The problem is that all native firmware for this router curves. I knew a long time with a connection to it 667 modem until I reflash the router.

Tell me, maybe in this modem change IMEI? And who stitched, successfully everything was

My modem from Bilayna blocked thanks to this forum, everything is successful, the router determines it, the Internet shakes, now I have in modem mode

And yet, you can substitute IMEI from your old smartphone?

Post has been editedandryam - 17.03.16, 19:39

What a stupid question??? In the header everything is: yes2:

Posted on 03/17/2016, 19:50:


The modem absolutely do not care what they have

Posted on 03/17/2016, 19:51:

Well, if the speech goes about iota - then I said the very first and proved that Yota works with this modem

der_KeTZeR , where I saw the IMEI numbers need to turn, and what if I already have imei from another smartphone (not useful for a long time) specify it?
And then there were messages that I could not change, so I decided to ask, really everything would work out.

Regarding where to use, I plan to connect SIM card from MTS. SMART NONSTOP tariff, for their tariff is only for smartphones, but I do not know if I substitute IMEI from your smartphone whether to get around protection. Somewhere else I saw that you need to change TTL, but if the modem connect to the router which will be connected via WiFay multiple devices will not be problems?

Iota do not plan to use

In fact, I do not plan to use nutrition, torrents, etc., just ordinary surfing, well, can online something there or YouTube.

Post has been editedandryam - 17.03.16, 20:02

Well, yes, you need, this is when I have changed, i.e. then (after shifts) - everything will look normally.

If there are hands from the right place - then there will be no problems.

This is for iota

In theory, there should be no problems

Ie, the numbers of the native modem are reversed, or from another device forms a smartphone? I can substitute IMEI from my smartphone?
I apologize if I ask stupid questions ..

Tomorrow if you turn out, I try to pick up a modem from work and make an operation

Post has been editedandryam - 17.03.16, 20:32

It is stupid: yes2:

This is this: yes2: (everything is written in the instructions)

I have recently appeared. If you connect this modem to the laptop, the Internet works stable. If you connect to a computer, the Internet starts to behave unstable. In online games, it begins to dramatically increase the ping and return back, as well as sharply scatters speed and also returns back. Interested to reinstall And drivers on a computer. It did not help.

435,
Try to put the last firmware, try yusb elongator, well, on the extreme - try to put the radiator on the processor (some helped)

der_KeTZeR , I tried a USB-extender the Internet dies, I tried without even worse. If you put the firmware with the Web interface.

Is there a new firmware with a connector-manager (a modem from biline)?

no, if only then translate into port mode and put a connector manager

I finally raised my modem.
No full full of Internet approached.
The modem fell all the time in the HS-USB QDLoader 9008 mode, even after the * .mf bay from Medusa-Box,
Sometimes it had to raise ports through the needle.
Fortunately, there is a firmware.
Ultimately ->poured the firmware via QPST (* .MBN) ->The modem rose.
<---->
I merged Medusa-Box-Jtag ->Full full * .bin

By the way, if the modem does not switch to the download mode command (qcommand -p<xxx>-E -c "C 3A"),
Try the team ->(qcommand -p.<xxx>-E -C "C 08")

By the way, Medusa ->Does not "drop" this modem, even through JTAG - always an error.
Previously, you need to translate the modem in Download Mode !!!

Hello!

Please tell me why the modem may not see SMS?



Accordingly, when requested SMS, nothing is returned:

If anyone is useful, the modem can be translated temporarily to port mode by simply launching its firmware utility,
Without directly firmware.
Those. In the instructions on unlocking instead of transition to Webui Proser
http://192.168.0.1/gof...ITCH&switchCmd=FACTORY
and subsequent return command
AT + ZCDRUN = F
You can run the firmware program, wait until it translates the modem to port mode, close the program.

In this mode, the modem will be temporarily, before reversing it from USB.
(True on MF667WebDL_B02.exe and MF667WebDL_B05.exe)

Do not kick much if it was already

This method is known and long ago.
Only what he sideways to MF667 is not clear.
The modem "falls" in Factory - without problems, during the firmware.

Modified "Under itself" the last firmware B05, adding the following features:

• Added access points for different providers (outdated from another firmware)
  
• Changed the default point to "MTS"
  
• Activated connection autorun mode
  

Well, I decided to lay it out for everyone, suddenly someone also relevant ...

PS If you still need to add access points, thenit is better to use the original firmware.


MF667WebDL_B05.zip.(17.95 MB)


Post has been edited_AI_ - 15.09.18, 17:45

skb,
I have the same problem. Have solved the problem?

What is it like? o.o: rofl:

And what are you restored there? And what is there no one with anyone or something else?

And what, there is no such thing in your native firmware? : Laugh_Wild: