#1 ,
#2continued ...
an interesting problem got out
if 2 flash_chip 128 (16MV)
roll up the programmer the same way
then from under the Breed Web does not change anything.
In general, one Breed needs to change something,
Well, at least the processor frequency,
otherwise the second flash will go into the bootloader (auto).
Do not solder two flash with "bred clone" with one volume of 128 (16MB).
some downsides (of the original)
Put socket soic8 under the sop8 case,
it eliminates any problems with
DUAL FLASH.
Just give one flash and use Breed Web.
(situation with "bred clone", but not necessary)If you put flash different in volume,
then there are no problems.
No. 1 is larger in volume, and No. 2 is smaller.
All design flaws of the board will be eliminated,
at least hate nexx3020f feels
and does not want to slam the cover)))
- install flash under the WSON8 (32MV) enclosure,
and down will go socket soic8 with flash for SOP8 (8 / 16MB soic).
p.s.
Karoche, WSON8 is not an authority for us ...
They do not have spi over 133MHz and 512Mb (64MB).
I will leave WSON8 support, as Socket Soic8 is bigger.
в—Џ possibly adaptable to Nand Flash
for 1GB and we’ll give a percentage per share! p.p.s.Firmware in DUAL FLASH has been tested.
(LEDE, Gargoyle, Snowdrop, ROOter, etc.).
FLASH: 16MV + 16MV, 16MV + 8MV - Ok!
Post has been editedser.tuner - 04.03.19, 08:51Reason for editing: p.s.