Digma iDx9 - Firmware | Digma iDx9, iDx9 3G
Android_SDK.exe
User_Manual.pdfM
The curator of the topic is appointedburovikk26.
Digma IDX9 with 512 MB Ram 3G set yesterday firmware firmware Jelly Bean V4.1 modified by a friend Kadabra10 for my tablet, the firmware is heavy for 512 MB RAM brakes strong, the battery shows all the time 1% but it works as before, 3G does not work, Official firmware works quickly, although also with brakes.
I put Jelly Bean v4.1 (512 without 3G), it's a pretty hour-firmware, but..tamosis is actually present, although not critical. WiFi, Market, SuperSu-work. Battery shows correctly after rebooting, after that the level is in place until the next reboot. The "Settings" button does not work yet. Custom. Cadabra10, do not judge strictly for criticism-criticism always easier than doing something. In any case + for the work done.
Installed for 1GB RAM simplyfliesBy equalization with standard firmware !!)) Thanks Kadabra10)): yes2:
GetRootRights throughClockWorkMod Recovery
Installation Procedure:
1 . Swing and install CWM of IT fasting
2 . Download archive
CWM-SuperSU-v1.04.zip (814.86 KB)
3 . We throw the downloaded archive ( Without unpacking! ) On an external memory card, or on internal memory, if you do not have an external card.
4 . We enter the menu Recovery (On the disconnected tablet clamp "Volume +" , "Treats" and "Power" And do not let go to the entrance to the menu)
5 . Select item in the menu "install zip from sdcard"
6 . Further "choose zip from sdcard"
7 . find file "CWM-SUPERSU-V1.04.Zip"
8 . Then "YES - ISTALL CWM-SUPERSU-V1.04.ZIP"
9 . Waiting for the successful completion of the installation
10 . Choose "+++++ Go Back +++++"
11 . We press "reboot system now"
2 . Download archive
CWM-SuperSU-v1.04.zip (814.86 KB) 3 . We throw the downloaded archive ( Without unpacking! ) On an external memory card, or on internal memory, if you do not have an external card.
4 . We enter the menu Recovery (On the disconnected tablet clamp "Volume +" , "Treats" and "Power" And do not let go to the entrance to the menu)
5 . Select item in the menu "install zip from sdcard"
6 . Further "choose zip from sdcard"
7 . find file "CWM-SUPERSU-V1.04.Zip"
8 . Then "YES - ISTALL CWM-SUPERSU-V1.04.ZIP"
9 . Waiting for the successful completion of the installation
10 . Choose "+++++ Go Back +++++"
11 . We press "reboot system now"
Congratulations! Your tablet has a full root! Huge thanks to our curatorburovikk26
Post has been editedkadabra10 - 12.05.13, 00:32
FirmwareJelly bean1.2 from OMA forDigma iDx9 / IDX9 3G.
Higher thanks to wonderful peopleKadabra10 and Lovcii. For assistance rendered when refining and testing the firmware! : thank_you:
Features:
-Eversion android 4.1.1
- Full root
-1.5GB under the apps
- Full root
-1.5GB under the apps
Installation
1 . Download the firmware http://yadi.sk/d/wtir8d8j4qdnu.
2 . Download native kernel
for512ramkernel.img (7.16 MB)
for512RAM with 3G.kernel.img (7.14 MB)
for1 Gb RAMkernel.img (7.11 MB)
for1 GB RAM with 3Gkernel.img (7.17 MB)
3 . Download the fix:
Oma_jb_v1.1_format_nand.zip.(792.51 KB)
Oma_intsd_to_nand_fix.zip.(230.05 KB)
Oma_jb_v1.2_modell_fix_digma 9.zip.(242.58 KB)
Oma_jb_v1.2_akkufix_2.zip.(1.08 MB)
Oma_jb_v1.2_wi-fi_fix.zip.(229,17 KB)
kadabra10_mass_storage_fix.zip.(269.25 KB)
kadabra10_3g_fix.zip.(1.06 MB)
We throw downloaded archives with fixes in the root of an external memory card.
