In this case, I would do this:
1. Revision of the power supply unit. The output should be DC 5.0V without high-frequency components. Radiation interference on the air and the network leads to a deterioration in the operation of the receiver of the console.
Yes, I didn’t measure the power supply, I'll look in the evening.
2. Move the antenna in the box of the console as far as possible from the processor heat sink. The reasons are the same - high-frequency interference.
The antenna is already outside the case, on it, I also thought because of this, there is no difference.
3. If a rollback to the factory settings does not change the situation, I would find a cable and a PC (what should I do?) And reflash the prefix, and, best of all, the lunar version of the firmware (we will talk about it above). By the way, the average temperature of the processor on this firmware, when watching movies, I dropped to 54-56 degrees from 62, which is good news.
I did not start to flip / reflash yet, many write that with my revision it is a particle, yes, about the lunar version I’m just reading the pages now. As for the temperature, I still sinned on this, so I have a cooler below the console and the temperature does not rise above 45-48 degrees.
Post has been editedsnr93 - 29.07.19, 10:02