> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Samsung GT-I9300 Galaxy S III - Official firmware



Rep: (748)
Samsung GT-I9300 Galaxy S III - Official firmware
PictureSamsung Galaxy S III, SGS3, GT-I9300, m0
Description | Discussion | FAQ | Accessories | Marriage / Repair | Wi-Fi setup and problems | Power consumption (autonomy) | Editing system apk | Modified and stock kernels | Custom recovery | EFS Recovery (IMEI)| Firmware:Official | Custom | MIUI | OpenSource ( 4.x | 4.4 | 5.x | 6.x-7.x ) | Topics for CM12 / 13

Drivers and Utilities
Firmware



Firmware instructions
Frequently asked Questions
AT : What is the best firmware for Samsung Galaxy S3 I9300?
ABOUT :Best firmware

AT :How do I get the Samsung Galaxy S3 I9300 firmware update?
A: There are several options for receiving updates:
1. Wait for the phone to notify you that there are updates for your phone. To do this, in the "Settings" menu ->"About the device" ->"Software Update" checkbox "Auto Update".
2. Install the Samsung Kies program on the Windows computer, connect the phone to the computer and wait for the update notification in the Kies program.
3. With the help of instructions, firmware, tools and explanations presented in the header of this topic. It is very useful to understand the essence of the process.

AT :Where can I download the user manual
ABOUT :By this link

AT :The Russian keyboard is displayed, and prints in English
ABOUT :Decision.

AT :Where can I see the modem version and firmware version?
A: In Settings-About device-The firmware version is the version of the modem (transfer curve from Samsung), the Build number is the firmware version.

AT :How to change regional binding (Sales code, CSC)?
ABOUT :I have 4.0.4

AT :How to check the regional binding (Sales code, CSC), why does the code * # 272 * (your IMEI code) # not work, why does the CSCSelect program not work?
A: On firmware 4.0.4, this information is checked by dialing * # 272 * (your IMEI code) #. On firmware 4.1.1 and 4.1.2, the code * # 272 * (your IMEI code) does not work. This code can be seen in stock recovery (text in yellow, line - Applied the CSC-code: three letters of the code) and in the Kies program in the firmware version at the end in brackets.

AT :When I try to update by air (FOTA), in response, he writes me: Access to the software service is provided to users one by one in the order of request.
A: According to some data (there are reports of a successful update), you can get a FOTA update without a queue early in the morning, around 5-6 am by MSK. If you do not want to wait for the queue, you can update via Kies / Odin PC / Mobile Odin.

AT:Installed 4.1.2, flashing single-file 4.1.1 or 4.0.4, after the firmware Samsung screen saver hangs and then the phone does not boot, what should I do?
A: You will have to do Wipe with everything and Dalvik Cache and Cache and Data / Factory from Recovery, since there are different databases, so take care of saving your data. Just installing over will lead to Bootloop and the phone will not load further. And just resetting it to the factory settings will not help, all Wipe needs to be done from Recovery. Upgrading runs without problems, and downgrading carries some problems that can be solved, but problems В© vasyadubov

AT :How do I remove the root?
A: In SuperSu, on the Settings tab.

AT :Why is the update on OTA not going?
A: With custom recovery there will be no installation of OTA updates. So for the installation of OTA-updates, the recovery is used and there is still no custom recovery working on the stock algorithm with which and only OTA-updates are installed.

AT :How to add languages ​​to enter the firmware 4.1.2, if they are not?
A: "Menu" - "Language and input" - "Samsung keyboard" - "Gear wheel" - "Input languages" - "Available languages"

AT :When changing CSC with CSC Select, the message "preconfigui does not support single csc" appears
Рћ: You have a phone with carrier firmware and a single region, so there is nothing to display, besides, it can be locked under an operator

AT :How to download i9300 Galaxy S3 in Firmware Mode / Download Mod / Download Mode?
Рћ: Loading the device by simultaneously pressing the buttons "Volume down" + "Home" + "Switching on" / "Vol Down" + "Home" + "Power". Exit this menu - long press the "Power" / "Power" button.

AT :How to load I9300 Galaxy S3 into Recovery Mode / Recovery Mode / Recovery Mode / (CWM Recovery / TWRP Recovery, if installed)?
Рћ: Loading the device by simultaneously pressing the buttons "Volume up" + "Home" + "Switching on" / "Vol Up" + "Home" + "Power"

AT :Touchwiz drops when you delete the desktop, everything was fine before the update!
A: ReadFast.

