Now the fourth day on the LG G3 there are no problems. The battery keeps normally, it seems not noticeable that more expenses compared to the drain 1.03. The firmware is a pleasant eye, bright, dark stock has already been tired of incredibly.
patriot-svm After your tips, LG G3 firmware I starts like! It works so everything, it is probably the most working out of 4.4. If ART is increasing and still unknown can and works that applications are longer it seems to be installed
Post has been editedsmartfen632 - 09.11.14, 18:07
SMARTFEN632 @ 09.11.2014, 18:03
If ART is increasing and still unknown can and works
It does not work, this is a port with Fly IQ451. I had this device and I put this firmware (LG G3). And there Art did not work, I think that and here it does not work. By the way, we have a version of LG G3 V0.5 Although for a fema has long ago made V0.8
Here is the test antutu firmware LG G3
Here is a test of stock firmware 1.03
Post has been editedsmartfen632 - 09.11.14, 21:19
 |
 |
Here is a test of stock firmware 1.03
 |
Post has been editedsmartfen632 - 09.11.14, 21:19
Changes in the area of ​​± 300 are not taken into account, because this change can occur due to different parameters: phone temperature, battery charge, included Wi Fi, etc.
What to do, does not connect to the computer for flashing flash drive, in office. The computer in turn does not make any sounds. Firewood is installed.
Gapps Light: https://yadi.sk/d/p0hnhikvcrg9o.
Gapps put immediately after the firmware without leaving the recovery
Information
Coloros firmware, port from the Turks
Features of the firmware
Works smartly, no percent
Minuses
When you first start systemUi.apk error does not pay attention to never come out
Screenshots
 |
 |
 |
 |
 |
Express my thanks
Warezz37
Installation
1. Download the firmware and throw it intomemory card root (/ sdcard)
2. Go to Recovery:
On the phone off, hold down the buttons:Volume up + turn on
3. Choose an itemWipe data / factory reset
4. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
5. Choose firmware
6. We are waiting for the firmware to be installed. "
2. Go to Recovery:
On the phone off, hold down the buttons:Volume up + turn on
3. Choose an itemWipe data / factory reset
4. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
5. Choose firmware
6. We are waiting for the firmware to be installed. "
DjMishGuN, Can COLORKAT can be put on the incentive memory?
Who can say, is it for swap on the firmware LG G3?
 |
Post has been editedshoma_81 - 12.11.14, 09:48
Reason for editing: merged messages
SmartFen632 @ 11/10/2014, 05:34
DjMishGuN, Can COLORKAT can be put on the incentive memory?
I put, it works for me
DjMishGuN, Update Please reference to Dolby Digital for LG G3Explay X-Tremer - Firmware (OS 4.2) (post # 35034959)
Andrey-Paa @ 11/10/2014, 07:24
Update Please link to Dolby Digital for LG G3 (post # 35034959) [/ url]
Update, I will update, but also the same link working!
DjMishGuN, Who set the ColorKat OS 4.4.2 Art mode works?
Post has been editedkot2045 - 10.11.14, 08:07
Colorkat OS 4.4.2.
ART does not work
Video writes
USSD is running
USB OTG does not work
no_sd mod boot
Post has been editedMarkoff - 10.11.14, 10:30
ART does not work
Video writes
USSD is running
USB OTG does not work
no_sd mod boot
Post has been editedMarkoff - 10.11.14, 10:30
How to get root on COLORKAT? Framaroot does not work
On the transmitted memory climbs "memory damaged" although everything works
PatchExplay X-tremer - Firmware (OS 4.2)The inscription removed!
Root Received, with Chinese Baidu Root with Hieroglyphs
DjMishGuN,
The volume on the player is very quiet on the Colorkat, what to do? Engineer all sprinkled already!
Post has been editedshoma_81 - 12.11.14, 09:48
On the transmitted memory climbs "memory damaged" although everything works
PatchExplay X-tremer - Firmware (OS 4.2)The inscription removed!
Root Received, with Chinese Baidu Root with Hieroglyphs
DjMishGuN, The volume on the player is very quiet on the Colorkat, what to do? Engineer all sprinkled already!
Post has been editedshoma_81 - 12.11.14, 09:48
Reason for editing: merged messages
Ruth for Coloros.
https: //play.google.co...koushikdutta.superuser
The battery sucked in half a day. Perk dubbing by 80% constantly.
Post has been editedMarkoff - 10.11.14, 15:57
https: //play.google.co...koushikdutta.superuser
The battery sucked in half a day. Perk dubbing by 80% constantly.
Post has been editedMarkoff - 10.11.14, 15:57
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement