A huge request to explain at the expense of the firmware, so as not to mislead users - WRITE YOUR SMART MODEL !!! Since this thread goes straight through two models P705 and P700, I immediately explain that for P705 the latest firmware v10D and update it officially will not work! !! And for the P700 latest firmware V10K, look for it only for your region !!!! Also, the owners of the P700 can flash their v10H firmware with the substitution of the img.ext4 file, thus obtaining the root. And then upgrade through the air to v10I, while the root is not lost ..Thank you for your attention and understanding! All files and programs can be downloaded at the bottom of the Instructions.
UPDATE FIRMWARE (official) LG-P705 L7 Download the driver in the topic header. And here is this software update program.LGMobile Update.exe and this file msxmL.msi - install it with firewood
We restart the computer, save contacts, if they are not synchronized to Google, run the LGMobile Update.exe program, it will automatically install additional drivers, connect the included smart via usb to the computer, the program synchronizes with smart and automatically checks for software updates, if there is an update, then the program shows it. Press the update software and wait until the program automatically downloads the update and installs it in smart.Do not disconnect the usb cable during the update and do not pull out the battery !!! Everything about everything (depending on your internet speed) will take just over an hour. The update itself lasts 15 minutes. The folder where the update program saves the firmware on XP C: \ Documents and Settings \ All Users \ Application Data \ LGMOBILEAX \ Phone
Only need in the Control Panel of the computer / folder properties / view - put a tick to show hidden folders FIRMWARE AND ROLLING OUT Drivers are installed as described above.
For thatUnplug the LG Android Platform USB Modem. To do this in the Windows operating system, go to the Control Panel>System>Equipment>device Manager>Modems>Right-click on the LG Android Platform USB Modem and click Disable. - This is very IMPORTANT, otherwise a bug will pop up constantly !!!
Important!!!! - We make a hard reset !!!!! Hard Reset or a full reset when the smartphone is off, is done like this:
1. Press the keys together, the volume is less and the start, when the touch keys are lit, we shortly press the right key, without releasing the start and the volume is less !!!! "you are on a smart. Smart will reboot itself.
2. Alive so through the recovery menu - on the off phone in order pinch the keys - the house, after 3 seconds the volume in the middle (better than a large fingell) and then after 3 seconds) and hold all three buttons before vibration when you go to the vibration , Everyone let go, in a minute and a half will appear green droid lying, press the start button (at the top) and hold the stock recovery yet. In the recovery, the sound button go down to step 3 and press the house button (average button). Yes, click the Lodge button, will go Poperess Cleaning .. The recovery menu appears again, the volume button goes to step 4 and click the house button .. the cleaning process ... again the reservoir again .. in this moment you can pull the battery .. According to the instructions attached here debug on yusb - is - settings / developer options \ top line, put a tick1) Extract the folder KDZ_FW_UPD from the archive with the flasher and move it to the root of the C drive:
2) In C: \ KDZ_FW_UPD create a folder named LG-P705
3) Move the firmware in .kdz format to it -
The firmware is in the topic header 4) We charge the phone to full charge (or almost full)
5) Connect the phone in the off state or in the power mode and wait until the drivers are installed (if you first connected it)
6) Disconnect the phone from the PC and turn off the phone
7) Clamping the buttons Volume up button + Power button - wait for the vibration and release, Emergency Mode - emergency mode appears on the yellow screen. connections -
Software This is at the bottom, so that the flasher could finish installing the firmware.
8) We connect our device to the computer (we plug one end of the cord into the computer, the other into the phone)
Tip:
preferably before removing the firmware to remove the memory card, SIM-card. We start the KDZ_FW_UPD flasher
In the Type field, select 3GQCT (3G Qualcomm CDMA Technologies)
In the Phone Mode field, select EMERGENCY
9) Specify the path to the firmware file (for example, V10A.kdz) by clicking the button to the right of the KDZ file field
10) Press the button Launch software update
11) I went through the firmware process
12) Do not disconnect the phone !!! (When the smart restarts, you need to put in the CONNECTIONS window -
Software it is at the bottom.
13) We are waiting for the notification of the end of the firmware process (== Completed ==), then close the flasher window and disconnect the phone.
14) Done, Enjoy: -D
And yet .. If suddenly you have some kind of glitch, and you can not flash the smart in the off state (this happens), then you will need to hold the volume button on the smart off and the usb cable, and wait while on the smart There will not be a yellow window with the inscription Energy II, and flashing in the state of energy. Also, do not be afraid of this error -MOD UpTestEX MFC Application encountered an error. The application will be closed. Sorry for the inconvenience.so it should be. P.S. The author of the instructions Snegovik, RZN and I added something specifically for our smart. I am not responsible for your actions and the consequences after them. We kindly request that you do not pull out the usb cord from the smart until the firmware program itself closes after the FINISH inscription. Also, when updating the firmware through the update program, you need LG Android Platform USB Modem CONNECT! Firmware download here Link There was a new branch on the firmware and root on xdaLINK 
LGMobile_Update.exe(255.09 KB)
msxml.msi(5.04 MB)
KDZ_FW_UPD_EN.rar(2.4 MB)
Thanks for attention :)
Post has been editedcompressor10 - 09.01.15, 00:08Reason for editing: Corrected instructions