Alexeykamensk,
There was already talk about this earlier. The access point does not work on the requirements. I have not tried it myself, because there is no need. But I remember exactly the conversation was about this.

raratext,
Have you been so long? Farther top spreads? Or just the top and everything? What to expect? Is that all or crawling on? Has anyone on the Panda tried to open a dispute on such a problem? Maybe you can knock out the compensation?

Post has been editedsergei99959 - 06.06.19, 12:44

Has anyone started the touchscreen already? My upper region stopped working correctly for some reason. Blind correctly causes. But the programs in which the selection buttons are at the top (such as the EU Explorer) do not work correctly. When trying to press the upper buttons (on the left of the menu or on the right of the cross)

the curtain falls out. Options to press above or below these buttons, either to the left or to the right, do not give anything. It helps only turn the phone sideways. Is anyone aware of the problem and its solutions? What calibration can do? Or do not ride and just the touch is covered already? Phone only a couple of months from delivery.

Post has been editedsergei99959 - 06.06.19, 10:30

Stelss1980
Speaker Boostfor example raises :) or other similar. There are many such prog on the market.

Post has been editedsergei99959 - 05.06.19, 17:44

SmogunovAndrey,
Yes, they just sent correctly. On the MTS, everything is fine with me. The problem is 99 hamster and docking with an operator in a particular location. Something from their equipment tupit with 99 hamster. On the 17th hamster, on my MTS, at first, too, +2 in belt 3 was set. And then it became as it should be 3 put. So they fixed something. I did not do anything with it at all. So this is 100% of the operator, and you still need to prove support for the parrots. They work on the memorized text. As an option to say that I put another sim card and all the rules, but with your sim card cant, and say that they have a problem. And the girl in the phone will drive that problem in the phone. And she replied that - no, they have a problem! Etc. before making an application to specialists for verification. This is, but this is offered very rarely. It is always just culturally sent, they say the problem is with you, and we have nothing to do with it.
Well, it's easier just to synchronize via the Internet with additional software :)

Post has been editedsergei99959 - 31.05.19, 11:14

SmogunovAndrey,
It happened. This is from the operator jamb. I +2 was put at one time, although I live in a +3 belt. Then it became +3 as it should be. If auto-sync is important, sync via the Internetadditional software. Or try an operator to complain :)

Post has been editedsergei99959 - 30.05.19, 10:09

vm7
Damn: (4 days in the speed dial kept numbers, today everything is gone again. Nothing new turned out about this glitch?

DiscussionLeagoo T8s
Leagoo T8s
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedsagitt67 - 24.05.19, 23:05

Has anyone tried RR from 2019-05-12? What's new? Communication is not corrected?


PS


FIG there. It seems to look, the phone did not go on the drain in 2g. Yesterday and today it goes back to 2g: wallbash: despite the fact that * # * # 4636 # * # * in tinctures is LTE \ WCDMA

Post has been editedsergei99959 - 24.05.19, 18:05

Stelss1980
Third-party software. This is long gone. We remembered version 5, in August, it seems like 10 already.

Post has been editedsergei99959 - 24.05.19, 17:46

On the drain in the stock call, numbers started to disappear every day from speed dialing (contacts are in place). Already like day 3 is. I get up in the morning and it's clear there. For the day they are recruited, but in the morning it is again clear. This is the first time I see. And most importantly my friend started the same thing on Ligo. Same day 3 as. What kind of garbage? Goog something namutil in some regular update or something?

Post has been editedsergei99959 - 22.05.19, 19:40

Evgen2507,
Therefore, it is the most relevant - I put it all together. All you need to do. Attached all links to TvRP and magiski, so as not to search manually. After appearedpatch . The most recent link to it. It should just be put after receiving the root.

Yes

Post has been editedsergei99959 - 22.05.19, 11:06

Evgen2507,
In my instructions, this link is called?Patch If you did everything according to my instructions, then you only need to put a patch from that post in order to decipher the date. I say - do not get it. :)

Post has been editedsergei99959 - 22.05.19, 10:59

Evgen2507,
You do not read it means, therefore, do not understand it. Of course, 2 times you do not need to sew TVRP. Each of the instructions is written from the beginning - so to speak from zero, meaning in the hands of a clean drain from the box and includes the TVRP firmware. If you already have a custom TVRP, naturally you will not need to install it again. Skip everything related to this and go on to install the firmware.

then through tvrp flashing vendor

Post has been editedsergei99959 - 22.05.19, 10:55

Evgen2507,
Normal instruction. Read, think, understand. If you do it for the first time, then any instruction will be incomprehensible - you need to ponder and understand. If you do not want to ponder and understand, but you want to quickly - give it to someone who knows, or go to SC.

Ps.
What are you talking about? So this is generally the instruction for obtaining RTH rights, and not for firmware. What is crossed out is not necessary to do now. Links to different posts in order to make it easier to find what you need to put.

I can write more clearly:
1. Sew a custom RVRP
2. Boot into the TVRP without booting into the system.
3. Put the TVRP Magisk.
4. Boot into the system.
5. Install Magisk manager.
6. Put a patch to decrypt the DATA section.

Without links is clearer? All you need to do is look for yourself now.

Post has been editedsergei99959 - 22.05.19, 10:28

t04karus,
try itSoundabout

Post has been editedsergei99959 - 18.05.19, 12:42

I apologize, it may be a stupid question, but I do not use this application myself. And a friend has a problem - when you make a video call, if you hold the tablet vertically, then the person who receives the call has the picture turned to the side. If you rotate horizontally, the receiver falls on its side, and the picture from the tablet of a friend sees exactly. How can I fix this?

Post has been editedsergei99959 - 30.04.19, 12:43

rezidentOS,
And How? How are things at work? Were communication breaks? I still have no time to put the PP and try to disable 2d. On the stock, I did such a chip, the phone stopped moving to 2g. Communication keeps fine. In theory, it should be with the PP. And we have a good coverage. At 4g speed up to 60 in the evening keeps. Why, when making calls to 2g, I don’t know, it’s more likely that the operator is already troubled by what. Maybe type 3g network unloads so.

Post has been editedsergei99959 - 22.04.19, 21:26

Is this a screen with an RR? I have not seen this menu o.O

I and on the penultimate PP sound was like.

Here the connection only breaks on all requirements. And most likely the operator is also involved in this, since some people have no problems with communication. And I personally have!
I tried to overcome this for a long time and noticed the following on the MTS: Always 4G coverage. When you call, the phone automatically switches to 3G. And after 20-30 seconds, it already goes to 2G. It is during the transition from 3G to 2G that the connection is cut off: (On all the requirements, and on the 8 android and on 9. And such transitions from 3G to 2G are not always for some reason. Every 2-3 calls. Understand I don’t have why, apparently it’s already from the operator. Therefore, 1-2 calls on calls go normally, and on 3 calls, I cut down the connection :-(
The main thing is no engineer. It would be possible to try to chop off in general 2G, leaving only 3G and 4G. Logically - could help.

Post has been editedsergei99959 - 13.04.19, 21:00