Rep: (0)
guys help out
I bought this model in Chinese. The modem has been unlocked to work with any SIM cards. But I needed a web-based interface, I decided to flash. After installing the modem firmware can no longer see in Device Manager. Thus Seeding displayed. The new firmware is not installed, they simply do not see a modem. With the computer deleted all dial-up program. Drivers for the modem installed. Tell me what could be the problem?
Their own decision is not found (



Rep: (0)
user334 @ 28.03.15, 04:59*
The theme is scarce, so will share his research after many hours studying the issue.
I have the modem Huawei E160G zabrendirovanny Beeline.
I will describe the steps of the procedure, which has come:
0) It is said that Osim card must be during this whole process is laid out so remove it.
1) Install the complete version of the software that is already recorded in the modem. You need to already have the wood on it. In my case it was the Beeline Connect.
1.1) We write in the notebook IMEI of Beeline Connect and do not lose it. Some of it can be printed on the device, but it will have to be inserted so that the need in the form of text.
2) Close the Beeline Connect fully, check that it is not settled in the tray
3) Run the file E160_11.608.08.81.00.B409.exe, agree with the PM on the first screen, will continue to search for the device and connect to it. After a window appears with information about the current firmware version, the new version to be delivered, as well as displayed IMEI. Click Next, the program around and ask the password to continue
4) Run HUAWEI_Calculator.exe, inserted into a single field modem IMEI, click the Generate, we get at the end of the two codes, Unlock code and Flash Code. We need a second. We put it in the box from the previous step, click next, wait for the modem to sew.
5) Next, there are several options. Need to update (replace) the built-in dashboards (Beeline Connect) to the universal. This is done in the same way except for code generation. The enclosure has several update files (starting at UTPS), which, if you look closely, the numbers are different version.
UTPS11.030.01.00.209_MAC11.201.03.00.209.exe - the oldest of the represented. MegaFon taken so that they are well and zabrendirovan. But like working with other operators.
UTPS11.300.05.00.03_MAC11.202.08.00.03.exe - huawei old
UTPS23.015.02.00.03_MAC23.015.02.00.03.exe - huawei most new one found, which can be sewn into the device. It seems to support Windows 8.1
UTPS23.009.09.01.983.exe - huawei, a little older than the previous one, but it seemed more nimble and functional. By the way, you can see from the name of the file that it does not support MacOS. But it left in its modem I did.
In general, as far as I understand, on the computer to work with a modem, you can install any version of Huawei Mobile Partner. Huawei on complex sites, but you can find different versions of freshness and newer works too. Just do not ask them inside the modem.
As a result, I can successfully earned with Tele2 SIM card.

I did everything according to instructions. modem beeline, Beeline sim card with the old tariff. Internet does not connect. sms come but not sent. But the juice with calls. If you call a modem that time a connection modem is disconnected from the PC and connect again. If the call to the modem, the modem is lost after clicking on the button receiving a call.
dc-unloker says that the voice enabled



Rep: (0)
Found in a drawer bilaynovsky e160g modem. I want to activate it in the voice and the ability to insert Simka Tele2
dc-unlocer not helped. what to do with the firmware, you do not understand. Please give detailed instructions on where and what to insert where that push.
My modem
Found modem: E160G
Model: Huawei E160G (Beeline Russia)
IMEI: 354300028642490
Serial NR. : DL9RAA18A1304511
Firmware: 11.604.21.01.161
Compile date / time: Sep 18, 2008 20:30:52
Hardware ver. : CD25TCPU
Dashboard version: UTPS11.002.04.05.161_MAC11.110.02.38.161
Chipset: Qualcomm MSM6246
NAND Flash: SAMSUNG_K9F1208
SIM Lock status: Locked (customized firmware)
Wrong codes entered: 0 (unlock attempts left: 10)

thank you in advance



Rep: (0)
Vizzle @ 02/23/19 05:12*
But still - can someone convert the instagram?)

I join the request



Rep: (0)
Guys, somebody looks through the NHL Cody? how best to adjust?
natural variants Freestuff



Rep: (0)
roxalex @ 14.12.18, 22:17*
First connect the console via USB, and then brought up for a second, she let go and the monitor result. Reset and power is not touched at the same time.

