Rep: (1628)
This opus is suitable for almost all Samsung devices, perhaps with a few differences, but, most importantly, after reading this, you will understand the global Samsung firmware algorithm. that will allow you to become a guru - for free and without SMS! This can be said, a real "Course of the young fighter" for those who still do not want to part with the stock (official) firmware, and indeed the Android device has not previously encountered the firmware procedure.



To read - necessarily!

FIRST and most important!

EVERYTHING that you do with the device, you do ONLY at your own peril and risk! Never forget that.



SECOND.

Do not rush immediately after purchase to flash. Especially on custom.

Before starting the firmware, ask yourself the question - why do you need it? Just out of curiosity? Is the device buggy? Want a new firmware?

If the answer is: "Just out of curiosity." - think again whether you need it.



THIRD.

If the itch from the opportunity to flash does not subside, then MANDATORY BEFORE the start of manipulations with the device, read the topic, read the cap FULLY, read the neighboring branches - do not quite understand what is being done and what actions lead to what consequences - DO NOT START the firmware!



FOURTH.

You do not know what ODIN, RECOVERY-mode, DOWNLOAD-mode, CWM, ROOT, fastboot mode, adb, cmd and other terms you may not understand the terms - DO NOT START the firmware! Read first what all these terms mean.



FIFTH.

Have you read everything, understood everything, or just know all this? Perfectly! BEFORE starting the firmware, please follow these steps:

- make sure that the drivers for the device are installed on the computer or, better, install the latest ones (if they exist);

- make sure that you have a "native" or, at least, not quite a Chinese cord;

- make sure that the battery is sufficiently charged - 100% is recommended, but let it be at least 50%;

- put on the desktop files / unpacked archives needed for the firmware - this is for what they would be "at hand" and that would not accidentally choose something else;

- it is better to stitch from a laptop or from a computer with an uninterruptible power supply, so that in case of a sudden power outage or simply by accidentally pulling the cord out of the socket, do not get our favorite "brick";

- open the instructions for the firmware you need in a new tab, so that it is before your eyes;

- flashing, do everything exactly as the author wrote the instructions and in the order described by the author;

- never stop the firmware in the middle of the process (except in exceptional cases).



SIXTH.

If the firmware process suddenly stops at you and the device "hangs" in the firmware mode for quite a long time and nothing happens - safely unplug the power cord and check everything point by point. Do not be afraid to turn off the device in this case, if something could happen - it has already happened and keeping it in the connected state for a long time does not change anything. It is necessary to disconnect and check the points, what's wrong and whether the device is alive.

As a rule (in 90% of cases):

- you do not have a native or faulty USB cable;

- you have an antivirus that interferes with the correct connection;

- you have a faulty USB port;

- You connect the device to an incorrect USB port.



and finally the seventh.

If (God forbid, of course!) All the same something went wrong and on the sixth point everything is in order, then:

- for starters - “SEARCH” on the topic, without using “SEARCH” - do not ask, because most of the answers will be: "Read the topic!";

- didn’t find anything? - no problem! - ask a question in the topic, DETAILS and item by item describing what and in what sequence they did, as well as (necessarily!) from which firmware they tried to go to a new one;

- if there is no quick answer, do not produce messages - they will help you, if possible, they are silent - that means there is no answer yet, they will appear - they will write, usually all this happens rather quickly, be patient.



I REMEMBER ONCE REMEMBER - DO NOT UNDERSTAND WHAT YOU DO - DO NOT TAKE, YOU WILL HAVE ANYBODY ON ANYONE!

And be sure to read this post to the end - get a lot of useful and necessary information.

SECOND - actually the firmware procedure

Is the main thing clear? Let's go further ...
Kies ...

About Kisu reluctance to write, but especially nothing.

Here is the Kies FAQ

In short, it does a great job installing / updating drivers. Great for backup.

Now using Smart Switch, which has come to replace.



Variants of flashing / kernel firmware / etc.

Let us analyze the firmware procedure through the ODIN flasher.

Installing a new firmware.

Do not try to slip ODIN `y * zip-archive, he does not understand them! Unzip the archive! * zip archives are stitched through recovery!



1. If you have not installed KIES, install the drivers SAMSUNG_USB_DRIVER. Check the "connectivity" of the device to the computer. If "Kisa" is installed, then through the Task Manager we kill all the processes that have in their name "KIES".

