Detailed instructions for those who have not purchased the device in Russia (but its model in Russia GT-I9300) and want to get a complete analogue of the PCT (except sticker under the battery). 1. Put with Samsung Kies
Samsung website. It is necessary to have appeared on a computer driver.
You can put only
drivers.
2. Run Kies, connect the phone to a computer. Will begin downloading the driver. After they download Kies sees your phone. If Kies found your phone, you can disconnect it from the computer. If you want, you can save the phone before disconnecting any information via Kies (contacts, notes, messages, etc)., Because in the future it is all erased.
3. Switch off the phone, close Kies.
4. Download
odin 3.04. There are other versions, but I have worked with this, so I write about it.
5. Download the desired firmware from hats "firmware directory" or
from here.(Here Russian firmware are marked SER), or
from here. In these two references only ofitsiallnye firmware for different countries,
a hatthere are informal.
In order to sell the phone was like, for example, in Euroset (there is just such a firmware sell as viewed), I would suggest to download I9300XXALE8_I9300OXEALE1_I9300XXLE8_HOME.tar.md5. That is, the firmware contains: Firmware-I9300XXALE8, modem-I9300XXLE8, CSC-I9300OXEALE1. Then fly through the air updates (on the date your phone is updated to version LFB). You can of course and immediately download a version of LFB. But if you do not download the latest (for now LFB), after all operations, phone prompts you to upgrade the air - it will be a kind of proof that everything is done properly and in the future will be updated phone itself. That is, as the standard PCT phone.
6. Turn off the phone.
7. Press the Home key, key, volume down, power key. Loading firmware download mode. Push-button volume up to continue. All are now in the phone firmware download standby mode.
8. Run the downloaded previously Odin 3.04, jackdaws, no do not touch (the default stand AutoReboot, F.Reset Time), in the PDA field to embed your flash file, for example I9300XXALE8_I9300OXEALE1_I9300XXLE8_HOME.tar.md5 (File SS_DL.dll, which is also stored in the archive firmware is not needed, it will not have to put)
9. Connect your phone to a computer.
Stop and check everything: At the moment you closed on your computer Kies, Odin Odin is opened, the phone in Download mode (with the robot picture), the phone is connected to the computer and on the computer loading the driver again. After you download the drivers in the Odin-e appeared at the top of the left blue box, from which it is clear that the phone is connected. ": [COM12] 0" (the number after COM can be different) type of inscription there appears. So everything is ready.
10. Push in the Odin-e Start.
11. Waiting for about 4 minutes.
12. When the process is complete, in Odin-e Pass appears. Turning off the phone from the computer.
13. The phone will reboot in normal mode, but the old stuff from the old firmware was, glitches began possible. Turn off the phone.
14. Push-button Volume up, Home, power key.
15. In the pop-service menu and perform Wipe cashe Wipe data / factory settings. then volume control keys (up and down), and the choice of the power key. These actions remove the old stuff from last firmware. Deleted everything. That is, all data on the internal flash drive 16 gigs, all the settings and so on. Remains bare new (which you set) firmware (as when you bought your phone).
As for deleting data from the external USB drive not know. I spent the procedure without it.
16. Select Reboot or Restart (do not remember exactly what it says, well, in general reset).
17. The phone rebooted and turned on will prompt you to choose Jazak, time and etc. (Ie, how pripervom inclusion)
All you clean like flashing the store.
18. Check the code
*#272* (Your code IMEI)
# What code is necessary. If the SER, it means the device has become an analogue of the PCT if the SER is not, select it and click Install (although likely to be SER). If it is not listed, you need to be sewn 3 file LEF.
If the firmware file iOS 3 steps are the same, only:
p. 5. You can download it only
here. To what version it is upgraded in the future I do not know, but in my opinion only to LF5.
p. 8. In the PDA insert CODE, inserted in the Phone Modem, insert the CSC in the CSC.
p. 13. Trash will not be old. The remaining items do not necessarily.
The second part of.Ruth (Root). After this operation, the phone ceases to be as the drain of the box. Stock + Root obtained.
Firmware over the air also will continue to fly, but Ruth would disappear after the update. Or rather do not disappear completely, but will stop working. Repeat rutovaniem solved, or you want to save the program Root Voodoo OTA RootKeeper from Market, then after the upgrade, restore it.
There are several ways to do Ruth and here in the forum they are described. I will describe the easiest. Why?
Because all distortions with Rutovaniem here connected with the so-called custom counter (improvised, informal) firmware. This counter "ticking" when stitched informal or on the phone did Ruth.
In this phone, there are two places from which you can learn that the phone pierced something foreign (unofficial).
1. Condition: Settings On-device-status, device status. If it says "Edit" mean something Sharuda.
2. Counter: In standby mode to boot EEPROM (see claim 7) at the top of the last 3 lines. On a blank should be "No", "Official", "Official".
These parameters only affect the service centers. They look if Sharuda, remove the phone with a warranty.
With these counters the controversial question of all - it is necessary to reset, it is not necessary. Ruth noticed at zero counter, no. Everyone has their own opinion.
But we have the phone PCT, respectively, is no guarantee we have here, and do not care about these counters, respectively.
In this case, procedure is quite simple.
1.-4. carry out the instructions of the firmware at the top. (If you are already on it pierced, then execute them is not necessary)
5. Download
Root. The cap has a different version, I did
this. She is the last (to date).
6.-7. Repeat the instructions from above.
8. Start the Odin 3.04, jackdaws, no do not touch (the default stand AutoReboot, F.Reset Time), in the PDA field to embed your root file, such as CF-Root-SGS3-v6.4.tar (note file is zip, Do not forget to unpack after downloading).
9.-10. Repeat the instructions from above.
11. Waiting for less than a minute.
12. Repeat the instructions from above.
13. The phone will reboot. Ruth made.
To manage Ruth SuperSU rights is an application that you came.
Remember: This guide touches on Rutovaniyu counters. This warranty is important, maybe this guide will not work, although someone said that before contacting a service center these counters is always possible to reset the program + + flashing the official full wipe.Post has been editedVetal`M - 08.05.17, 13:40Reason for editing: 1 from apaxuc ...