4 . Go to our unpacked firmware and change the kernel in Rockdev / Image. on downloadedNative from Digma.
5 . Run RKAndroidTool.exe (onwin 7andwin 8you need to run the program on behalf of the Admin )
5.1 . On the tablet off, click "Reset" And connect the tablet to the computer. RKandroidTool should appear "Found RKandroid Rock USB" . If it does not appear, install drivers for the tablet.
6 . After everything decided, click EraseIDB . We are waiting for, then click "OK" .
7 . Put a tick on the contrary Loader and click "Run" .
8 . We are waiting until the firmware is established and boot into the recovery.
9 . From the recovery first install OMA JB V1.1 Format Nand , then all other fixes in turn.
9.1 . Navigating the menu buttons rekaveri "Vol -" , "VOL +" . Select button "Power"
9.1.1 . To install fixes in the recovery, choose: install zip from sdcard -- choose zip from external sdcard -- OMA JB V1.1 Format Nand -- YES - Install OMA JB V1.1 Format Nand.zip - Waiting for the completion of the installation of the Fix - +++ Go Back +++ . Further by the same way to put the remaining fixes.
10 . Do "Reboot system"
2 . Download native kernel
for512ram
kernel.img (7.16 MB) for512RAM with 3G.
kernel.img (7.14 MB) for1 Gb RAM
kernel.img (7.11 MB) for1 GB RAM with 3G
kernel.img (7.17 MB) 3 . Download the fix:
Oma_jb_v1.1_format_nand.zip.(792.51 KB)Oma_intsd_to_nand_fix.zip.(230.05 KB)Oma_jb_v1.2_modell_fix_digma 9.zip.(242.58 KB)Oma_jb_v1.2_akkufix_2.zip.(1.08 MB)Oma_jb_v1.2_wi-fi_fix.zip.(229,17 KB)kadabra10_mass_storage_fix.zip.(269.25 KB)kadabra10_3g_fix.zip.(1.06 MB)We throw downloaded archives with fixes in the root of an external memory card.
4 . Go to our unpacked firmware and change the kernel in Rockdev / Image. on downloadedNative from Digma.
5 . Run RKAndroidTool.exe (onwin 7andwin 8you need to run the program on behalf of the Admin )
5.1 . On the tablet off, click "Reset" And connect the tablet to the computer. RKandroidTool should appear "Found RKandroid Rock USB" . If it does not appear, install drivers for the tablet.
6 . After everything decided, click EraseIDB . We are waiting for, then click "OK" .
7 . Put a tick on the contrary Loader and click "Run" .
8 . We are waiting until the firmware is established and boot into the recovery.
9 . From the recovery first install OMA JB V1.1 Format Nand , then all other fixes in turn.
9.1 . Navigating the menu buttons rekaveri "Vol -" , "VOL +" . Select button "Power"
9.1.1 . To install fixes in the recovery, choose: install zip from sdcard -- choose zip from external sdcard -- OMA JB V1.1 Format Nand -- YES - Install OMA JB V1.1 Format Nand.zip - Waiting for the completion of the installation of the Fix - +++ Go Back +++ . Further by the same way to put the remaining fixes.
10 . Do "Reboot system"
Screenshots
 |
 |
 |
 |
Note!
-Telandic CWM does not work. If you want to get a fully working CWM, read the last spoiler.
-Bluetooth does not work because the kernel is set native from Digma
-Bluetooth does not work because the kernel is set native from Digma
WorkingCWMAdapted for Jelly Bean
1. Download the archive
for512ramExt4_512Mb.zip. (5.44 MB)
for1 Gb RAMext4_1gb.zip. (5.45 MB)
2. Unpack the archive on your computer
3. RunRk29update.
4. On the tablet, press the button"Reset" and not releasing connect the tablet to the computer
5. Clickupdate .
for512ram
Ext4_512Mb.zip. (5.44 MB) for1 Gb RAM
ext4_1gb.zip. (5.45 MB) 2. Unpack the archive on your computer
3. RunRk29update.
4. On the tablet, press the button"Reset" and not releasing connect the tablet to the computer
5. Clickupdate .
WorkingTWRPAdapted for Jelly Bean
ATTENTION! On tablets 512 RAM with 3G problems. Your check is required!