2. Disconnect the device from the computer!

3. Download the program Odin on the computer.

4. Download the desired firmware, for example from here - Updato | Android News, Samsung Updates, & More

5. Unpack the downloaded archive into any folder on your computer. If you downloaded the official firmware, then most likely you will see two files in the archive.

Here is an example:

• I9500GXXLB1_I9500GDBTKL2_I9500GXXKL4_HOME.tar.md5 - the actual firmware file

• SS_DL.dll

ATTENTION! With a simple update of the current firmware, IMMEDIATELY go to step 7! Point 6 is not necessary to perform!

6. It is recommended (not necessary, but highly desirable) to do the cleaning of the internal memory of the device! All data will be deleted (contacts, settings, SMS, notes, etc.), make a copy!

We make preparations for the firmware:

• turn off the device

• press the "volume up" + "central key" + "power key" buttons and hold until the image begins to appear on the screen, release the keys. We fall into the service menu Android system recovery

6.1 volume control buttons move to the desired point wipe data / factory reset

6.2 confirm the choice of "central key", then confirm again for insurance

6.3 select the item Reboot system now to reboot, confirm the selection and, ATTENTION, prepare to remove the battery from the device

6.4 when “Rebooting ...” appears on the screen, remove the battery from the device

6.5 wait a few seconds (15-20) and insert the battery into the device.

This is done so that the device does not overload completely and does not begin to install the initial information it needs, from the firmware already installed! We did not clean it.

With a simple firmware upgrade (not a replacement), items 6 to 6.5 are NOT necessary to perform!

7. Run the ODiN program on the computer, press the PDA button and select the firmware file from the folder (or from the desktop) where you unpacked the downloaded archive.

8. We transfer the device to the firmware mode (Download):

• when the device is turned off, press the “volume down” + “central key” + “on / off key” buttons and hold until the image appears on the screen, release the keys.

• confirm the desire to start the firmware with the volume up button

• if everything is done correctly, the image of “android” will appear on the screen

9. Connect the device to the computer

10. In the ODIN program, click Start.

11. In the process of the firmware do not touch anything. The cable does not disconnect. When the program merges the firmware into the device, and that, in turn, finishes doing what it should with it, the device will reboot. Then it can be disconnected from the computer and close the ODIN program.

Flashing another kernel

How to flash the kernel - brief instructions.



Through ODIN.

1. Enter the download mode (volume down + home + power on the phone off).

2. Confirm your desire to flash the button "volume up".

3. Connect the animal to the BB.

4. Run ODIN.

5. In the PDA line, specify the kernel file that you will sew (-tar or -tar.md5).

6. Everything is ready for the beginning of the firmware. Press START, after the end of the firmware, the phone will reboot.

----------------------------------

Through CWM.

1. Put the archive on / sdcard.

2. Enter CWM Recovery (volume up + home + power on the phone off).

3. Select "apply update from sdcard".

4. Select the desired archive.

----------------------------------

Via HC_kTool (zImage needed) (ROOT required!).

1. Put zImage on / sdcard (zImage is the kernel, you can tear it out from the firmware, from -tar or -zip archive).

2. Sew the kernel from the HC_kTool program.

------------------------------------

Frequently asked questions and answers



B. After installing CWM, Bluetooth stopped working. How to fix?

A. Sew through ODIN stock kernel.



Q. Is wipe better to do before or after flashing?

A. You need to do wipe data only before the firmware, especially if you sew custom firmware. If you do wipe data after the office. firmware, then in principle, nothing should change, and if after a custom one, the consequences can be very different (depending on which custom) - from simply losing applications to a cyclic reboot or brick.



Q. How do I know the camera version?

A. In the standard dialer, dial the code * # 34971539 #, click on the top item in the menu that opens Phone / CAM FW Ver Check



V. ODIN sees the body in Download mode, but not a single archive is sewn through the PDA, and then all the hangs start ...

A. Run ODIN with administrator rights.



Q. After flashing, the mobile Internet disappeared, although the telephone part works, what should I do?

A. Manually register an APN (access point).



Q. And where to get this same "APN"?

A. At your carrier.



Q. The contacts are set to show only the SIM contacts, but when I use the search, I get skype, gmail, facebook contacts.

Can this be somehow fixed not removing them?

A. No, it is impossible. The fact is that the display and search functions of contacts are different and do not depend on each other.