AT :What applications can I remove painlessly from the firmware?
ABOUT :Here is a list(if it saysYes it does not mean that you will not need the application).

AT :I want to get rid of system update notifications, what should I do?
A: The simplest way (Root is required) is to freeze or delete 2 files from / system / app:FotaClient.apk and FWUpdate.apk

AT :How to reset the counters and that the state would be "Normal"
ABOUT :Here is a simple instruction

AT :What is the difference between 1-file, 3-file and 5-file firmware?
A: Mostly the differences are in the content, but the result may differ. 1-file firmware is official, 3-file firmware - service 4.0.4, and 5-file firmware isDetails

AT :What is the SS_DL.dll file for?
A: He is not needed. It can be removed

AT :On 4.1.1 or 4.1.2 the indicator has become dimmer
Oh yeah. This feature 4.1. He now looks at the light sensor and, depending on his data, sets the brightness of the indicator

AT :After the firmware sdcard became sdcard0
A: Starting from 4.1 so for everyone

AT :What Root is needed for my version of Android
A: For 4.0.4 and 4.1.1 CF-Root, Auto-Root, ExynosAbuse. For 4.1.2 CF-Auto-Root

AT :After upgrading to 4.1.1, Flash does not work.
ABOUT :Here is the solution

AT :How to connect the phone as USB flash
A: None.Details

AT :Can I flash my phone with operator firmware?
A: You can.

AT :When sending SMS, the recipient receives one question mark.
A: To send SMS in the SMS settings, set the input mode: Automatic.

AT :After firmware 4.1.1 (4.1.2) in Recovery mode, the robot lies with an exclamation point. What does it mean ?
A: The fact that you have firmware 4.1.1 (4.1.2) and this is stock recovery. Nothing else.

AT :Does stock recovery come in single-file firmware and how can it be restored?
A: Yes, enters. You need to flash it again with your firmware.

AT :How do I replace the font in the phone ?
ABOUT :Link. All questions in the link on the topic.

AT :Where can I find Service Manual?
A: Bby thispost

AT :What should I do if the memory card is not visible from the computer, but does the CWM see it?
A: Decision inby thispost

AT :What is the difference between Odex and Deodex firmware?
ABOUT :This is what.

AT :I put it in one of the Root methods, and no rights are given to applications, and SuperSU applications (or Super User) are not in the program menu
A: You need to put SuperSU from the Market.

AT :Does CF-Auto-Root modify the stock core or not?
A: CF-Auto-Root-m0-m0xx-gti9300 establishes stock recovery from 4.1.2 and adds 3 files to the system in order to obtain root-rights and control the receipt of other root-access programs through SuperSU. It is here called rutovanny stock.

AT :How to enter the "Developer Options" on 4.2.1, 4.2.2 or 4.3?
A: It is necessary in the Menu / Settings / Options / About the device - 7 times to tap on the assembly number and everything will appear.

AT :How to make a wipe?
Рћ: In stock Recovery, make wipe data / factory reset and wipe cache partition.

AT :Tell me how to determine which bootloader is currently installed on the phone?
Рћ: Use the programAndroid System Info. System section, subsection BuildInfos.

AT :After rolling back from the I9300XXEMG4 firmware, the IMEI has flown or changed and there is no possibility to call.Details.
A: The reason is that the new modem in XXEMG4 changes the format of the EFS partition and, when rolled back to earlier versions, IMEI crashes. The solution is to flash XXEMG4 back and IMEI will be restored. Or usesolution with xda


