In general, I will describe everything that happened to me. Why the router was sitting without the Internet, I still do not know. I associate it with the fact that the default poppy in custom firmware was already tied somewhere and I was given the wrong settings.
Therefore!
1) Who has Beeline, we always sew with the WAN cable turned off and change the MAC address (on the router's macro or PC) before connecting to the Internet. After that, you can customize as you please. (upd. 25.02 still the beeline began to see a new pandora, but for some reason it is necessary to open yandex.ru or any other site in internet explorer on win10, there is no redirect to their site with the phrase "everything will work in 10 minutes").
2) If you flash any custom according to the instructions and return from it to the stock with R6220.bin firmware via the link from this topic, then a) you will not be able to update via the Internet and web muzzle, b) I (perhaps everyone, or maybe and no, no statistics) WiFi did not work and the settings window was gray.
___
there is a small snag. telnet in the custom firmware (the port needs 22 by default) does not know about mtd_write, and on the 42nd firmware (which we requested above) you cannot open Debug Enable.
_____
Decision:
1) Download the latest firmware from the offsite from the Internet, unpack it with the archiver and get the same .bin file. Last at the moment I attached to the topic.
2) This firmware is already running
http://192.168.1.1/setup.cgi?todo=debug3) Take FullRom
from here , we throw all .bin-files on the USB flash drive
4) Connect, go to our flash drive
Enter in turn the commands:
mtd_write write mtd0.bin Bootloader
mtd_write write mtd1.bin "SC PID"
mtd_write write mtd2.bin Kernel
mtd_write write mtd4.bin "English UI"
mtd_write write mtd5.bin ML1
mtd_write write mtd6.bin ML2
mtd_write write mtd7.bin ML3
mtd_write write mtd8.bin ML4
mtd_write write mtd9.bin ML5
mtd_write write mtd10.bin Factory
mtd_write write mtd11.bin "SC Private Data"
mtd_write write mtd12.bin POT
mtd_write write mtd13.bin "Traffic Meter"
mtd_write write mtd14.bin DPF
mtd_write write mtd15.bin "SC Nvram"
mtd_write write mtd16.bin "Ralink Nvram"
mtd_write write mtd17.bin "Ralink Reserved"
mtd_write write mtd18.bin ML6
mtd_write write mtd19.bin "Upgrade Flag"
mtd_write write mtd3.bin Rootfs
5) Turn off the router with the button and turn it on.
6) Get the stock 34yu firmware with a working Internet and WiFi.
7) Update via the Internet or web-face to the last.
Attached files
R6220_V1.1.0.68.bin.zip(22.21 MB)
Post has been editedtheAvalanche - 25.02.19, 00:08