Q. After unpacking, the firmware file is called I9500GXXLPN_I9500GXXLPN_I9500GXEFLPN_HOME.tar.md5, I also got some kind of SS_DL.dll file.

Should I remove .md5?

A. We do not pay attention to SS_DL.dll, we do not remove the .md5 extension in any way, we just sew this file.



Q. What should I do if there are no buttons in the menu recovery? I can't choose anything there ...

A. Volume - the choice of items, power - confirmation of the choice.



Denial of responsibility

This post is not and will not be a complete and comprehensive instruction on the firmware of the device and generally does not pretend to any laurels and is not something obligatory and forcing to certain actions, but is solely literary creativity, created "for the soul."



Post has been editedViolence jack - 13.07.19, 21:26



Rep: (1628)
Ff bar

To drink is, is not.

Attached Image


And he cracked bread in half, he smokes bacon,
And ketchup pours on the lips, loaves crunches.
And the light fades, dumplings delight your eyes,
In the dark kitchenette flying "Night Doge"!


Open up-read-pour it-have a snack!
Schedule: around the clock, without weekends and holidays.

Detailed schedule of FF-bar
: drinks:

365 (sometimes 366) / 24/7

Mon 0:00 - 23.59

W. 0:00 - 23.59

Wed 0:00 - 23.59

Thu 0:00 - 23.59

Fri 0:00 - 23.59

Sat 0:00 - 23.59

Su 0:00 - 23.59

: drinks:

So, you went toF lud- F leim bar!
The name of our barfraught with sacredimplies that we are here and argue and talk about anything and just communicate, because:
  • Flame - "dispute for the sake of dispute", messaging in places of multi-user network communication
  • Flood - not thematic messages in online forums

By the way, considering thatTruth is at fault, here is the very place where they give answers to any questions and this is whereultimate truth.
: friends:

Behavior rules To hell with the rules!
We are not sitting here for a cup of coffee and not sentimental ahi-sighs!
Because in the menu we have all the possible strong drinks from around the world,completely inadequatenot quite adequate visitors - yes, there are. Therefore, by no means, having enteredFf bar Do not shout "Hello everyone!", otherwise you risk getting a glass in the forehead from the one to whom you barked arm in the most crucial moment.
Do not try to talk about the weather - we are always here ... not bad ... good ... Great weather! } -)
Also, given that the bar for schoolchildren is not intended, read the sign at the entrance (persons who have not reached an adequate age for communication, entry is prohibited).
: drinks:

In our bar there are alcoholic drinks from around the world.
In our bar there are non-alcoholic drinks from around the world.
Our bar has snacks.Oh, yes - the dishes of the whole world!
In our bar there is everything, in short! Come, sit back, order.
In our bar there is a service "Subject to order". Order us a topic - we will prepare it for you (without a guarantee of taste) and,may be You can discuss it in the bar (meaning that you can ask us to talk on a specific topic that interests you).
: russian_ru:

The menu for today (tomorrow is the same) (carefully - the graphics!)
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image
Attached Image

Attached Image

Attached Image

Attached Image

: russian:

For non-drinkers and yazvennikov
Attached Image

Attached Image



Come in, here you are always sincerely welcome! : girl_crazy:


Ff-bar utility
Signature Code
thankXAKERART
Attached Image
[color = LimeGreen] [url = "http: // //savagemessiahzine.com/forum/index.php?showtopic=745709 "] [B] Flood'n'Flame [/ B] [/ url] [/ color]
[color = Orange] [url = "http: // //savagemessiahzine.com/forum/index.php?showtopic=745709""[BБФФ-Бар[/Б[[/url[[/color]
[url = "//savagemessiahzine.com/forum/index.php? show = LimeGreen] [B] Flame [/ B] [/ color] [/ url]


How Danila-Master FF-bar checked: good:
Periodic system of alcoholic elements: D

Recipes self cooking alcohol drinks

Employees and guests of this glorious institution
Director, tyrant and despot -Violence jack
Super bartender, can cute chat on any topic with visitors -Dutch78
Fisherman, always ready to tell the bike for a liquid reward and revive the conversation -january73
Local Koshak, usually hanging out on the counter, closer to booze, part-time administrator of this institution -darkwelder58
Civilian Taper_Danila_Master_
The rest of the staff (in the sense of human staff) is absent, all employees arerobots (XXI century in the yard, you see,).

