apostol444 Why? As I wrote above through the batch file, I managed to successfully open the som-ports on the test firmware, I only need access to the mass-storage mode and see in the explorer which letter will be assigned to the MainOS section.
And on yours so a ride, backup / restore QCN, DPP and sew on the official health.
And the diag mode is lost forever, now only from the backup / restore system to do, as advised valvord to put it into airplane mode before that.
The BDS menu has not yet been flashed on the official one, I am not looking for easy ways, through full access to the file system I got confused with the file developermenu.efi .., so that instruction is for all WP devices and you should do that.
But why do you need access to the mass on the official? I understand you need to return the QCN, so restore it on the test box by opening the som-ports through the batch file and sew the official one or am I not catching up with something?
You will not delete partitions on the test again, is the sim-lock removed already?
P.S. Although yes, at 5055W you may experience difficulties with enabling the Debug Policy. there is no BDS Menu, on Idol 4 Pro to get the test first unlocked from under the mastoraj, then from the BDS Menu I put the Debug Policy - Enable and with the path / bypass method of the reset protection (without mobile network and wifi) I upload it to the desktop , at the initial settings stage, when you already open the Parameters via the keyboard, turn on the developer mode, the device is connected via cable to the PC on the computer is visible (or it may have already been seen before), Interop Tools with dependencies can be easily dropped into the documents folder, you can put and through the conductor everything in turn l, everything works, open Edge through some blue link in the system, dial 127.0.0.1 there and here it is the Device Portal, then according to that instruction "bypass protection protection", in general, life with such a device becomes harder and harder, ehh ..
Weifai turn on already from under the Parameters during the bypass of the protection from the reset does not give there, you press and nothing happens.
Well, it is necessary to look how it will be, I can not check it myself.
Post has been editedabc145 - 12.04.19, 17:54