Rep: (2)
Yuri11076 @ 03/28/19, 15:46*
dynasaur, according to the manufacturer, band 7 and 20 are in the PCT version 8X max
And how does the phone choose which one to work on ... according to the signal level independently, or should I switch in the settings?



Rep: (2)
Belarus @ 03/28/19, 2:40 p.m.*
dynasaur, is it on the PCT?
No, this is not 8X Max at all ... I dream of acquiring it (wife and children repulsed my first attack) ... we stopped at the fact that if the HONOR really works the 20_th gang - let's get back to consideration. :(
And I still can’t find out about its presence at all (20_ki) ... and the 3rd one is not reliable, it often falls.
They rely on the fact that they say, and so overlaid with mobile phones ... but I can give them to my grandchildren.



Rep: (2)
I went to the garden, I wanted to "catch" the Band-20 ... in short, or nifig himthere no, or it does not exist at all with us ( Izhevsk ).
Attached Image
Attached Image



Rep: (2)
Nordwestman @ 03/26/19, 15:39*
just not mini, but light. But in the market it is not
Sorry, I downloaded from the Market this morning (light) ... I have gangs showing ... above the screenshots laid out.
Pancake! I will wait or not ... when someone will put the thread screen with HONOR 8X MAX and with a gang of 20 !!!

Post has been editeddynasaur - 26.03.19, 15:45



Rep: (2)
Belarus @ 03/26/19, 12:20*
I am sure that somewhere in the settings there is some sort of checkmark.
You want to say that someone swings with a "tick", and someone does not?
I’m not special ... but I’ll assume that this is due to the local operator ... something does not report to the signal (like meat to lions).



Rep: (2)
Bolshoy163 @ 03/26/19, 10:23*
Also no

Belarus @ 03/26/19, 10:09*
Unfortunately not

Maybe you downloaded which thread is different ... I downloaded literally before the screen (morning in the morning), from PlayMarket, and there may be different ones ... I have one ...
Attached Image



Rep: (2)
Bolshoy163 @ 03/26/19, 08:55*
I also do not show bands
And cho, on the next page (UNPROCESSED ) also no?
Attached Image



Rep: (2)
Usually band 3, but after airplane mode, Megaphone jumped for a second to 7, and then to 1 band.
In short, I realized ... the device definitely catches 1, 3 and 7 (gangs) ... to find out about the 20th, you need to go to the area (garden).
How do they dig a car’s current (threw snow off the roofs of garages ... garages are not available), roll up and check (in terms of ...I will check for the presence of 20_ki itself... I have,untilOnly small Xiaomi RN6Pro).
Here, right at the computer also shows B-3 ...
Attached Image


Post has been editeddynasaur - 26.03.19, 06:48



Rep: (2)
Nordwestman @ 03/25/19, 9:22 p.m.*
20 seems to be in deep reserve. 7 works on a megaphone on PCT devices
CSNs are the same ones sold, they would only have to foist ... they write (in characteristics) that 20_ka works ... but I have never seen a confirmation ...



Rep: (2)
... maybe at 7or 20
What does this OR depend on?
What determines the choice of show ... if both gangs are at work?
It is a pity that no one posted ... a great desire to see such screenshots, with workinggang 7 and especially with the "trimmed down for the Chinese" gang 20 .
Without 20_ at the cottage nefig do (those. not worth buying).

Post has been editeddynasaur - 25.03.19, 20:22



Rep: (2)
Yuri11076 @ 03/15/19, 17:40*
and writes everything you need. See screenshot
And where on the screen is it clear that the B7 and B20 are working?



Rep: (2)
mike_ural @ 03.21.19, 12:56*
dynasaur, 4/128 at 660 there are no Chinese
I believe you ... they are not Chinese (probably Russian).
About the approval of the CSN (by frequency) ... as well as believe you?
Or is there still a thread to check? : blush:



Rep: (2)
So I want the shovel to be inhibited due to LTE limitations.
Question ... as a simple buyer (similar to me) at the time of buying (or even after) can make sure that the DNS_e did not lie with the "gangs"?



Rep: (2)
Dynasaur @ 03/21/19, 11:38*
The problem got out ... I entered a graphic password ... but it is red and the phone does not turn on ... I didn’t forget the graphic password (99%) ... exactly, what should I do?
"Taxied out" by myself ... in the "talk with subscription" mode (I called from another phone) ... with the (long press) rebooted ... the graphic key worked!
Now the question is ... is it like that for everyone ... does it require a graphic nag with a period of 72 hours? Is it possible to disable this garbage?
If you expand the question ... are there instructions (manuals) on our smartphones, like those that accompanied in the good old days on any equipment?

Post has been editeddynasaur - 21.03.19, 11:44



Rep: (2)
Hello. The problem got out ... I can not turn on smart.
The situation is this ... I always use my finger to turn it on, sometimes there is a requirement to enter a graphic (writes after 72 hours).
Today, after the same requirement, I entered a graphic password ... but it is red and the phone does not turn on ... made several attempts - to no avail.
I didn’t forget the graphic password (99%) for sure ... what should I do?



Rep: (2)
Roccuyanun @ 03.20.19, 18:32*
dynasaur, yes it is sarcasm. Unlikely.
I do not understand you ... sarcasm about the expansion of the number of "gangs" or what?
Chinese vendors have four frequencies: 4G LTE FDD: B1 / B3 / B5 / B8
And in the characteristics of DNS - already six: LTE 1800 (B3), LTE 900 (B8), LTE 2100 (B1), LTE 800 (B20), LTE 2600 (B7), LTE 850 (B5)
How is this possible ... maybe someone knows?
So I want the shovel to be inhibited due to LTE limitations.

Post has been editeddynasaur - 20.03.19, 20:09



Rep: (2)
Roccuyanun @ 07.02.19, 23:53*
... yes, bends will add
Sorry ... is this additive hardware-made or software-based?
If you buy from China "remake" will not work?



Rep: (2)
RScatch
try to turn off the "missed call reminder" in the settings>system applications>phone>Advanced settings .
A week ago, the effect described by RScatch also appeared ... now I checked the settings for the "reminder", I had it "disabled" ... it looks like it's something else, not a reminder.



Rep: (2)
Tell me, someone has encountered the problem of connecting to the Bluetooth jbl column, does not find it and that's it. How to be
It seems to me that all such devices (not phones) have a limited time for connecting via bluetooth.
That is, you must first prepare the smartphone, then turn on the device (those. initially turned off) and quickly turn on search and connect on a smartphone.
By the way, the car radio and car alarms, I also managed to "introduce" ... for a long time I knocked on "tambourines!"

Post has been editeddynasaur - 11.02.19, 11:42



Rep: (2)
I did not find the system ... a glitch on the forum - the memory size does not match (in posts and in the "koumiss").
Attached Image

The same is with Milkyway, RScatch, nxulzz, Lokomotivfuhrer, Romaks 91, Algo-127, BOB2763

Full version

Help     rules

Now: 08/24/19, 04:06