Leave your feedback about the firmware! : thank_you:
Post has been editedburovikk26 - 14.08.13, 23:19
Reason for editing: Added fixes for tablets with 3G
Hello
UpdatedRK30XX Tools. Tool - Supports RK30XX and RK31XX
Dops, optimization, etc., all in post
WINDOW N90 DUAL CORE 2 - Flash - Official firmware (OS) (Post # 21484197)
Your firmware disassembles and collects. I can not say about the update program.
Post has been editedSergioPoverony - 20.05.13, 06:39
UpdatedRK30XX Tools. Tool - Supports RK30XX and RK31XX
Dops, optimization, etc., all in post
WINDOW N90 DUAL CORE 2 - Flash - Official firmware (OS) (Post # 21484197)
Your firmware disassembles and collects. I can not say about the update program.
Post has been editedSergioPoverony - 20.05.13, 06:39
About the new Ohm firmware. Sound Digma 512ram without 3G. I use a week. After all the improvements it turned out to be a very worthy rum. Everything works enough quickly. Fixes work. Wi-Fi, Ruth, Market Everything works. Free memory 110MB, result in Antutu-Benchmark - 2881. Here are screenshots:
From bugs: When you connect the tablet via USB, it does not show its memory yet. But this is not critical.
Tested all the available firmware in our header, on working capacity - Ohm in the leaders. I stay on it.
Post has been editedburovikk26 - 20.05.13, 17:32
 |
 |
From bugs: When you connect the tablet via USB, it does not show its memory yet. But this is not critical.
Tested all the available firmware in our header, on working capacity - Ohm in the leaders. I stay on it.
Post has been editedburovikk26 - 20.05.13, 17:32
Reason for editing: removed screenshots under spoiler
TWRP v2.5.0.2 forJelly bean1.2 from Oma.
(Team Win Recovery Project)
Great thankskadabra10 For porting TWRP: thank_you:
ATTENTION!
This recovery is intended ONLY for firmware Jelly Bean V1.2 from OMA
brief information
TWRP (Team Win Recovery Project) is essentially not just a new recovery, but a real platform that will create beautiful recovery not only to developers of third-party firmware, but also operators or manufacturers of smartphones. It is counted for the last team Teamwin and is going to monetize their considerable work. So what is so distinguished by TRWP from existing tools?
First, it is worth noting that the touch screen works in TWP, that is, the menu navigation is performed not thanks to the physical keys of the device, but the virtual buttons in the menu. Accordingly, the TRWP interface itself is written in view of what it will be used in this way. But that's not all! TRWP is completely custom, that is, the developer of each specific recovery can change the image on the keys, change their location or add some new items.
As you can see, TWRP is clearly aimed at doing work with Recovery simple and understandable for normal user.
First, it is worth noting that the touch screen works in TWP, that is, the menu navigation is performed not thanks to the physical keys of the device, but the virtual buttons in the menu. Accordingly, the TRWP interface itself is written in view of what it will be used in this way. But that's not all! TRWP is completely custom, that is, the developer of each specific recovery can change the image on the keys, change their location or add some new items.
As you can see, TWRP is clearly aimed at doing work with Recovery simple and understandable for normal user.