Clarify a little bit, and then the network as combinations
Loading Burning tool, remount firmware connect cord box, a push start the installation process has gone, 2% program generated an error, it starts the process from the beginning. That's when you need to restart the lock. I understood correctly?



Rep: (0)
graf_8 @ 13.02.17, 18:03*
After a failed firmware via SD card for firmware XTMOD was brick with a red diode. Prefix then none at all if not determined. It helped only this method with contact closure. Launched USB_Burning_Tool --- chose --- firmware press start --- connected male to male --- closed contacts 5 and 6. Everything is fine thank you. This is probably the last method which is worth experiencing IMHO.

roxalex @ 08.02.17, 23:00*
I began to dig further - find info, that whiling away the 2 and 3 did not help. Then I loaded USB Burning in advance and picked up a console cable became whiling away the first 2 or 3, and then switched to 1 and 2, and at some point console blinked red, turned blue and went firmware.

share algorithm, at which point up the rear? in what was connected? Is reset clamped?



Rep: (0)
VALVIN @ 12.12.18, 23:37*
killer953, try like this

thanks but did not help



Rep: (0)
It looks like when you try to sew with the stick has done something wrong, is now in a state tvboh brick. Firmware of the caps have tried everything, I tried 2 different cables and different yusb ports. Power supply is connected at different points. Who can tell something?
TV Boh my beloved mother, and if I do not fix it, and it will remain without serialchikov, I was castrated! Requirement!



Rep: (0)
But there is an alternative?



Rep: (0)
vovka36 @ 07.12.18, 17:36*
Try at the beginning of the stitching, so right at the time when they start to go interest to connect an external power supply. That is not in front of the firmware, namely, when she was gone, but the bugs yet. I was such a problem when sewing error and 2%, and 4% - is solved in a hundred percent of the cases in this way.

I tried to connect the power supply immediately after dilin-dilin and top percent. The result of one, two percent and an error. I tried to make a bootable USB flash drive. Now on TV-box red light and nothing else is not loaded. The program yusb borning tul starts loading without hold-output AV button. Please provide links to hundred percent working firmware and sensible instructions to create a bootable USB drive. Thanks!



Rep: (0)
Sews through usb_burning_tool
2% gives an error "[0x10105004] Romcode / Initialize DDR / Read initialize status / Error result" search has not given anything. What to do?
tried different firmware

Post has been editedkiller953 - 07.12.18, 11:51



Rep: (0)
My hdd began to fail, I want to go on ssd
modest budget: 4000r
motherboard: asus p8z77-v lx
Processor: i5
Memory: 240gb
windose under 10
I live in Novosibirsk

Help me choose please



Rep: (0)
~ Vasay ~ @ 10.06.18, 18:29*
Because. My advice:
Olympus Pen E-PL7 Kit

Because
This stylish accessory ( "family photos" should appeal)
Relatively compact (can be registered in a purse, and not at home on the shelf)
Kit lens relatively good.
Auto mode from Olympus is friendly to beginners (JPG from the camera to capture beautiful without obrabotak in Laytrumah and Photoshop).
Possible to install an external flash, "puff up at the ceiling," will be very helpful in the premises. Especially when photographing restless dogs.

Minuses:
- there is no viewfinder.
- Optics expensive than Canon.

Thanks a lot. All of the case and clear.

Besides Olympus above the reduced Kenanov can something advise?

Post has been editedkiller953 - 10.06.18, 14:42



Rep: (0)
of fiscal reflex here even talk no one wants, but can somebody specifically say how bad these models?
Canon EOS 4000D Kit 18-55 DC III
Canon EOS 1300D Kit 18-55
Canon EOS 2000D Kit 18-55



Rep: (0)
* ~ Vasay ~,
I need regular family fotik sfotat mother in law, dog exhibitions and TP. But the "family photographer", she is "accountant" does not want to boo and give 25,000 for a bar of soap does not want to. Yes, the budget was increased to 25000r. But this ceiling

Post has been editedkiller953 - 10.06.18, 10:15



Rep: (0)
I understand that this budget is no one to advise, and what is the minimum for a first DSLR?



Rep: (0)
As options:
Canon EOS 4000D Kit 18-55 DC III
Canon EOS 1300D Kit 18-55



Rep: (0)
Advise budget SLR. The flash is required



Rep: (0)
Advise budget SLR. The flash is required

Full version

Help     rules

Time is now: 04/08/20, 13:18