teXet TM-7024 - Firmware



Rep: (248)
teXet TM-7024 - Firmware
PictureteXet TM-7024
Description | Discussion | Firmware

Important information
Who has Wi-Fi on the chipsetRalink(it is possible to learn through ADB, the lsmod command)in firmware 4.2.2 it will not work!Decisionlooking for.

Drivers and Utilities

Firmware
Official firmware

Unofficial firmware
Unofficial firmware (4.1.1)

Unofficial firmware (4.2.2)


Instructions
Instructions for changing software
1) Turn off the device.
2) Connect to PC.
3) Run the utility. Select firmware (SelectImg)
4) Hold the HOME button, insert the cable and press the ON button (short press 5 times). Windows will detect the new device.
5) Install the driver (for 64bithttp://texet.ru/save.php?file=/files/UsbDr...1333694087.rar).
6) Reconnect the device to the PC.
7) When asked about formatting, click Yes, then Yes again.
8) Wait until the end of the software change process.

Firmware via PhoenixCard (for those who can not flash through LiveSuit)


miscellanea

Survey Screenshots
Attached Image



There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 10.04.19, 00:26
Reason for editing: Application drain from TeXeT TM-7024 Android 4.0.4 firmware



Rep: (248)
cenja79,
And you lsmod from 4.2 let's see.



Rep: (30)
FiliN271,
4.2 realtekovsky only, but with a strong desire and I think you can run ralink (init.d scripts to help). The modules, which are subject to the Wi-Fi, are (as I understand) script.bin curve and therefore a subject refuses to boot. Well, and certainly if the conversation turned to script.bin, ie request: need script.bin not my device with android 4.0.4 and 4.1.1, and 4.2.2 may be



Rep: (30)
How to get to script.bin and script0.bin files

C PC
Enter the command line / terminal here are the teams:
1. Create a folder on the flash drive:mkdir / sdcard / nanda
2. Mount the unit "nanda" to the new folder on the flash drive:mount -t vfat / dev / block / nanda / sdcard / nanda
3. Now follow to set up our folder "nanda" on flash drive
4. To be precise, we copy the entire folder "nanda" on the computer. This folder contains files and script.bin script0.bin.
5. Once all copied, do not forget to unmount "nanda" command:umount / sdcard / nandaotherwise okirpichetes (fly off the loader, in consequence of which the device will need to reflash)


From tablet
We need a program:В® Superuser , В® BusyBoxandAndroid Terminal Emulator
- install Superuser, update su binary if necessary
- install Busybox and from the program make its installation.ON 4.0.4 DO NOT INSTALL OR UPDATE(There are already update will reset to factory settings without)
- Terminal emulator to introduce the following:
su
mkdir / sdcard / nanda
mount -t vfat / dev / block / nanda / sdcard / nanda
cp /sdcard/nanda/script.bin /sdcard/script.bin
cp /sdcard/nanda/script0.bin /sdcard/script0.bin
umount / sdcard / nanda

Attention is important!
Be sure to enter the command "umount / sdcard / nanda" otherwise after turning off the device fly off the loader, in consequence of which the device will need to reflash.
- pick up the files on the built-in sdcard folder "nanda".


For editing

converter bin2fex
- unpack the archive and put back script.bin and click bin2fex.exe
- will file script.fex, you can open it as a text program such as Notepad ++, AkelPad.
- edit what you need.
- after edits and save the envelope it back in by pressing the .bin fex2bin.exe
- Now everything is ready, you will be immediately and a copy of the file script0.bin


Import Script.bin the plate after change

C PC
1. Mount the unit "nanda" to the new folder on the flash drive:mount -t vfat / dev / block / nanda / sdcard / nanda
2. Open the folder and replace the files on the changed.
3. Once all copied, do not forget to unmount "nanda" command:umount / sdcard / nandaotherwise okirpichetes (fly off the loader, in consequence of which the device will need to reflash)
4. Reboot.


From tablet
- script.bin script0.bin and a copy put on sdcard (internal memory)
- Terminal emulator to recruit:
su
mkdir / sdcard / nanda
mount -t vfat / dev / block / nanda / sdcard / nanda
cp /sdcard/script.bin /sdcard/nanda/script.bin
cp /sdcard/script0.bin /sdcard/nanda/script0.bin
umount / sdcard / nanda

Attention is important!
Be sure to enter the command "umount / sdcard / nanda" otherwise after turning off the device fly off the loader, in consequence of which the device will need to reflash.
- Reboot ..


To simplify all the action on your computer recommend usingAndroid ADBand Total Commander, respectively.
You can still check out the example here9 "Capacitive Touch Screen Tablet PC with Allwinner A13 - Firmware (OS 4.0) (Post # 25057500) ,Ritmix RMD-1030 / Onda VI40 - Firmware (Post # 18238567)well, or search by clicking the link above.

p.s. All actions performed with the firmware and with themselves tablet you are at your own risk. For damage to your property, nobody is not responsible.

