Hayemaker
All devices should be in the config, the necessary settings are specified for them, in other words, you should be in control of the system, not the clover.

Hayemaker
Fashion 0 is good, but I don’t know what I don’t like, I don’t like not to engage in SNOM, to understand what is wrong, I need to know that everything else works correctly.

Maybe in mbr, but you need a patch installer to install macos on the MBR partition.

There, just like a clover put on legacy.

in the cap there is a manual how to put on legacy, but why you mbr is not clear.

Yes, and why not, the board has support for PCI Express 2.0 Standard, but the video card is compatible with it.
On older 775/1156 boards, there is a problem when working with the RX5 ** they are higher than 10.12.6 do not work, but I don’t think that the situation is the same.
If you throw away nvidia and switch to IntelВ® HD Graphics 4000, you can still put 10.14.

evgeve,
If there are exactly 640 cores there, then you can take it, I have a similar one from sapphire, but on 4Gb it works great!


I don’t think it's worse, look at the budget, if you have money, you can take the RX560.

Noooo, I’m not going to suffer from garbage, the dsdt edits were needed on the ancient gland and are relevant for now for the laptops, everything else is from the evil one, so that "suffering" is without me))

Hayemaker
pmset -g and see what it shows

Maypavlov,
you need to put with the key nv_disable = 1

If you have knowledge of ACPI, you can suffer from a month, and then try to find a benefit from your sleepless nights ....

Need, read, it must be done -https: //www.applelife...ick-sync-video.817923/

steam3d,
native percents and vidyashka for poppy.

Hayemaker
Are you sleeping or hibernating?

Swimmercool,
Yes, 10.13.6 with fonts is much better.

Alas, there’s nothing sensible, I don’t have these problems on 24 fullhd, so I personally didn’t do anything for it, apple broke the fonts with the release of 10.14 and now many have a similar problem.

Swimmercool,
1989_yan,
All cakesonly in clover!

ZhenyaMC,
if legacy boot mode is yes.
What does the screen display?

makc8585,
Yes, 10.13.6 can be set but not higher.

Hayemaker
you need to choose the right efi for ami patch, these are modules aptiomemoryfix, osxaptiodrv / 2/3

daniil08092001,
You just need to put it in efi / clover / kext / * and that's it.