Useful information
A small FAQ on firmware 4.3
What is the difference between firmware for the CIS countries: SER, SEK, RTL, SKZ, CAC?
And what's the point in the "normal" state?
Firmware mode, recovery and how to enter into these modes?
Permissions for files and folders in the EFS folder.
What can be removed from stock applications Samsung Galaxy S III GT-I9300 in firmware from XXBLH1 (4.0.4) to XXUGOE1 (4.3) with the SER region
How to fix md5 sum error in backup
What regional application was added in 4.1.2 for Russia
About CSC and Sales Code
When the serial number starts with 0000 ... and the phone says: No network. The selected network is not available For custom recovery
Where to watch phone status?
Android from the inside or just about complicated
If from the settings menu, perform a reset or do Wipe what will happen to Root
What is the difference Samsung firmware
How Root and Custom Recovery Affect Firmware Updates
For lovers often flash. Possible consequences
Saving firmware downloaded via Kies
How to decipher the name of the firmware
About the features of installing new downloaders
How to check your Galaxy SIII (GT-I9300) for originality
Concerning dances with a sysscope and a "normal" state
What is the difference between the firmware La Fleur and the rest of the stock firmware?
How to remove a message when selecting an update over the air "Your device is changed. There are no updates"
Where does the RAM go?
What to do if your phone does not see the network or writes "No network" "The selected network is not available"
Secret Codes
About the reasons for the rally IMEI
Explanation of the new EFS formatta, patched modems and the lack of mobile communication after updating the firmware
How to enter the "Safe Mode" download
Differences between EFS Versions and Android Versions
Solving the problem with the Internet on 4.3 for Beeline owners
How to remove a translucent Factory Mode window with information about PDA, Phone, CSC, H / W, RF Cal Date, SMD,
Camera firmware(all questions - in the topic of the link).
Russian S-Voice
How to change labels in multi window to 4.1.2:Solution 1 Solution 2(All questions - in the topics on the links).How to activate multi-window?
Getting official stock firmware 4.1.2 SER without regional applications
Stock firmware for Russia with Root. Odex and Deodex
Downgrade to the old Bootloader with the new XXELLA:Method 1 Method 2 Method 3
About SDS (sudden phone death) from tester99 Sudden death fix Ultimate GS3 sudden death thread
Returning the state to "Normal" on a new bootloader and custom recovery and resetting counters
Instructions for "resetting" the counter and getting the status "Normal" using Triangle Away
Change CSC without deleting data (on XDA)(All questions in the link on the topic)
Scripts to clean the phone from the firmware and cores For 4.3
Triangle away. To reset the counter (to the status "Modified" \ "Special" is irrelevant).
Samsung Galaxy S3 Toolkit 7.0andAdb
An application that allows you to use an external ExtSD Card as a USB drive
Upgrading I9300XXLH1 SER (4.0.4) to I9300XXDLK1 SER (4.1.1) as root
Normal condition according to instructions from tester99
How to change the state of the Root phone to "Normal", while maintaining the root
Back up the system (backup) I9300 with / efs from TWRP custom recovery
For those who want to try new firmware 4.1.2 without changing their region
Transition from the old I9300XXELL4 (SER) to the new I9300XXEMA2 (XEF) with a new bootloader
Update official Russian 4.1.2 I9300XXELL4 (SER) to the new official 9300XXEMB2 (SER)
Personal experience on updating from XXELL4 to XXEMB2 from vasom
Firmware update with saving data, settings and, if necessary, resetting counters / status and firmware bootloader
How to flash Bootloader
When trying to turn on, it does not go anywhere and writesFirmware upgrade encountered an issue
How to remove the firmware from Kies
How to find out the region for which issued Samsung Galaxy S3 I9300
How to backup applications and their datawithout Root
How to flash a separate part of any single-file firmware
If you have trouble logging in to recovery
How to solve the problem if the efs folder flies (for those who installed firmware based on EMG4)
How to sign a backup EFS and how to determine from which firmware it is
The official program to raise the "littered" boot
How to find out which version of your EFS backup?
The program untie the smartphone SGSlll from the operator
The program allows you to emulate a USB cable JIG and enter the smartphone in Download Mode.
E: failed to mount / efs (Invalid argument) and how to deal with it!fromshoma_81
Problem resolution: failed to mount / system (Invalid argument)fromLichten
Stock recovery from UGMK6
Unified Android ToolKit v1.2.8 (25th April 2014)
Solving the problem with time zones after 10.26.2014 and the transition to a permanent winter time Method number 2
Incremental update FOTA (throughstock recowery)
Samfirm - utility for quick downloading of official firmware
Reset your pattern, PIN, or screen lock password
Unlock Network (Unlock)


For questions about filling and updating the topic header, contact the Curator at QMS
The curator of the topic is Vetal`M


Post has been editedVetal`M - 02.09.20, 12:18
Reason for editing: Added mirrors on some firmware



Rep: (131)
Fixed link to i9300xxelkC for Poland on Ya.Disk


K
Already in the header (link fixed)


Post has been editedNoreg - 11.12.12, 12:29



Rep: (1198)
SHQUALL @ 11.12.2012, 08:35*
I will be very grateful if you burst))


EarlierdemonstratedHow to update unwrapped SGS3 from 4.0.4 on the latest official firmware 4.1.1 with the addition of root. ThereA meteer was reset Custom firmware with Triangle away But the condition remains "changed."

