Rep: (17)
* ctich Once decided on a lazy to do everything: P, and you got me right away like this and that .... Thank you;)



Rep: (17)
Hello, tell me pliz what is better to replace atheros AR9285 so that it can be supported without dancing with a tambourine



Rep: (17)
The SSDT guys table for disabling NVIDIA cards is in the efi / clover / acpi / patched folder, the screw seems to die as during the file copying operations, the system hung tight, which is why it decided to upgrade and then reinstall, replaced the screw and the installation is in progress. Thanks to all



Rep: (17)
* ctich The video is built into the processor, the disc is disabled by the patch. Clover fresh



Rep: (17)
Hi guys, when installing 10.14.4 I get such a screen, tell me what it is and how to deal with it. I put on the laptop with a signature, I tried to just upgrade from 10.14.3 then the laptop hung on the inscription 17 minutes left

Attached images
Attached Image



Rep: (17)
* ANDpanovv , When installing macOS, the -v debug = 0x100 keepsyms = 1 switches are required !!! Read the cap carefully.



Rep: (17)
Guys, please explain what he does not like. Periodically after the reboot appears

Attached images
Attached Image



Rep: (17)
Guys, tell me pliz where to turn on the touchpad function in the kext, at 10.13 in the settings there was a touchpad and there you had to put a daw to use tap as a click, now there is no touchpad in the settings and you have to click the buttons. Everything else works

Attached files

Attached fileApplePS2SmartTouchPad.kext.zip(347.29 KB)



Rep: (17)
* johnmart , there are instructions in the header which keys need to be installed and which patch to see a panic, and already look at it, what does not work for you and what needs to be corrected



Rep: (17)
* vcreatyv , that yes, probably well sawed everything since 10.13



Rep: (17)
* Mrreznitsky , I have some kind of game at 12.6 and works at the hospital and on the laptop, and at 13.6-14 does not work anywhere



Rep: (17)
* Mrreznitsky , my friend and you eirpley works?



Rep: (17)
* ctich Thanks, as always on top: thank_you:



Rep: (17)
Hello everyone, my laptop boots up for about two minutes at 10.13 and at 10.12 per minute and 10 seconds. When loading high sierra, about 40 sec hangs on this window. Is this normal or not?

Attached images
Attached Image



Rep: (17)
* Taurosrmk , on my laptop on hdd, high sierra and mojave it takes about 3 minutes, and sierra in one and a half minutes. Perhaps this is because of the apfs, it is probably designed for SSD and on hdd tupit at startup. At the hospital, there is an SSD, but the high sierra is still longer loaded than the sierra

Post has been editedhan aleksandr - 01.11.18, 14:09



Rep: (17)
* ctich , Also there is a suspicion of a hardware disaster, thanks :)



Rep: (17)
* ctich it just turns off. I press the power button and the computer starts as if nothing had happened



Rep: (17)
I would be grateful if you tell me, my laptop itself sometimes turns off, the temperature is 45-65 degrees, it works on the integrated video, the discrete one is disabled by the patch. It is cut down both on high sierra and on sierra, it immediately starts without problems. The laptop disassembled and cleaned the truth, but did not change the paste. Perhaps there is some way to find out what else he needs, except for the service of course



Rep: (17)
* BNcboJIbIN.KPoT , he can’t do anything, but if forced, he can, but not for long



Rep: (17)
* fantom4ix , in the red cap, we have already identified iron, but there are still “especially gifted” personalities

Full version

Help     rules

Now: 08/30/19, 20:43