Hello, help restore the 4032d alcatel recovery does not flash, it costs the factory and does not accept the firmware for this program, but the computer does not have what to do? and others. you can’t install the phone

People reload the firmware you need very Color OS V3 (kitkat 4.4.2)

Now there is a stock 4.4.2, I want to upgrade to Lolipop and so that there is no garbage in the Asus system. Cast or drain and cut out the garbage ??

Post has been editedorencore - 04.04.16, 21:09

Instructions for flashing the device using FactoryDownload.
1) Download and install files
We will need FactoryDownload, Drivers and the firmware itself. We take all this in the header.
2) Unzip the firmware from the archive to any place
3) Unzip the program FactoryDownload for flashing to any place.
4) Install the driver
5) Run the program FactoryDownload and select the firmware file by clicking on the gear
6) Wait until the firmware is downloaded. "This will let you know the green bar below"
7) Next, press the button Play in the form of a triangle
8) Turn off the phone and turn the battery
9) Hold the key volume down and connect your phone to your computer. you need to release the volume , when the flashing process started
10) The firmware process will go when you see the inscription passed or finish press the stop button in the program, it is in the form of a square.

Do everything at your own peril and risk. I am not responsible for your devices and would not advise you to interrogate the phone at all without luck.

Post has been editedorencore - 21.01.16, 11:53

How to enable USB debugging
If anyone has a hidden developer menu, this standard way of enabling USB debugging works:
Menu->Settings-About phone , scroll to the bottom, and click 7 times on the "assembly number", a hint will appear in the process and at the end something like congratulations " You became a developer "
Go back to the menu and see the item "For developers, "go in, click" on "and just below we see" USB debugging ".

Increase the volume of conversational dynamics:
Looking for ROOT rights!
Go in/ system / etc / scroll down and look for the file codec_pga.xml
Open with any editor, scroll down and look for the code:

We need only the second lineEAR Playback Volume change parameter bit = "0" to bit = "1" (or bit = "2").
Save, reboot the device and use.
p.s. You can put more, the parameter sets the max volume, i.e. a shift, but then wheezing is possible. In any case, the volume during a call can be turned down with the button. 10 times think and check the volume, hoarse or broken speaker will be on your conscience, all at your own peril and risk.
Just in case, I spread the original file Attached filecodec_pga.zip
Thanks for the user instructions Evil

Repair IMEI
First, take and download the archiveDownloadeither from the cap.
We unpack in any convenient place for you.

• 1. Run the program, select the USB port, click "Mode select", select "Calibration mode".
  In the settings and in the description it is said that the power of the usb cable (red wire) would be cut off, in general, as soon as the program intercepts the phone, it is not necessary, in the case as with the firmware, so do not cut anything.
  
• 2. Click Set. Leave the checkmark only on "IMEI1" (Imei src check, save imei, save to can be left), save.
  
• 3. Connect the included phone to the computer, click Read, on a yellow background a message asking you to turn off the phone, turn off without disconnecting the cable and wait ... (Maybe you can immediately read the phone off, press, describe how I did)
  We are waiting for the current IMEI to write on a green background, so everything is in order.
  
• 4. Enter your IMEI in the IMEI1 line, press "WRITE", on a yellow background there will be a message asking you to turn off the phone, take out the cable, predict the acb, insert the cable. A new name will appear on a green background, press STOP. We distort the battery and turn on the phone. Enter * # 06 # and see your IMEI

If, after switching on, you see a robot with an exclamation, clearly interrupted the operation, distort the battery, and turn it on.
p.s. That's not all, under IMEI there is s / n, the program can also register it, but under the acb there are 13 characters of the serial number, but you need 14, what is the missing character, who was not sewn, look at the settings in the settings (general information about the phone) and compare spelling so that under akb.
Many thanks to user losev.88