Rep: (223)
* AlarmZone13 , and you have it that is not tracked?
Attached Image



Rep: (223)
* Evgeny_561 Yes, the reboot helps, but not for long, the choice of the stock tune did not remove the problem for me. Personally, I was helped by a flashing from the drain to the drain, but this did not help someone. So if there was a specific solution, or someone would confirm that the flashing helped him, then the cap could have been.

Post has been editedvasia1371 - 17.07.19, 12:45



Rep: (223)
* ximikmax , Maybe the crooked firmware has sat down, since it is eating like this. And so for gps you can try any custom.



Rep: (223)
* Alex_70rus, accidentally the patch did not come across, so that the battery in numbers was?



Rep: (223)
* Payk86 Wonderful, does not want to go through the playmarket either? And if you install the firmware in another way, in the header - the installation of custom firmware. Something gets askew, or firmware, or gapps.



Rep: (223)
* Payk86 If it is not difficult, describe how you install Google services, where you take them and which ones. And maybe the collective mind can tell you something. At least on one firmware they run? After installing 9 there were only troubles with certification of the device in Google. Such a problem like you did not come across.



Rep: (223)
Payk86 @ 07/08/19 13:45*
just the login / password input window does not appear
I hope you install gapps?



Rep: (223)
Tell me please. Need a program to display the statusbar at the bottom of the screen. Phone with a bang, at the top fits a minimum of icons. Preferably without Xposed.

Post has been editedvasia1371 - 07.07.19, 22:33



Rep: (223)
andi555777 @ 07/03/19, 19:09*
Also, the root is needed
if you want more, then install the root, as written in the header. For MTC, the other will not work. Regarding the sound, I would try to tweak in the engineering menu, something like it says here -
Open the engineering menu (code * # * # 9646633 # * # *). Next, select the following menu items:

1. “Hardware testing”

2. “Audio”

3. “Volume”

4. “Voice” - Speaker

Raise in "NB" and "WB"
"Reciever" - the value of "UL Gain" - 164 (maximum), although they write that you can set 252, but I did not.
We see the indexes, this is the gradation of sound adjustment.
In the 6th index, we set 160 (this is the maximum, no longer gives), but probably, if you set the value of "UL Gain" 252, it will give more.
In your case, you would set everything to 160, but if you want to lower the volume with the buttons, the volume will not decrease.
At the bottom of the screen, press the “Set” button and reboot.


Post has been editedvasia1371 - 05.07.19, 12:14
Reason for editing: Corrected under our engineering menu.



Rep: (223)
* Alexpol86 I apologize, I made a mistake. Here is the * # * # 9646633 # * # *



Rep: (223)
Won in free case for iPhone. The case itself is for free, but the delivery costs almost the price of the case. I didn’t take it, and I don’t have an iPhone, I poked at the goods for nothing.) Now I’m poking more thoughtfully, but I’m not lucky anymore)

Post has been editedvasia1371 - 04.07.19, 19:08



Rep: (223)
* ximikmax I did not include about three months, but sometimes I recharged it. Turned on, hung on the logo for about 15 minutes, then it still started up. Many people write that after a long inactivity, this device dies.



Rep: (223)
* pan43er , I would probably, with such symptoms, first carefully disassemble the phone, you need to find out the reason why it is not charging. And why the error climbs, I do not know. You can change the port on the computer, some helps. As well as another wire, there is also a problem in it.



Rep: (223)
* andi555777, You can clean it without root. Settings-applications-show all applications-select the desired application-storage-clear cache-erase data-back-stop-disable. I do like this.



Rep: (223)
I am writing about a different way of flashing our phone on Android 9. The method has been tried by the user* klinski and described in this post - Oukitel C12 Pro - Discussion (Post by klinski # 84881745) . I want to add a little. Yes, indeed, the method is working and a bit simpler, even TWRP is not required. Just need to unlock the bootloader as written here - Oukitel C12 Pro - Discussion (Post by vasia1371 # 84211415) , download the stock firmware and replace system.img from the firmware you want to install. If you downloaded the firmware image, where the name is not system.img, then rename it to system.img. Then flush as usual, through the flashlight. TWRP and Root, if necessary, it is better to flash it separately later. TWRP will be needed to flash Google services, since firmware usually goes without them.

Post has been editedvasia1371 - 03.07.19, 13:30



Rep: (223)
* andi555777 , probably. I do not know where their comrades took who uploaded these firmware. I only know that after the flashing the problem was gone.



Rep: (223)
* andi555777 , before I stitched to the stock, the stock and stood))) Maybe they are crookedly poured at the factory.



Rep: (223)
* andi555777 on native stock.



Rep: (223)
* andi555777 , try, can help - Call Volume Up! (Post byostaff # 12877155) It is not only the volume of the call, but also the speaker, as stated, adds. My call disappeared completely, only the flashing helped. The reset did not help.

Post has been editedvasia1371 - 02.07.19, 15:23



Rep: (223)
* Den525 need root Hid Navbar with this program - https: //play.google.co...navigation.bar.remover . For gestures I put this one here - Fluid Navigation (Post onevd # 77095129) . My phone is different, but what's the difference. And first we put gestures, then we hide the navbar, so as not to sit down in the overshoe.)

Post has been editedvasia1371 - 02.07.19, 10:40

Full version

Help     rules

Now: 07.23.19, 16:29