Want a state "usual"? Well, useinstructionfromvasyadubov And continue to mock this device.

1. Delete the Triangle Away through the application manager: "Forcibly stop" ->"Clear data" ->"Delete".
2. After flashing you need to restoreClockworkMod recovery. Turn on WiFi, go toROM ManagerAnd click the "Install CLOCKWORKMOD Recovery" button.
3. Without closing the Rom Manager, click the "Download Recovery Mode" button. The device will restart into ClockWorkMod Recovery.
4. With the "Volume" button, select the Wipe Cache Partition menu, run the Selected Menu button. Next, select "YES - WIPE CACHE". (For those who are afraid to clean the cache, I proposethis postTo reading)
5. Click the "Enable" button and the device will reboot to normal state.
6. InstallTitanium backup(Source's rights allow).
7. In Titanium Backup, go to the Backup Copies tab, click the filter and enter SYSSCOPE. 2 process will be displayed. We click on the fact that in short in the name and click "defrost!".
8. Turn off the device.
9. We load the device in the recovery mod software at the same time pressing the "Volume + Home + Enable" buttons.
10. We repeat item 4 and 5.
11. We look at what happened. Settings menu>About device->Condition->Device status. It turned out the state "Normal".

As a result, we received a Samsung GT-i9300 Galaxy S III with old settings (because did not make Wipe Data), with ROOT rights, custom recovery, Custom firmware meter 0 and the state "normal".

Good luck to all! :-)
Picture


Post has been editedVetal`M - 08.05.17, 14:47
Reason for editing: In the header



Rep: (1198)
For those who are afraid to clean the cache programs andDelweik-Kush.

Today, for the sake of interest, fromClockworkMod recoveryFirst cleaned the cache (Menu - Wipe Cache Partition). After loading the device immediately updated YouTube. Other consequences did not notice.

Then I cleaned the Delweik cache (Menu - Advanced -Wipe Dalvik Cache). After loading the device was an alert "Update OS Android ...", i.e. Released Dalvik Cache. Other consequences did not notice.



Rep: (208)
Trane5700 @ 11.12.2012, 23:36*
Maybe the idiotic question, but it is very interested in me, do not kick ..... If you remove Touchwiz in the task manager or TitaniumBackup, then there will be a naked android casing? ..... or is it possible to do so to turn off the touch, and then return it?

Will not, you will not have a launcher.
If you want to remove the touch, then you first need to put a third-party launcher.

Posted on 11.12.2012, 22:42:

Trane5700 @ 11.12.2012, 23:36*
Or is it possible to do so to turn off the touch, and then return it?

You can also put a third-party and choose it by default, thereby tachviz off.



Rep: (386)
Tester99 @ 12.12.2012, 11:19*
Do I understand correctly that you propose to bring the device with a surcedined clean stock firmware 4.x.x (that is, either only rolled, or it out of the box) to the "normal" state of the following actions:
1. Reset the counter usingTriangle away. As a result - freezing SYSSCOPE
2. Defrosting of the SYSSCOPE process withTitanium backup
3. Reboot.

Right?

In general, this is a Kulibinsky way.
The normal way to leave from "changed" is described on the first pages and in reality Garado is easier.
After resetting the main meter, the TRIANGLE AWAY program, stupidly flashing the same firmware through mob. However (naturally with all the 5xcans)
As a result, we have stock - rutovanny - with zero counters (naturally "normal") firmware.
Next, you can forget about it and it will not be necessary to bother with these meters and status if you sew new firmware only through mob.
Conclusion :
1. TRIANGLE AWAY is needed only once to reset the main meter (after receiving the root)
2. All subsequent firmware flashing only mob. However (there will always be a root and zero counters)
3. Forget to flash through the air and through the keys
(Otherwise these all procedures will undergo anew)

Those who do not need root, all the above does not concern at all!
Their friends are "air" and "Kies".