Contingent
Lists, ik !, visitors and, ik !, the regulars.

Who drunk how much at the moment
The number of posts in the topic is equivalent to the number of drunk. 1 post = 1 glass. : D

Acknowledgments
thankzusicks438for the bar sign!



Bulletin board
Attached Image
Attached Image
Attached Image


Contests of our Bar
Participants:
To view the work click on the nickname

  1. DarkWelder58

  2. s-thief

  3. LelkaNe @ winner

  4. Dutch78

  5. rostikzh

  6. Rinstar



Attached Image


Competition1 BUTPRelI!

>Champion of our bar:<
Attached Image



Hot Barbecue Contest Wah!


Post has been editedDarkWelder58 - 03.06.19, 06:09
Reason for editing: Bulletin Board



Rep: (1628)
* Stealth3001,
join bro.
With the greatest day in OUR story, which some WITHOUT people want to forget and rewrite!
And all the peaceful sky over your head!
And whoever goes against us goes - that, we will mark so much that he will forget how his mother’s name is! : vinsent:
Happy holidays, friends! Hooray! : friends:



Rep: (1628)
* ANDREYMASTER09,
No, this is a pure flash driver.



Rep: (1628)
* Tihon5play,
Odin (Post yogurt_4462 # 78858633)and post below
and
Odin (Post by HRistose # 79091279)and post below



Rep: (1628)
I have a core of the world and swap works

You offer the user who asked the question above and received advice from you to use ram expander, to try all possible kernels and firmwares, in order to experimentally find out its working capacity? MiPa Kernel does not specify SWAP support, although it works. If you give advice, then give it completely, and not in such a way that "take this program here" (especially without reference to it), and then it turns out that you still need to flash the recovery, install the root and find the appropriate kernel and flash it for the ghostly possibility of reducing lags.



Rep: (1628)
* owez.sultan,
First, I do not need it. Secondly, where is the SWAP support declared in the specified kernel?



Rep: (1628)
* owez.sultan,
Why give advice for advice? Where can I get the core for this device with swap support? Roll back to custom firmware 2016?



Rep: (1628)
Oweez.sultan @ 03/21/19, 19:14*
ram expander to help

Seriously?
Roehsoft SWAPit RAM EXPANDER
Expansion of RAM at the expense of an external SD card.
For the operation of the program, you need root privileges + a kernel that supports swap, + BusyBox
Samsung devices use their own kernels and therefore this application will not be able to use the paging file. If you want to use it, flush the alternate core. For example CyanogenMod!



Rep: (1628)
DarkWelder58 @ 03/14/19, 19:21*
stop scaring Direchtur

I still did not understand anything. : girl_crazy:



Rep: (1628)
: ph34r:: ph34r:: ph34r:



Rep: (1628)
* Rostikzh,
http://qtube.site/watch.php?vid=031d9828b
https://teleportal.ua/...posna/sezon-1/seriya-2



Rep: (1628)
* DarkWelder58,
vedmed - a bird independent. : D



Rep: (1628)
Tuta, alive!

Not mulberry, but quite! ;)

S-robber @ 02/20/19, 01:32*
interned, took over the experience

I do not know from whom he gained experience in sneakers piss ...: russian_ru:



Rep: (1628)
the last curator, scared (did not attract / did not keep) individuals, of that sex

But-but! : girl_hospital:



Rep: (1628)
How much I did not try, at one time, to repeat this Hoganovsky technique with the "goat", nothing but the feeling that I was not an idiot.
Guaranteed to confirm - the method is working. Verified Approved. : secret:



Rep: (1628)
another way to put your call melody without root

Why is the root at all for this? Literally today: I downloaded a cool song - Settings - Sounds and vibrations - Ringtone. I chose the right melody in the right folder - that's it. No ruts, dances with a tambourine and other things are needed.



Rep: (1628)
* kgmotors
Odin (Post KodIHTIK # 38500745)



Rep: (1628)
* Neohunter
Graphic lock. Screen lock code - problem solving.



Rep: (1628)
It seems (unfortunately or fortunately, did not decide) that the time has come to ask the moderators to close this topic, because it turned into a branch of elementary school, sadly ... Just turned the topic into a collection of posts "about nothing." Flood for the sake of flooding is not interesting even in fludilke. This does not apply to all participants, of course.

Full version

Help     rules

Now: 04.08.19, 07:47