Rep: (15)
Thank you very much for the answer. I did not think that everything is so simple. The regular file manager and ES Explorer did not flip the dial in any way.



Rep: (15)
Lord! The pebble application does not “pick up” the dial file, when opening the archive and the subsequent attempt to select the application for installing the file, there is no pebble application in the list. Maybe there is a folder in the phone’s memory where you can “upload” the dial file and it will appear in the application.
Huawei p10 phone, pebble 2 watch.
Thank you in advance.



Rep: (15)
* makc31423,
Try to update the application through the "my applications" menu, two updates arrive immediately and Google and wear OS.
And if you try to go to the update via wear OS, the device does not see it ...
Some kind of magic.



Rep: (15)
I have pro6 on it, third-party cameras start up, so I suggested you try to localize the problem, if focus does not occur, then the focus sensor is most likely to blame and not the camera.
p.s. on Avito in St. Petersburg, a person parses pro6s.



Rep: (15)
* hapik,
I do not quite understand your message, what is meant by "does not channel"пјџ On Ali there really are no cameras on pro6s, my mistake, on the usual firmware they are like dirt.

Post has been editedlsx - 28.10.17, 21:03



Rep: (15)
* hapik, You most likely have a problem not with the camera, but with the focus sensor. You can buy a camera or sensor on Ali, or search for a “brick” on Avito.
P.S. try to put another camera application ...



Rep: (15)
Thanks for answers.
I'm going to try now.
Last question, sew through adb with a sequence of commands from the header? Do you need to rename files as in the instructions for unlocking the second sim?
Upd. I asked again, tried a couple of modems, it only got worse, but on one wifi fell off.
Trying to get back.

Post has been editedlsx - 03.10.17, 23:31
Reason for editing: flashed



Rep: (15)
2 xronos If I plug in a Verizon modem, will two sims work?



Rep: (15)
Dear forum users, recently I am the owner of the XT1581 and everything would be fine, but the unstable work of 4G is a little annoying. In this thread of discussion several times there was a proposal to upgrade the modem to another version. But! When the modem is flashed from the “Mexican” (I could find these files), the cellular connection does not start, the body gives a message that there is no one SIM card, the second is not available. He sewed according to the instructions from the cap.
I ask you to poke your nose, what am I missing? And please give a reference to a working modem for the Chinese.
Thank you in advance!
P.S Modem version M8994_1255341.44.01.95.01R KINZIE_CHINA_CUST



Rep: (15)
* Crati There is only one speaker.



Rep: (15)
The better to stick it on?

Double-sided tape.

Post has been editedlsx - 28.01.13, 14:56



Rep: (15)
I don’t know, maybe it was already.
I bought a phone from a new batch, and the screen is there for 7 touches. : D



Rep: (15)
moneycan what recovery do you enter? Is the screen upside down or normal?



Rep: (15)
Fedot-96 @ 08.23.2012, 12:34*
texet OTA Updater

Everything is very simple, the update is downloaded to the internal memory and the device can be updatedfrom a memory card onlytransfer the update.zip file to the memory card and after the message "texet OTA Updater, the update was downloaded successfully, to install, click reboot and hold the + button for 15 seconds" when the device restarts everything should work.
p.s honestly, I would put CM9 and not steam.



Rep: (15)
Brotzers @ 05/30/2012, 18:44*
is the box not in the lower left part?

Exactly.
Oh no, there are three squares, one approximately in the middle of the second in the lower right third, the third in the left corner.

Post has been editedlsx - 31.05.12, 13:38



Rep: (15)
I bought this animal the day before yesterday, everything is fine, everything works, I did not notice any special brakes.
There was a small "pigtail" on the screen on a white background shows the uneven illumination of the matrix, a speck of about 5X5 mm. I disassembled the device (everything is simple there, 4 bolts and a bunch of latches), took out a rubber small square to support the battery, and everything worked out. Even the screen has become more responsive to touch.



Rep: (15)
1-Go to the device manager and look, maybe not everyone has firewood.
2- Actually, in your laptop, in the Russian version of the delivery, WiMax should be installed (I think it is stuck in the place of the 3G modem).
3- Bluetooth should be, it goes in all the laptops of this series.
4- if you do not have an official notebook series, that is, there is a possibility that the 3-G modem is still inside, then you need a SIM card and the Wireless Manager application and it will work.
5- management of wireless networks FN + F11
6- turning on the camera FN + F6 - at least it’s painted on the keyboard.



Rep: (15)
As I understand it, the author is trying to connect to someone else’s network that is not password protected and is being thrown out of it?
I do not want to seem abstruse, but really the author did not hear about filtering by mac - address?
In order to connect to such a network, you will need to find out the list of "allowed" mac-addresses and change yours accordingly.



Rep: (15)
For all!!!
I constantly see questions like "I installed the system and some devices are not being detected for me, how can I fix this ?!"
I explain how to do this without even knowing what is inside the computer. Step by step.
  1. We go to the device manager.
  2. Right-click on an undefined device.
  3. Select the Properties item.
  4. Select the Details tab
  5. Go to the "equipment ID codes" tab in the drop-down list
  6. Copy this ill-fated code (by pressing Ctrl + C)
  7. We go into any search engine, paste the copied code into the search bar and in 99% of cases the first 10 links lead to either the pages with the drivers or to the forums with a discussion of where to find these drivers.
  8. Download the driver, install and enjoy!

I hope I at least helped someone: D



Rep: (15)
I will be banal ...
At the time of the initial copying of files, when the system asks "where else to get certain drivers" to tell the system where they are located (as I understand dos-commands you remember).
The easiest option is possible, download the READY system with integrated drivers.
Or take the driver not from the manufacturer’s website, but from intel.com.

Full version

Help     rules

Now: 08/24/19, 13:49