Rep: (9)
0x0 @ 09/30/18, 03:14*
Try connecting to the speed of 116516 8 N 1!

I came across a similar problem with another router. There the problem was solved at 118400.
I tried for 118400, the text became readable but TPL does not accept.
The same topic on 116516. Text readable but TPL does not accept.

Post has been editedgamester! - 01.10.18, 11:14



Rep: (9)
I have TP-LINK, Model TL-WR840N ver 2.0 and such a problem:
Connected to Serial 115200 8 N 1, by turning on the power in Putty, I observe krakoyar.
As soon as Kernel begins to load everything readable.
Accordingly, I can not enter the TPL command.



Rep: (9)
[QUOTE NAME = "VITOCHEK" DATE = "08/20/2016, 20:05" Post = 52350725]
FCTSU001 @ 08/14/2016, 10:22*
S1GN1 @ 07/21/2016, 18:11
The phone begins to discharge from energy


Well, how helped? I still have everything left, it began like you, I changed the wire helped, but then stopped charging, changed the controller and the battery, so here they are in% jumped, until 30 comes and all - 15 and death)) advised calibration and a month to like, nothing changed, and I probably bought another 1 battery, and she turned out to be buggy (eBay taxis))) So now again, it goes crazy, can discharge the battery in 10 minutes after a night charging, although if you do not touch And the day to hold out .... and it all started to install the last according to the official (((I will try to calibrate, of course again, can take off to the factory settings, what else can I do not even imagine ???
people can still tips


Also began incomprehensible jokes with charging. The phone can be charged to 80-90% and then being discharged on charging. You can charge the phone up to 100% with charging and after a few minutes the charge can fall to 85-95%. And then gradually discharged until the evening.
Charging and the original wire that went with the phone.
I usually put the phone for the night. Those. In the morning charge 100%. In the morning, the alarm clock with a vibratory and the phone suddenly cuts out and on the screen of the discharged battery icons. It is worth removing with charging and enable the phone and the charge level of 95-98%.

Post has been editedgamester! - 10.10.16, 12:22



Rep: (9)
nechto_5800 @ 09/29/2014, 18:22*
Here, some instructions for beginners, and then often questions began to arise.

Changing graphic resources in * .apk without decoding.
It is assumed that there is a file manager or archiver who knows how to work with * .zip archives.
1.We take the necessary * .apk and open (in my case Total Commander), or unzip it.
2. Find the folder * \ res \ drawable-mdpi \, it contains graphics (*. Png).
3. Find what we want to change and replace with the desired (in color, content) calling it the same as the original to be replaced.
We make sure that the parameters (width, height, ...) of the new image match the original, if you do not want to bother deeper.
4.If you went to * .apk Total, then everything is already repacked and you can immediately use * .apk.
If unzipped, then archived without compression, referred to as the original.

I'll add a bit.
I changed all pictures with redon green. Used the Paint.Net application (not to be confused with the standard Paint). It used the only operation of effects>Color->Single Hue. It was set to Hue = 125 and received a picture of a green equivalent red.
Changed pictures directly threw the * .apk application with an archiver without compression into the original folder.
Attached ImageAttached Image


Post has been editedMamay72 - 04.02.16, 14:00
Reason for editing: Removed images under spoiler



Rep: (9)
GreenPack

GreenPack

Author : Gamester!
Firmware : Version 0.1.
Description : For owners of Skoda and other cars with green backlight buttons.
Finally, I had a little time and I redid most of the applications from the Kaier 2.9.5 firmware in green tones.
Add. screenshots
Will be

Installation : Applications from the archive must be unpacked and copy to the / System / App folder. Need root rights and partition must be connected in R / w mode.
If you copy over the source applications, the access rights remain like the source applications.

Radio and Ekvalizer are not yet completed compared toRadio in the header. They still have red inscriptions. To fix them, you need to decompile the application. Part Software in XML files and part directly in the code.

Most applications work for me.
Could not test iPod, Recorder and climate display, since I do not have an iPod and a video camera and the climate is not displayed on dorestayling octavia A5.

Please test and add to the header.

Attached files

Attached fileGreenPack_2.9.5_v0.1.rar.(4.15 MB)


Post has been editedgamester! - 04.02.16, 01:19



Rep: (9)
I noticed a radio tape recorder with a resolution of 1024x600 and the MSTAR quad-core processor and it seems to be overclocked that to 1.2 Toli to 1.4 in appearance of our interface. It looks like the Chinese are a little contapgradied Hard.



Rep: (9)
NV0001 @ 09/11/2015, 08:08*
And I want to control McGunkitol from the steering wheel. not to be distracted. The service says that the buttons put too hemorrhoids and do not take (Yeti first configuration)

As a shkhodod, I can say that the steering wheel is not so difficult to change. You find on disassembly steering wheel with buttons, well, or a new one, but new expensive. It is still possible to need a new fuel cushion.
And then you need to know what kind of steering wheel in you in the car. Dillers can say. And you are looking for info whether it supports the steering wheel with the buttons. Again, on the disassembly, you can find the desired steering unit. Along with the steering wheel with the buttons you can put a cruise control. There is nothing complicated in the internet a bunch of information.
After all collected you need to activate the settings in the brains of the car.
If you wish, you can still have the heated steering wheel. I did myself.

