Rep: (104)
* grayfather , the nature of the damage indicates possible damage to the system board, deformation of the structure as a whole. How did you check the opposite without a display?



Rep: (104)
* Grouli , you were correctly indicated that swimming in them is not recommended, read the IP68 standard first. You will not find a directed stream of water in it, for example, another standard serves for these purposes. This, already discussed here, use the search. You can’t swim in the watch, the manufacturer and the standard do not imply this. Diving is not equal to swimming in water. Understand this at last. I also swam, everything went well. But this is entirely at your own peril and risk.



Rep: (104)
* YaroslavRez , This is not the same thing as requested by the author of the post above. In Mi Mix 2, I have not seen such a function.

Post has been editedplazmatics - 27.08.19, 02:56



Rep: (104)
* sachok , * Waldemar77 , this code does not turn volte on or off. It is designed to disable / enable regional / operator checks before turning on volte. This is due to the fact that not every operator supports the same technology for voice transmission.



Rep: (104)
* victor23el Well, what kind of fairy tales? Perfectly plows for 9+ snap, with the arrival of the ninth bucket brought. Previously, it was decided only with root.



Rep: (104)
* Uni1Del as far as I know it was "always" at the sucker. When the display is on, the charging current drops to 500-700 milliamps. This is a certain protection against overheating and protection of the display, afraid of high temperature. Starting with S6, I personally observed this on S7, S7e, S8, S9 + (snap).

Post has been editedplazmatics - 15.08.19, 15:28



Rep: (104)
* FritzAlex , it arrived with a new version of the 9ki bucket (I have S9 +). Energy saving will not help you, but you try, and then, do not forget to write here for representatives of NM. So that they do not extend this joint for another six months.

Post has been editedplazmatics - 12.08.19, 22:37



Rep: (104)
* vchera_uehal , but how does this end up looking for the user? In any case, we understood each other: ok:



Rep: (104)
* rehcnt , not quite so, before the tracks were repeated and played not by chance, according to observations. Now, quietly twisted something, it became by accident.



Rep: (104)
* makc8585 , I was always struck by people who measure the quality of the network on sticks. Are you sure networks work this way? Why do you think that both phones will hold onto one BS or sector? Do both phones work in aggregation mode? There are a lot of factors at which sticks are drawn on the display. More or less some reliable results can be achieved by reading the readings of the no-monitor, preferably when making a call or actively transmitting data and observing the conditions of frequency aggregation in LTE. In other GSM or UMTS communication standards, however, like gangs, there will be completely different indicators that also need to be tested.

Although, I agree, in your post there are no complaints about the device.

Post has been editedplazmatics - 08.08.19, 00:51



Rep: (104)
* F1118 , because it is not available for our model in the corresponding region, the Galaxy Store to help, registration is needed.



Rep: (104)
* vvevvevve I will not argue, just leave the screen here. What does not suit screenshots from devices is a little not clear. Obviously, there is a desire to get more convincing evidence in the display of the "plus", but for me this is enough. In the topic about S9 + on snap, you can find screenshots of the monitor with the 4G + icon made by a person on a megaphone. Devices, software and regions are the same.
The conversation was that the presence / absence of a plus does not determine the presence / absence of aggregation. And the example with S9 + for different regions is a confirmation of this.
Attached Image


Post has been editedplazmatics - 05.08.19, 20:22



Rep: (104)
* dr.eamer Yes, the design did not seem to change.
Power and performance - power management - wait for the scan - uncheck all the boxes - click the fix button manually.
Attached Image


Post has been editedplazmatics - 05.08.19, 20:09



Rep: (104)
* vvevvevve , in the s9 group on snap, there was a discussion. I myself am the owner of S9 +, they revealed a pattern by typing.



Rep: (104)
* Parador , maybe, immediately after the update, there was an old animation for a couple of days. Today I connected and saw a new animation, I can not understand the logic.



Rep: (104)
Did everyone have a new animation when connecting the memory to 10.4.1?



Rep: (104)
* jimm031 , plus, minus all this is big deal. A great example of the Samsung S9 +, for Hong Kong on the dragon. Shows plus when the total band is more than 30 MHz. The exinos version does not suffer from this, as soon as there is aggregation, even at 5 MHz - it shows a plus.

Post has been editedplazmatics - 05.08.19, 09:35



Rep: (104)
* korshe , go to settings and enter the location in the search bar. Set high precision.



Rep: (104)
* Rusty hearts , on the last software, the battery also leaks in the background by itself, autonomy is clearly affected.



Rep: (104)
* bald85 , an order of magnitude = ten times that, which is impossible.

Full version

Help     rules

Now: 09/06/19, 20:40