K
Added to the header


Post has been editedFiliN271 - 21.01.14, 00:57
Reason for editing: Supplement



Rep: (25)
People, please give a link for downloading 4.2.2, for the English I am a complete and 0 is the link that leads to the hat some strange for me .. and the site is still there to register, this I got it!



Rep: (248)
K
Changes in the cap :

-Added instructions on Script.bin, thankscenja79
-Added a link to an alternative file sharing for jumps and modules 4.2.2.

upd.
-Added a reference to "all at once". Thank you alsocenja79


Post has been editedFiliN271 - 23.01.14, 21:14



Rep: (2)
Guys who know how to sew Planche linux?



Rep: (248)
Inverc,
Through the Virtual machine.

Put the dynamics of the E398 here is the sound .....: lol:

Post has been editedFiliN271 - 23.01.14, 15:40



Rep: (30)
Maybe someone will wonder rekaveri assembled into one file with a clear-installer script. In TWRP and CWM archive for 4.0.4 and 4.1.1-4.2.2 Try. Attached here and added to the "All At Once"

Attached files

Attached fileCollection recovery.zip(25.69 MB)


Post has been editedcenja79 - 24.01.14, 17:58
Reason for editing: error in the script. Fixed.



Rep: (248)
To all: Do not forget to thank the person raising the reputation, it is not for me trying, but for all.

Post has been editedFiliN271 - 24.01.14, 19:07



Rep: (46)
ie on the Wifi module on firmwareFaaastJB-v2.5Here is a picture obtained in the fileinit.sun5i.rc

drew attention to paragraph # 1.1 and # 1.2

file init.sun5i.rc
#network module
insmod /system/vendor/modules/asix.ko
insmod /system/vendor/modules/qf9700.ko
insmod /system/vendor/modules/mcs7830.ko
insmod /system/vendor/modules/rtl8150.ko

insmod /system/vendor/modules/device.ko
exec / system / bin / insmod_device

# WEXT: only support sta
#service wpa_supplicant / system / bin / wpa_supplicant -Dwext -iwlan0 \
# -C / data / misc / wifi / wpa_supplicant.conf -e / data / misc / wifi / entropy.bin
# class main
# Socket wpa_wlan0 dgram 660 wifi wifi
# Group system wifi inet
# disabled
# oneshot

# 1.1 realtek wifi sta service
service wpa_supplicant / system / bin / wpa_supplicant -iwlan0 -Dnl80211 -c / data / misc / wifi / wpa_supplicant.conf -e / data / misc / wifi / entropy.bin
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot

# 1.2 realtek wifi sta p2p concurrent service
service p2p_supplicant / system / bin / wpa_supplicant \
-ip2p0 -Dnl80211 -c / data / misc / wifi / p2p_supplicant.conf -e / data / misc / wifi / entropy.bin -N \
-iwlan0 -Dnl80211 -c / data / misc / wifi / wpa_supplicant.conf
class main
socket wpa_wlan0 dgram 660 wifi wifi
group wifi inet #add by paco
disabled
oneshot



question for this, who will throw a file with the firmware takoyzhe Stoke and 4.1.1 ???

cenja79 It is for you Attached filescript4.2.2.rar (5.3 kb)
With firmware .... which is described above ....


+++

here's anotherAttached filescript 4.1.1.rar(5.14 KB)


Post has been editedPesots - 25.01.14, 13:19
Reason for Editing: script 4.1.1 added ..



Rep: (30)
Pesots @ 25.01.2014, 13:04*
4.1.1

import init.sun5i.usb.rc

on early-init
export EXTERNAL_STORAGE / mnt / sdcard
mkdir / mnt / sdcard 0000 system system
# for backwards compatibility
symlink / mnt / sdcard / sdcard

mkdir / mnt / extsd 0000 system system
mkdir / mnt / usbhost1 0000 system system
mkdir / databk 0700 root system

on fs
mount ext4 / dev / block / nandd / system wait noatime nodev barrier = 0

# try to mount / data
wait / dev / block / nande
mount ext4 / dev / block / nande / data wait noatime nosuid nodev barrier = 0
setupfs / dev / block / nande
umount / data
exec / system / bin / logwrapper / system / bin / e2fsck -y / dev / block / nande
exec / system / bin / busybox mount -t ext4 -o noatime, nosuid, nodev, barrier = 0, journal_checksum, noauto_da_alloc / dev / block / nande / data

# try to mount / cache
mount ext4 / dev / block / nandh / cache wait noatime nosuid nodev barrier = 0
setupfs / dev / block / nandh
umount / cache
exec / system / bin / logwrapper / system / bin / e2fsck -y / dev / block / nandh
exec / system / bin / busybox mount -t ext4 -o noatime, nosuid, nodev, barrier = 0, journal_checksum, noauto_da_alloc / dev / block / nandh / cache

format_userdata / dev / block / nandj novo7Legend

#try to format / databk
wait / dev / block / nandi
mount ext4 / dev / block / nandi / databk wait noatime nosuid nodev barrier = 0
setupfs / dev / block / nandi
umount / databk
rmdir / databk

on boot

#insmod key & tp driver
#insmod /system/vendor/modules/sun4i-ts.ko
insmod /system/vendor/modules/gsl1680.ko

