Brief instruction:
Here you have 1.00.00 L, we assume that there is also a file with the firmware. In addition to WM6, you will need 2 more firmware: 1.00.00_H and 1.02.00_H, take from here
HP iPAQ hx2 *** flashing FAQ (post # 444990)Their numbers are sp32408.exe and sp33003.exe. After downloading them, proceed to action.
1) We sew 1.00.00_H. Excerpts from Football FAQ:
We start the flasher 1.00.00 L. When a window appears with a proposal to flash the device, we simply reject the update. Then we need to run the firmware 1.00.00_H (sp32408.exe). In this case, an error window will appear and we exit the firmware. Now go to C: / iPAQ / hx2000, Run the hpRUU.exe file. An upgrade window will appear again with a suggestion to flash the device. At this point, we take and copy the .NBF file to the hx2000 folder from the C: / iPAQ / SP32408 folder, after renaming it to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf and now click the Update button.
After the firmware, we check the device’s operability (loaded or not), and delete all the folders from C: / iPAQ (so that the native .NBF file from the firmware 1.00.00 L is updated later)
2) In the same way, one by one we sew 1.02.00_H (sp33003.exe) and WM6. In all cases, we use the firmware from 1.00.00 L, changing the firmware file in it to the desired one ...