Rep: (1198)
alex_kah @ 12.12.2012, 16:12*
I do it regularly, since when moving a photo in invisible folders, they are still visible in the gallery, but just in case (I think in vain) I turn off the memory card (all photos on the map), then clean the data and the map connection.


This is extra television. Easier aroundRescan Media ROOTEnable a scanner to update the current state. After I turn it off, whatever you work.



Rep: (1388)
Kpocab4eg @ 12.12.2012, 13:50*
goodfella,
So you have a special phone, or such. Any flashing for me changes the code (if it is not in the new firmware).



How long to :(

It has long been written and has been checked that the region code:
1. Stored in 2 places.
1.1 / System / CSC<But not sabdelia>(multiple files)
This part is rewritten when flashing.
1.2 /efs/nv_data.bin.
This can be changed only by the service code or external program. The file is encrypted.

When changing the region's code:
1. Changes are made to NV_DATA.BIN. It is this moment that the IMEI layer is potentially dangerous. It is this file that contains access codes, IMEI, SIM Lock Etc ... and it is somehow tied to the gland (they do not work strangers, personally checked)
2. Copied / SYSTEM / CSC / CSC /<new_regoin_code.>& / System / CSC / CSC with pre-cleaning of the latter.
3. Full reset is made so that the next time you apply settings from the new .xml files in / System / CSC.



If it is thoughtfully reading above written, then you can understand and where the disputes about changing regions during the firmware (I will explain that some programs are watching / System / CSC, specifically - sales_code.dat, others - in nv_data.bin) and how to change the region code, not Losing data, but not having not received the defaults of your region (Type: CWM not backup / EFS, but keeps everything else (the versions of working with / EFS already exist))



Rep: (1890)
ABOUTCSCandSales code.

Let's decide in terms because it often occurs confusion.
There are two concepts that are more or less related to each other:CSC and Sales code .
  • CSC - this is a set of installations for a particular country (region), usually including a list of network operators (providers) with their installations (what we call APN ).
  • Sales code - this country code in which the phone went on sale . Of course, this code is the same as the country code in CSC .

When the phone enters the network, it determines which countrynowis located and, if the corresponding is present on the bodyCSC , establishes a connection using data providers in this CSC .
Otherwise, the connection parameters are set (APN ) automatically "default". As a rule, these settings are correct.
But, if your provider is too smart, then it usesnon-standardconnection settings and account forAPN prescribe manually.

Easy to understand thatSales code no does not affect the parameters of the compound and its quality.
Therefore, you need to change it only to update fans throughKies in the event that the phone was purchased in one country, and they want to get the update in other country.

This is a quote from one of myold post.
It is dedicated to SGS2, but much remains relevant for SGS3.

Picture


Post has been editedVetal`M - 08.05.17, 13:55
Reason for editing: In the header



Rep: (402)
VasyAdubov @ 08.12.2012, 19:57*
Sew one mobile one inserting in the field cache cache.img (100.52 MB) Downloads: 8

Thanks made the Ser region.
For those who want, you can flash cache.img through Mobile one. You will have a SER region in the settings. Further, so that you do not mess with them and codes, I attach the applicationAttached fileCscc_select.apk.(16.6 KB)
. Install the application and after the launch you will see which region you have. Choose Ser. And click Install. The device is overloaded and you will have a SER region.
ATTENTION After changing the region, the device will be as new. All settings are deleted, including the internal card format.

This is for those who are on Polish firmware 4.1.2 wants to have SER - regional settings of Russia.

For myself, I first flashed this file. Copied the System / CSC folder. Further, in the WANAM 5.1 firmware, I changed the folder on this and left only SER. Also changed the corresponding files in the SYSTEM folder, taking them from the CSC / SER folder.
After the firmware, everything became excellent and keyboard and settings.

Post has been editedfakhri - 12.12.12, 18:30



Rep: (7)
Is there a Russian-speaking program and an EFS preservation instruction? And how best to make backup EFS?


Reservation:
a) Install a terminal from the market, get root, in the terminal run:
Code
$ su
# dd if = / dev / block / mmcblk0p3 of = / sdcard / efs.img bs = 4096
The image will be saved in the sdcard root.

b) via ADB:
Code
adb shell su -c "dd if = / dev / block / mmcblk0p3 of = / sdcard / efs.img bs = 4096"
The image will be saved in the sdcard root.