#insmod mali driver
insmod /system/vendor/modules/ump.ko
insmod /system/vendor/modules/mali.ko

#insmod video driver
insmod /system/vendor/modules/cedarx.ko
exec / system / bin / sh /system/bin/setupsensors.sh

#csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
#insmod /system/vendor/modules/gc0308.ko
insmod /system/vendor/modules/sun5i_csi0.ko
#insmod /system/vendor/modules/gc0307.ko

#network module
#insmod /system/vendor/modules/asix.ko bsize = 0
#insmod /system/vendor/modules/qf9700.ko
#insmod /system/vendor/modules/mcs7830.ko
#insmod /system/vendor/modules/rtl8150.ko
#insmod /system/vendor/modules/8188eu.ko
insmod /system/vendor/modules/asix.ko
insmod /system/vendor/modules/qf9700.ko
insmod /system/vendor/modules/mcs7830.ko
insmod /system/vendor/modules/rtl8150.ko
insmod /system/vendor/modules/8188eu.ko
insmod /system/vendor/modules/rt5370sta.ko

# WEXT: only support sta
service wpa_supplicant / system / bin / wpa_supplicant -Dwext -iwlan0 \
-c / data / misc / wifi / wpa_supplicant.conf -e / data / misc / wifi / entropy.bin
class main
socket wpa_wlan0 dgram 660 wifi wifi
group system wifi inet
disabled
oneshot


On 4.2.2 script.bin obtained from modules touch.



Rep: (46)
damn, that's only toolko 4.1.1 obranto flashed))))

Well temnemenee wafer after work .... then what assumptions?

Post has been editedPesots - 25.01.14, 13:13



Rep: (46)
cenja79 I understand that the lines marked # do not participate at boot =>4.2.2 driver to throw our waffles, and changed under realtek ....



Rep: (248)
Pesots,
Well, if you have ideas for ralinka run on 4.2.2, I can assist, any way I can. Linux is installed, the program ... So you say.

Post has been editedFiliN271 - 25.01.14, 14:55



Rep: (30)
FiliN271 @ 25.01.2014, 15:54*
if you have any ideas for ralinka run on 4.2.2

I have dug, but ... I have realtek, and no problem at hand seriously study the problem. Especially since I'm more method scientific study, change, something like this: blush:
Pesots @ 25.01.2014, 15:48*
lines marked # are not involved when the system boots

It turns out that it is not loaded, but how and where it is more difficult to change. You can try through scripts in the init.d to start the desired module, that's just not the fact that the module will work.
Now I try at tweaked to run on the module instead ralink realtek.

Post has been editedcenja79 - 25.01.14, 19:11



Rep: (30)
Well, make that I did not run wi-fi turned, run ralinovsky module happened, according lsmod. Spread boot with a script to 4.2.2, which works for me, and wi-fi module starts ralink (arhiv1), as well as which does not work realtek, but the two modules run (arhiv2). Who has the desire probuyte.Ustanovka - run run.bat.

Attached files

Attached filearhiv1.zip(4.98 MB)
Attached filearhiv2.zip(4.98 MB)



Rep: (46)
cenja79, but I myself also use this method ......))))
I tried on firmwareFaaastJB-v2.5 neither the first nor the second broken, Bole, the lost volume buttons (as the drain), well, the truth exactly nezametil after a file .....
I tried razpakovat your .img Thu nifiga nepoluchilos ......

generally I just stupidly tried to make changes in the file init.sun5i.rc through Commanderie saves, but after reboot it dies file gets the initial state (ie. that was to change with dob WiFi), =>value it comes with d.rugogA place ....... I HZ need to fumble deeper well or alternatively write this dude who picked firmware .....))))

FiliN271, but if I knew that is responsible for what)))) and how razpokavat firmware ..... (currently only looking for the Old) ....


+++++
LogCat.txt file in the way if the total is over look is such Situevina wrote after The wafer torment ...
LogCat.txt
01-26 11: 59: 49.130 D / WifiHW (343): faied to read proc / net / wireless 01-26 11: 59: 49.130 D / WifiHW (343): loading wifi driver ...



Che found still here ....
TyTsTs

Post has been editedPesots - 26.01.14, 14:44
Reason for editing: ++++



Rep: (248)
Pesots,
Well, let's cooperate somehow, great progress already.



Rep: (46)
FiliN271,
so here I am about it, the brain simply is not enough as the firmware file to unzip ..... themes found on Windows can not ....



Rep: (248)
Pesots,
Write to QMS


Full version    

Help     rules

Time is now: 10/05/20, 00:54