Rostelecom doesn’t care, but for security reasons I have changed the ports)

Yesterday I did it on a new tablet. And the point is to block the bootloader, if the Chinese somehow unofficially unlock it, is there anyway no protection whatsoever? And purely for the sake of interest, but through a test point to flash, don't you really need a special xiaomi service account that no one else has right now? If you update the air xiaomi.eu, then he himself will not be blocked?

Record quickly came tablet from HongKongGoldway. Ordered on 25.03 and picked up at the post office 3.04 in the Lipetsk region. Total 9 days from China. Even with Moscow, parcels usually go longer: happy: The tablet came with an already unlocked bootloader and Vietnamese, which made it possible to quickly roll TWRP and localized firmware from Xiaomi.eu
https: //www.aliexpress....311.0.0.28c333edxcjZTd

A bootable USB flash drive that boots directly from this flash drive (without installation), by booting from it and measuring the speed on the speedtest site you exclude all software shoals of the PC. In general, my friend had a case similar to you. What they just didn’t try, and on the computer the speed jumped 3-9 Megabits, and the result was the half-dead network card at the meringue, but since you have several computers on it ... You can speed the PC on the speed test site and attach a screenshot ... This is the speed from the site to your PC, not the terminal ... In the torrent, the download speed in megabytes, not megabytes, is shown. You do not confuse units of measurement?

We bought a note 7 to my wife yesterday, the camera is an order of magnitude higher compared to note 4x, especially macro and in poor light conditions

4 instead of 8 is 100 megabits, which is enough for a tariff of 30 with a margin

xXD0OmGuYXx , then follow the pattern, enter the necessary ports, type udp and ip address of the PC

xXD0OmGuYXx,



where does the modem? Or do you mean a usb wi-fi adapter for pc that connects to the RV6699? If so, then ports are forwarded to

Customization>Network Address Translation (NAT)>Port Forwarding



In this example, when you call your white IP address RV6699 or a domain name (if you use ddns) from outside to port 90, you will be redirected to port 80 to IP 192.168.0.18 within your home network

Posted 03/25/2019 4:55 PM:

And what ports do you want to forward on the PC? Maybe they are already open on Sercomm, and on the PC they are blocked by a firewall?

all 4 under the Internet, but I have Rostelecom and the tariff without IPTV at all

Not very long, but for a month on this ONT with no-ip no problems were found. Literally immediately after downloading, ONT is already available by domain name, despite the changed ip address

* mvp *,

There are no problems with setting up ddns, Rostelecom Lipetsk region. As for Wi-Fi, I think you should use a separate access point with normal antennas, you can’t achieve a good signal in distant rooms through several walls from this device.

Posted on 03/22/2019, 15:07:



They don’t even turn it off there. They don’t give the friend a password from the usual uchetka so that they can change the password and ssid themselves ... And they also say that if you reset it to the default settings, then you can’t configure the Internet without paying a specialist

Wi-Fi is fast but weak. For an apartment with a couple of rooms and unoccupied channels, it can and will be fine, but here, parents in a small private house, standing in the attic on the 1st floor, barely finishes at all, although the Keenetic 4G standing next to it quietly covers the entire square with Wi-Fi. I left it on Sercomm 5 GHz for fast wi-fi (300 Megabit squeezes out on the phone not far from Sercom), and I use Keenetic 4G as an access point for 2.4 for remote rooms.

With ddns, everything is fine, but the inconvenience of the no-ip service is that you need to go to their website once a month and confirm the activity of your account, otherwise the domain will be disabled. But of the free it is probably the best option.

Post has been editedvladi5700 - 21.03.19, 13:13

Do not tell me how much RAM is usually occupied with an average network operation? My percent is always almost not loaded, but a lot of RAM is busy

CPU 1.75%
Memory Usage 75.33%

Maybe what kind of bolts they are attacking to me too) IP is white dynamic, I use DDNS, I tried to change the address by rebooting the terminal.

Post has been editedvladi5700 - 18.03.19, 16:49

Tpyn4uk , if it's not a secret for Rostelecom, can you configure the terminal yourself after resetting it to the factory settings? Otherwise, the installer changed the admin password of the friend, and TP Rostelecom claims that it could not be set up by itself after resetting the settings. Is there something besides ppoe login and password that you need to register?

Hello. I faced this miracle terminal from Rostelecom. Judging by information from installers and from the Internet, the provider should have remote access to the terminal (which is unpleasant, but not critical), but the installer told that once a month or two all settings, including wi-fi (access point name, password), will be thrown off on default when updating line parameters ... Is that really so? Can anyone share the operating experience of this terminal with Rostelecom?

Post has been editedvladi5700 - 11.03.19, 09:47

Yes, I saw your post when I studied the topic, it is a pity it is not a "table" performance. For myself, I kind of chose Vstarcam c7824wip

Hello! I have not followed the IP camera market for a long time, but now I decided to update my home IP camera and I can’t figure it out ... I looked at inexpensive models with a kind of acceptable picture Hiseeu FH1C and Hiseeu FH2A. But reading the reviews, I learned that they (as in most modern low-cost cameras) do not have a web interface at all and can configure it autonomously on a local network without an Internet connection ... Can they just send a rstp video stream, for example, without any clouds and applications? Or will another year pass, the cloud closes and the camera can be in the trash? Can someone tell me a good camera for my requests?

- price up to 4000r
- normal picture 720 \ 1080
-the ability to connect via LAN cable
-the ability to work offline \ settings in a local home network without clouds (for remote access there is a white static ip address and a domain associated with it)
-the ability to disable the "night" mode

fedorgavrilove , and I have applications on duty to open and the 60fps video was lagging from YouTube .... So I think it is worthwhile to flash or still memory of PPC and only finish it. The coolest device, I have been using it since 2013. No Android device for so long was relevant.

FaXiR , Hooray! GCamera_4.1.006x64 earned!