Recovery:
Terminal
$ su
Code
# dd if = / sdcard / efs.img of = / dev / block / mmcblk0p3 bs = 4096
adb
Code
adb shell su -c "dd if = / sdcard / efs.img of = / dev / block / mmcblk0p3 bs = 4096"


Post has been editedstarTum - 12.12.12, 21:22



Rep: (110)
I will bring my five kopecks and share the personal experience of flashing Galaxy S3 with i9300XXDLJ4 (SER) on i9300xxDLK1 (SER). Maybe someone will help.
So. There was a routing Galaxy S3 with i9300xxdlj4 (Ser) on board. The firmware was obtained through the OTA when the phone is first turned on after the purchase.
The first attempt to update the firmware through the kies to success did not lead (despite the fact that after the process of updating the firmware update, the KIES issued a message about its successful completion, after each turn on the phone appeared message about the update of the Android OS and the opening of applications).
The second attempt to update through the ODIN method of a simple voltage of the new version was also unsuccessful.
Decision.
1. Made a backup of all data:
- photo, video, music - on the memory card or on a PC;
- Contacts - in Google;
- Other user applications and settings have retained through titterium.
2. Full reset of all installations to factory (settings - Backup - Data Reset).
3. Pass the new version of the firmware through ODIN.
4. Full reset of all data.
After all these dances with the tambourines, the problem disappeared.
Installed roota new way. Restored all data. Enjoying success.

Conclusion: Kies - the worst enemy of users of Galaxy, IMHO.



Rep: (3013)
CMEIIIIAPUK @ 12/15/2012, 14:36*
Yes, in general, everything, I myself am shocked, even the conservation remained in the games and that the most amazing thing is not buggy

And what shocks you so much. Increased firmware version and should pass without loss of data at least whatever you have sewn, even by air, or through a voucher, or one, or mobile one, that is, the firmware on any new version of the firmware does not affect user data. The problem occurs when a rollback from the new version on the old one. In this case, the old firmware does not understand the database created in the new firmware and therefore you have to make a complete reset differently the phone will not start the logo. The exception is transitions from custom firmware on the stock, especially if custom kernels were used, in this case you need to make general cleaning when returning to the drain.



Rep: (3013)
CMEIIIIAPUK @ 12/15/2012, 15:12*
I was surprised that the root stood and everything was mastered normally without Wipe, because before that she sewed through one, there were problems that CSC flips, then the firmware does not start immediately, but I will not even talk about kies

Naturally, when you sew a firmware different from your region, then 50/50 flew CSC, on the last firmware it became smaller, and with the firmware of its regional, always everything passed and passes without problems. And in one of the PC there is no root save function and naturally executing the commands laid in the firmware when the sections of the systems and the date are lost, the root is removed. A mobile one when installing a check box to save the superuser, the root and mobile one, these sections do not lift and simply overwrites files. You are the next time when you go to the mobile Mobile, read the messages that it gives when sewing and you will be understood by the process of saving data and root.

Post has been editedvasyadubov - 15.12.12, 16:26



Rep: (192)
Vasyadubov @ 12/16/2012, 12:56*
And even simply after see, it may not work normally to flash one. It is advisable to make wipes otherwise glitches are possible.


It is believed that after customs, it is mandatory to sew the full 3 file, for simplicity and reliability. AlsoLocal craftsmanA.S._id Moved such emergency firmware on the basis of the latest versions.

Post has been editedviewer2007 - 16.12.12, 13:04



Rep: (3013)
Viewer2007 @ 12/16/2012, 11:57*
Here is another documentary fact that Ruth itself does not interfere with the updates.

Naturally, you have repeatedly spoken about it and there are other confirmations of updates with root. The root itself can not affect the update, because what root is two SU binaries, one lies in the BIN Other folder in Xbin. But the recovery in the update plays a role, but only in the update by air, since this update is installed through the recovery and if there are no stock recovery, then there will be no installation, it has been manifested on the OTA-RANGE, but Kisa on the fact of custom recovery attention Does not draw, as the installation goes through the download and therefore Kisa puts the update and with custom recovery. Just if there are problems with the update through KISU, these are problems with the most sour, as with a buggy program by definition. The basic condition for obtaining official updates is the state of the phone that can be seen in the settings about the device-state-state device. This condition of the device should be definitely "usual" or as on new firmware "Official.", If it is "changed" or as on the new firmware "Spec." Then the update through the vouchers and air can not be speech. How to bring this condition into a normal bunch of information and in (FAQ (MINI-F.A.Q.)) And in (useful links).
Picture


Post has been editedVetal`M - 08.05.17, 13:59
Reason for editing: In the header



Rep: (3013)
Gen1Y @ 12/16/2012, 12:21*
Can someone post the Samsung keyboard with 4.1.1?

