I want to put on your routeropenvrt firmware because need to implement functionality - creating a guest wi-fi and limit her speed, that's found
an articlehow to implement it on openvrt using a script
# / Bin / sh # This is supposed to be run on openwrt # Written by Stanislav German-Evtushenko, 2014 # Based on! [[: Doc: recipes: guest-wlan]] # Configure guest network uci delete network.guest uci set network.guest = interface uci set network.guest.proto = static uci set network.guest.ipaddr = 192.168.101.21 uci set network.guest.netmask = 255.255.255.0 # Configure guest Wi-Fi uci delete wireless.guest uci set wireless .guest = wifi-iface uci set wireless.guest.device = radio0 uci set wireless.guest.mode = ap uci set wireless.guest.network = guest uci set wireless.guest.ssid = openwireless.org uci set wireless.guest. encryption = none # Configure DHCP for guest network uci delete dhcp.guest uci set dhcp.guest = dhcp uci set dhcp.guest.interface = guest uci set dhcp.guest.start = 50 uci set dhcp.guest.limit = 200 uci set dhcp.guest.leasetime = 1h # Configure firewall for guest network ## Configure guest zone uci delete firewall.guest_zone uci set firewall.guest_zone = zone uci set firewall.guest_zone.name = guest uci set firewa ll.guest_zone.network = guest uci set firewall.guest_zone.input = REJECT uci set firewall.guest_zone.forward = REJECT uci set firewall.guest_zone.output = ACCEPT ## Allow Guest ->Internet uci delete firewall.guest_forwarding uci set firewall.guest_forwarding = forwarding uci set firewall.guest_forwarding.src = guest uci set firewall.guest_forwarding.dest = wan ## Allow DNS Guest ->Router uci delete firewall.guest_rule_dns uci set firewall.guest_rule_dns = rule uci set firewall.guest_rule_dns.name = 'Allow DNS Queries' uci set firewall.guest_rule_dns.src = guest uci set firewall.guest_rule_dns.dest_port = 53 uci set firewall.guest_rule_dns. proto = udp uci set firewall.guest_rule_dns.target = ACCEPT ## Allow DHCP Guest ->Router uci delete firewall.guest_rule_dhcp uci set firewall.guest_rule_dhcp = rule uci set firewall.guest_rule_dhcp.name = 'Allow DHCP request' uci set firewall.guest_rule_dhcp.src = guest uci set firewall.guest_rule_dhcp.src_port = 68 uci set firewall.guest_rule_dhcp. dest_port = 67 uci set firewall.guest_rule_dhcp.proto = udp uci set firewall.guest_rule_dhcp.target = ACCEPT uci commit # Configure wshaper (optional) opkg update opkg install wshaper uci set wshaper.settings = wshaper uci set wshaper.settings.network = guest uci set wshaper.settings.downlink = 500 uci set wshaper.settings.uplink = 2000 ## Work around for https://github.com/openwrt/packages/issues/565 (wshaper: settings are not applied on boot) echo - e '#! / bin / sh \ n \ n [ "$ ACTION" = ifup] && /etc/init.d/wshaper enabled && /etc/init.d/wshaper start || exit 0 '>/etc/hotplug.d/iface/10-wshaper uci commit
Apply changes
Enable the new wireless network
/etc/init.d/network restartRestart the firewall
/etc/init.d/firewall restartRestart the DHCP service
/etc/init.d/dnsmasq restartStart traffic shaping
/etc/init.d/wshaper startMake traffic shaping permanent
/etc/init.d/wshaper enable
but because the experience I have of openvrt, the script and the rollback request to the factory, I would like to ask to test, for whom this forest as dirt iotpisatsya - whether everything will be working as stated on the router tp link 741nd. Perhaps someone help me with tosmozhet mestnyhprofi that the "you" with openvrt test this script iproverit performance of this script and the functions and point out which version of the router firmware and tested or who can knows as dd-ART to implement it?
Post has been editedutwer - 25.10.15, 22:20