Installation
1. Download the archive
for512ramTWRP_512MB_EXT4.zip. (6 MB)
for1 Gb RAMTWRP_1GB_EXT4.Zip. (6.01 MB)
2. Unpack the archive on your computer
3. RunRk29update.
4. On the tablet, press the button"Reset" and not releasing connect the tablet to the computer
5. Clickupdate .
for512ram
TWRP_512MB_EXT4.zip. (6 MB) for1 Gb RAM
TWRP_1GB_EXT4.Zip. (6.01 MB) 2. Unpack the archive on your computer
3. RunRk29update.
4. On the tablet, press the button"Reset" and not releasing connect the tablet to the computer
5. Clickupdate .
Screenshots
 |
 |
 |
 |
 |
 |
Digma IDX9 - Firmware (post # 21315333)
Added for 512, for stock firmware with EXT3
updated firmwareDigma IDX9 - Firmware (post # 21748691)
Corrected battery work
hurried the battery works, but the device is turned on only when the memory is connected
Khm, it seems to correct: happy:
Corrected connection to PC
Corrected 3G work
Post has been editedkadabra10 - 04.08.13, 22:06
Added for 512, for stock firmware with EXT3
updated firmwareDigma IDX9 - Firmware (post # 21748691)
Corrected battery work
Khm, it seems to correct: happy:
 |
 |
 |
Corrected connection to PC
Corrected 3G work
Post has been editedkadabra10 - 04.08.13, 22:06
Kadabra10, Burovikk26, Thank you so much, I put Jelly Bean on Digma 9 (512MB RAM). At first, I highlighted the Wi-Fi, but then everything was configured. Everything works clearly, without Luggov and brakes.
Post has been editedgulyuk - 10.07.13, 21:50
 |
 |
Post has been editedgulyuk - 10.07.13, 21:50
After the firmware Jelly Bean 1.2 from OMA hangs tightly when trying to turn on Wi-Fi. I did everything according to the instructions (the point about Wi-Fi inclusive). what could be the problem?
nikuone
You did not replace the Firmware folder. check yourself, the easiest way to recalculate files in folders, and then compare
Perhaps you can not replace it. Then pre-delete the old folder, and then copy the new
Post has been editedburovikk26 - 01.08.13, 01:10
You did not replace the Firmware folder. check yourself, the easiest way to recalculate files in folders, and then compare
Perhaps you can not replace it. Then pre-delete the old folder, and then copy the new
Post has been editedburovikk26 - 01.08.13, 01:10
Reason for editing: Added to the instruction on the firmware
Digma without a 3g module, version for now Ohm 1.2.
Thank you so much for the advice. Removed the folder and inserted it from the archive instead and everything worked.
Thank you so much for the advice. Removed the folder and inserted it from the archive instead and everything worked.
FirmwareJelly bean4.1.1 forDigma iDx9
Download firmware for tabletsDigma iDx9
For Digma IDX9 512MB RAMhttp://yadi.sk/d/xdgugtu17nkm8.Number of downloads:119
For Digma IDX9 1GB RAMhttp://yadi.sk/d/dlznpx577nkpmNumber of downloads:44
For Digma IDX9 1GB RAMhttp://yadi.sk/d/dlznpx577nkpmNumber of downloads:44
Download firmware for tabletsDigma IDX9 C 3G
For Digma IDX9 with 3G 1GB RAMhttp://yadi.sk/d/bahuumom7wrpm.Number of downloads: 100
Features:
-Eversion android 4.1.1
- Full root
- 1 GB under the application
- Wrinking adapted for our tablet and is based on the firmware from the XTeam command
- Full root
- 1 GB under the application
- Wrinking adapted for our tablet and is based on the firmware from the XTeam command
Installation
1 . Go to our unpacked firmware
2 . Run RK29update.exe (onwin 7andwin 8you need to run the program on behalf of the Admin )
3 . On the tablet, press the button / toothpick button (in the hole) "Reset" And connect the tablet to the computer. RKandroidTool should appear "Device RKandroid Detected" . If it does not appear, install drivers for the tablet.
4 . After everything decided, click Format . We are waiting for, then click "OK" .
5 . Put a tick on the contrary Loader and click "Update" .
6 . We are waiting until the firmware is established and boot into the recovery.