Of course, it is possible, but no confidence that it will work. In 4.1.2, the algorithm for connecting the input languages ​​is changed. Save your just in case.Attached fileSamsungime.rar.(3.25 MB)



Rep: (3013)
Zedt @ 12/16/2012, 14:48*
In general, there is a section of the recovery in memory, it is about as a section on a laptop with a backup system in case of recovery, right?
When we roll the new firmware version, it rises on the old system over, all data and settings are saved. And the recovery section is also updated already on the new version?
When you do a complete wipe, the system is rubbed along with the data, and from this recovery is restored by a clean factory version of the system, right?
Or is it not replaced by recovery? After all, there are no little messages that and weep people do not help and advise flashing three file firmware. Or simply from the recovery section, not everything is restored, CSC there or modem is not restored, glitches appear and therefore it is necessary to drastically.
I am interested to figure it out. Hope for understanding

Yes, the porridge in your head was brewing unlawful.
1. The recovery section is just a section without any backups, such as DOS function with some set of operations. And in the drain of the recovery, there is no possibility of creating backup copies of the system, as well as restoration, that is, something does not happen. The ability to make backup copies of the system and user data is only in custom recovery, they also have the ability to restore from backups. Another recovery function is the ability to connect the phone to the computer via the ADB gateway, for the possibility of troubleshooting in system sections.
2. Practically, the recovery was not amented to change from the first SGS3 output times and for each phone model it is in principle, although it is very similar to functionality. Custom recovery have changes and, accordingly, they have versions names. Functionality about all custom recovery is the same, only management is different.
3. From the stock recovery as I said nothing before the factory is not restored, since there are no functions of the recovery, there are no functions able to destroy the system in the drain of the recovery you can clear the cache and restore the system settings to factory, deleting user data and settings that are stored in the DATA section The system is not affected and does not rub. It is possible to destroy the system only in custom recovery by formatting sections.
4. The structure and command part of the three-foam firmware makes something that cannot do the stock recovery, that is, cleaning and formatting system partitions, so a three-foile service firmware is recommended for problems with the phone.

Post has been editedvasyadubov - 16.12.12, 16:29



Rep: (453)
Ruth without a computer! (only for Exynos processors)
All actions at your own risk!
http://forum.xda-developers.com/showthread.php?t=2050297

I do not know how it will be further, but now Sost. Normal, Custom meter, too, for nozzles

Important!
If you try to "close the hole" (there is such a function in the program) Camera flies, maybe it will soon deteriorate, I just put the root, the camera works as before
Picture


Post has been editedVetal`M - 08.05.17, 22:08
Reason for editing: In the header



Rep: (54)
GT-I9300 - Germany (Vodafone) -German operator
PDA: i9300xxell5
Modem: I9300Buelk1
CSC: I9300VFgell1
Version: 4.1.2
ChangeList: 672976.
Date: 2012-12-10

Download # 1
Download # 2

Modem specific. If he noticed i9300Bu.ELK1 on non-operator for example i9300XxELKC.

Attached Image

Picture


Post has been editedVetal`M - 08.05.17, 22:09
Reason for editing: We hide the pictures under the spoiler



Rep: (307)
Jevgenijb @ 12/18/2012, 11:35*
GT-I9300 - GERMANY (Vodafone) - German operator
PDA: i9300xxell5
Modem: I9300Buelk1
CSC: I9300VFgell1
Version: 4.1.2
ChangeList: 672976.
Date: 2012-12-10

Torrent file for quick download
Attached fileI9300xxell5_i9300vfgell1_vd2.zip.torrent(17.99 Kb)

Picture


Post has been editedVetal`M - 08.05.17, 22:09
Reason for editing: In the header


Full version    

Help     rules

Now: 12.01.21, 18:43