Post has been editedgamester! - 11.09.15, 22:15



Rep: (9)
Good day. I have a device B351_v1.1 which is successfully operating 2 years on the Wasser 1.2.5 firmware. Recently, I noticed that FHD movies slow down and the image lags behind the sound or vice versa. The device is connected to LAN and distributes WiFi as an access point.
Is it worth changing the firmware on Wasser Kitkat 1.0.4 or some other. Who will advise?



Rep: (9)
yurchnko.yu1 @ 03/20/2015, 17:57*
Help people! I wrote, but no one answered. Dear Zopo users, you need help. When talking on the phone, my interlocutor gets a background sound (hum, whistling, having). Manifests syndrome periodically. What could be? And what to do?

The same garbage. Is there any decision?



Rep: (9)
Put the firmware 2.9.5. There is no red inscription. I have a radio tape recorder with the 1st version of HW.
Radio as in Kaier, but the buttons on the steering wheel perform the frequency rewind and not switching between the memorized radio stations. MCU changed on 14 HW version - did not help. Put his radio with green tones from a cap from one of the old firmware, began to switch between stored radio stations. What Lancher did not watch. I use Nova.

Posted on 15.05.2015, 14:31:

Deloza @ 05/13/2015, 21:38*
Tell me who is on the firmware 2.9.5 - there is a radio widget? I disappeared.

Also disappeared. He took the radio in the green tones from the old firmware.



Rep: (9)
Sergey6767 @ 05/14/2015, 21:09*
And the touch buttons on the panel did not work correctly and work. What is done with them?

In the Additional Magnitols settings there is a clause where you can override the purpose of the buttons.



Rep: (9)
GIM12 @ 04/20/2015, 11:34*
Inet will be, but only (Clearly) in 2G
Well, do not please everyone. Personally where I need no, 90% available WiFi

3G really eats a battery that is not even more than WiFi. As far as I understand it is due to the standard itself. When using WiFi, you can put the WiFi shutdown in waiting mode in the settings.
But if you play and put up the update of traffic jams, mail, weather and calendar 1 time per hour or less often and 3G is eating a battery less.

Posted on 04/24/2015, 00:34:

GULTATNIK @ 04/21/2015, 18:53*
When charging, I already have a green color of the LED, which signals the full charge.
And even with the remaining 15% charging, if you use a smartphone for a few minutes, then
The charge drops from 15 to 1 percent very quickly.

90% - the green LED is on all Zopo. For 980 there is a patch that gives green light only at 100.
Similarly, the drop drop at 15% is very fast.

Posted on 04/24/2015, 00:37:

I ordered a calene glass on the screen. Let's see how you arrive. ONEPLUSONE colleague with such glass looks so quite decent.



Rep: (9)
Rylovs @ 02.01.2015, 16:02*
First, a flash drive, with renaming to "recovery.img", sew "cwm_mx4_cn_zp999_v4.img", then through it C SD cards use "Update-SuperSu-v2.40.zip"

In addition to CWM, there is still TWRP Recovery. I tried to get root in it - unsuccessful. Although the patch is carried out and log works as much as CWM.



Rep: (9)
AVMSPB @ 03/25/2015, 18:53*
Similarly. the same situation. The battery is selected very quickly. Also in the Battery Application, everything takes the network and standby mode - 37% and 33%.

Turn off the mode of operation in 3G. It is he who is very much eats a battery.



Rep: (9)
It is clear, I have an external block. Which imposes dynamic parking lines. There is a choice of a car from the list and setup. I thought you could refuse from him.
By РћР±Рґ, I understood that SS and RZC are the names of the CAN blocks. I have RZC.

Post has been editedgamester! - 02.03.15, 02:29



Rep: (9)
DIZZ74 @ 25.12.2014, 08:01*
I learned a bit about the "bending" the parking lines.
only works on
VW (car id = 10)
VW OBD (SS) (car id = 12)
VW OBD (RZC) (car id = 13)

Someone did run dynamic parking lines?
And who will tell you what is the car VW OBD (SS) and VW OBD (RZC)?



Rep: (9)
From the experience of replacing the tackets, it is better to buy a screen + touch + hull. Difference Screen + Touch and Screen + Touch + Case Several USD Of course, a separate touch is much cheaper, but when you drank the Tacha from the screen (it is from the experience of other Zopo) you can damage the screen.



Rep: (9)
By the way, if anyone has a connection problem (the phone loses the connection indoors). Then it is very easy to be treated. There are mechanical problems. He treated 3 phones. But how to find a harsh speaker for conversations, we can tell me (the service menu of sound and cleaning the speaker does not help)?

Post has been editedgamester! - 22.02.15, 18:19



Rep: (9)
Who can throw out stock launcher firmware 0818?
Replaced on Launcher with a 4x5 grid without a search period and constantly crashes Launcher error.

Post has been editedgamester! - 21.02.15, 04:02



Rep: (9)
Who can throw out stock launcher firmware 0818?

Full version

Help     rules

Now: 27.12.20, 16:22