Rep: (101)
* Alex733ru,
Attached Image



Rep: (101)
SilentTwilight @ 03/21/19, 10:52 PM*
. Installing Tvrp from the original (I usually take a post about multilanguage from the header) - the latest versions and without the requirement of the format Dates
TWRP 3.2.3-021 Multilang?
From the site MiRum fit? I just thought that it would be better to install the version that the firmware developer advises.
Attached Image

SilentTwilight @ 03/21/19, 10:52 PM*
If you want to make "beauty", there is an instruction. Straight by points, with the date format, etc.

Bythisinstructions "beauty"?
alex913069 @ 03.21.19, 22:54*
Only in global firmware you need to patch Booth

If MiRum or other firmware is assembled based on the Chinese version, then it is not necessary to honor the boot?

After installing the firmware from MiRum, can I remove the muzhisk if I don’t need a ROOT?

Post has been editedsanata - 21.03.19, 22:40



Rep: (101)
The more I read the forum thread, the more I get confused. I'm waiting for the bootloader to unlock, well, I decided on the choice of firmware I'm going to switch to. I plan to install the firmware from MiRum. There in the instructions (on the site MiRum) there is not a word about patches and Magisk. Explain in what cases they need to be put and why?

Post has been editedsanata - 21.03.19, 21:47



Rep: (101)
Hello. Updated at 10.14, everything works fine except for sleep. If the computer goes to sleep, then when you wake up, the login window does not appear, and the OS boots from scratch, another word is the restart of the PC.
I went to the site Applelife, but I was not the only one with such a problem, but there are alsodecisionit helped me.

sudo pmset autopoweroff 0
sudo pmset powernap 0
sudo pmset standby 0

Post has been editedsanata - 27.09.18, 16:49



Rep: (101)
fantom4ix @ 08/30/18, 02:46*
Badly wound up, it should not be visible in the properties! Get on an empty frame!

Normally wound up, just for display was injected into Clover
Attached Image

Attached Image



Rep: (101)
if neoshibayus I worked only in tandem with vstroykoy

I have, in principle, started
Attached Image

Alas I will not say, I do not remember, it is necessary to google

OK, I'll try to find it. But mostly ran across the r9 280X. Thank!



Rep: (101)
if neoshibayus I worked only in tandem with vstroykoy

If the installation is not heavy, then it did not work?

Post has been editedsanata - 28.08.18, 21:52



Rep: (101)
Hello! Does R9 280 work in macOs? The photo indicates what should, but I would like to hear the opinion, or the advice of professionals. Can anyone come across negative reviews about her work at macOS
Attached Image



Rep: (101)
Temyich1 @ 07.27.2018, 02:39*
* sanata, do you have slashes fakes? Versions 3.5.1?

Yes.



Rep: (101)
Put 10.14 beta 4, it works stably for the beta version. But ...., I decided through the Power Gadget to look at the work of the processor. I noticed that even at idle time it works at high frequencies. (3.2-3.4) sometimes drops to 2.8 for a second, although at 10.13.6 at idle time (1.6-2.2)
Maybe I missed something in the factory of the processor at 10.14, or does the beta version behave this way? Everything is fine with macOS 10.13.
I5 4670K processor

Attached Image


Attached Image


Post has been editedsanata - 26.07.18, 00:24



Rep: (101)
I'm not too lazy, I was looking for and reading, and there are no such errors close to me, I have a lot of information confused

Well, you also answered
Remove all patches in DSDT fix except dtgp and hpet.


how to do it ??? what and where?


Yes, even in the bootloader (GUI Clover)
ANDhereeverything is.
Then edit config.plist
How to do it tooa linkhave given.
All information is in the header.

Post has been editedsanata - 25.05.18, 20:28



Rep: (101)
* gromvit72 and what is now not activated because of the region? If I have an American, then I can not activate it in Russia?



Rep: (101)
Boss76rus @ 09.11.17, 22:34*
through Tuna?

Yes, in DFU mode for example.

IOS 11.1.1 released

Post has been editedsanata - 09.11.17, 21:40



Rep: (101)
Boss76rus @ 09.11.17, 20:14*
Hello. The situation is as follows, I bought an iPhone 6s, I wouldn’t be able to check everything, imei immediately forgot to check, on the testing site the apple says that imei belongs to another device. When buying, it was 10.3.3 I naturally dropped everything, activated everything, and updated to 11.1 and came across this topic ... The question is whether it will become my brick if I decide to reset all the settings, because I want to sell it .. It’s also worth trying.

You can still roll back to 10.3.3, Apple for 6S allows you to do this.

Attached Image


Post has been editedsanata - 09.11.17, 21:31



Rep: (101)
TheAlexS1978 @ 10.30.17, 23:39*
Be sure to need Bluetooth

Yes, I need Bluetooth



Rep: (101)
Maccabi92 @ 10/27/17, 13:59*
Roll back if you download firmware 10, can you?

No, roll back will not work.



Rep: (101)
The 4th beta came out, try, maybe corrected. Surprised update size!
Attached Image


Post has been editedsanata - 20.10.17, 20:18



Rep: (101)
* sashada
Universal Access / Home / Open with finger
Attached Image


Post has been editedsanata - 20.10.17, 19:45



Rep: (101)
Yes, and wanted to spike the market for sales of their devices

How interesting? This will have a detrimental effect on the secondary market, so now you’ll be thinking 20 times whether to take a used iPhone. I think that many people buy a new one, only after they sell their old phone.

Post has been editedsanata - 20.10.17, 18:57



Rep: (101)
Espanolguy @ 10/18/2017, 00:39*
By the way, as another 1 “breath of air”, we can regard the fact that just the other day there was an addition about the 6S and its replaced (non-original) display, so that the iPhone could be tested (activated) with it, therefore, 6S for our own reason, why not do others, but here I can not give an answer))

Posted 10/17/2017 23:40:

Here I dragged it, I hope, I think correctly))
Just like from the movie "Lucy", I feel the intelligence has increased by several levels: D
sarcasm.

Posted on 10/17/2017 23:41 PM:

Waiting for my theory to refute))
And who told you that 6S was not activated? At 6S, the touch screen did not work, it was possible to start it, but before the first reboot or lockout. It was activated normally !!!. The problem with the touch screen Apple eliminated in 11.1 b2, 11.03.

Full version

Help     rules

Now: 07/25/19, 10:12