7 . In recovery performed wipe data / factory reset and wipe cache partition
8 . Navigating the menu buttons rekaveri "Vol -" , "VOL +" . Select button "Power"
9 . Do "Reboot system"
10 . When the first load goes into the settings, in the section "Memory" . We see that the internal memory is not available. Click "Paste an SD card" . Below will appear a message that the map is damaged. We click on this message and format the internal memory, after which it will become available.
2 . Run RK29update.exe (onwin 7andwin 8you need to run the program on behalf of the Admin )
3 . On the tablet, press the button / toothpick button (in the hole) "Reset" And connect the tablet to the computer. RKandroidTool should appear "Device RKandroid Detected" . If it does not appear, install drivers for the tablet.
4 . After everything decided, click Format . We are waiting for, then click "OK" .
5 . Put a tick on the contrary Loader and click "Update" .
6 . We are waiting until the firmware is established and boot into the recovery.
7 . In recovery performed wipe data / factory reset and wipe cache partition
8 . Navigating the menu buttons rekaveri "Vol -" , "VOL +" . Select button "Power"
9 . Do "Reboot system"
10 . When the first load goes into the settings, in the section "Memory" . We see that the internal memory is not available. Click "Paste an SD card" . Below will appear a message that the map is damaged. We click on this message and format the internal memory, after which it will become available.
Fix fixing the incorrect mounting of memory cards when connected to a PC
Download fixkadabra_mass_storage_fix.zip.(269.25 KB)
and original to roll backOriginal_mass_storage1_fix.zip.(269.19 KB)
1. Thump downloaded archive to the root of an external memory card
2. To install fixes in the recovery, choose:install zip from sdcard -- choose zip from external sdcard -- kadabra_mass_storage_fix -- Yes --Kadabra_mass_storage_fix.zip. - Waiting for the completion of the installation of the Fix - +++ Go Back +++ .
3. We do"Reboot system"
kadabra_mass_storage_fix.zip.(269.25 KB)and original to roll back
Original_mass_storage1_fix.zip.(269.19 KB)1. Thump downloaded archive to the root of an external memory card
2. To install fixes in the recovery, choose:install zip from sdcard -- choose zip from external sdcard -- kadabra_mass_storage_fix -- Yes --Kadabra_mass_storage_fix.zip. - Waiting for the completion of the installation of the Fix - +++ Go Back +++ .
3. We do"Reboot system"
Screenshot
 |
 |
 |
 |
CWM
CWM can be download from hereDigma IDX9 - Firmware (post # 21122883)
All work on the assembly of firmware in a bunch produced burovikk26 : thank_you:
Post has been editedburovikk26 - 15.02.14, 08:56
Reason for editing: Added firmware download meter
CWM EXT3 for Digma 1GBrecovery_rktool.zip.(5.51 MB)
recovery_rktool.zip.(5.51 MB)changes
Version 6.0.3.4
From visual changes, added items:
Power Off, Reboot Recovery, Added Root ... Perhaps something else;)
From visual changes, added items:
Power Off, Reboot Recovery, Added Root ... Perhaps something else;)
Alexsey_vlasichev @ 07/30/2013, 13:40
How to determine which device 512MB or 1GIG, did not find anything in the settings?
Attention - it is necessary to determine the audit of the tablet.
Audit 1 - tablets originally supplied with Android 2.3 (512MB RAM)
Date of production to 1204, serial number to DIDX9BK8XH1204XXXXX.
Revision 2 - tablets originally supplied with Android 4.0 (1GB RAM)
Date of production after 1205, DIDX9BK8X211205xxxx serial number and older.
Information took the information from the office. Site.
Post has been editedburovikk26 - 01.08.13, 01:07
Reason for editing: Added information to the header
Added versions of firmware for tablets with 3G.
Digma IDX9 - Firmware (post # 23813136)
Added Fix fixing incorrect installation of memory cards when connected to a PC
Post has been editedburovikk26 - 04.08.13, 00:04
Digma IDX9 - Firmware (post # 23813136)
Added Fix fixing incorrect installation of memory cards when connected to a PC
Post has been editedburovikk26 - 04.08.13, 00:04
Reason for editing: Added ..
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement