uklogin Well, perhaps for TVs it’s completely optimized for itself. I calmly watch 4K HDR subtitled releases. A couple of times I came across some ingenious codec that Plex started to convert and choke on the go, and it is also used as the main player of the home collection

bzz11g , And what are its advantages? Plex shell looks much more attractive

For a long time something new versions did not come out

alexmeo , it's better not to experiment with such things for the most part. I would find a store where there are different adapters and choose something.

From my own experience, I bought the cheapest adapter for Ali for the Pro 1 and it turned out that all the troubles were in my native gymnastics, which got worn out because I was wrapping the wire around the brick ... I unsoldered, found where it was buggy and I soldered everything as it should)

tridmaster
As I wrote a little higher, the problem with my device was not in the display at all, but in the cables, or rather in the connectors on the motherboard. They melted because of which my sensor was buggy, sometimes the screen flickered if pressed down and the keyboard stopped working. All problems were solved by forcibly turning off the sensor in the Manager, using a Bluetooth keyboard and a second monitor. In general, the tablet turned into a stationary computer) For an attempt to localize the problem, my giblets would have been enough, but they are unpresentable for sale, and sometimes I still use it) I think to make a home server out of it

tridmaster , No) I have a disassembled laptop with a non-working display, but in general, working the rest of the stuffing. He lies idle, can somehow reach his hands to repair

tridmaster , Eh, you have 11k, and I bought it at one time for 40)) I disassembled my own house, the screen remained intact, but the body melted slightly at the edges. If you were in Moscow, you could check

Post has been editedSenek - 21.04.19, 11:40

tridmaster First, try holding the button for a long time while charging. Well, all sorts of combinations like Power + VolUp if you give at least some signs of life are already good. And so maybe the battery ordered to live long

7nasa4 , Well, if in the Dispatcher everything is without question marks, then most likely it is with a stylus cable. When replacing it, it also appears there and can be interrupted. The stylus works separately from the finger hatch, so that the screen response to the finger does not guarantee that the stylus will work

Mukch2,
I also got caught. I advise you to put in Chrome Vysor and if the computer and the TV are on the same subnet, then you can see the screen through Vysor. It is only necessary to allow ADB

vladimirbaykov76,
Many here had problems with the flash drives themselves. Perhaps you also have
I have on the latest firmware, TV did not go to TWRP but to stock Recovery
If you don’t go there either - something is wrong

But I was faced with the fact that I can not free up space under Gapps ...
Already deleted everything seems to be possibly interfering: the apps folder just got in ...

There is a system / vendor folder which takes about 400MB
There are some apk-shki lying in it in a huge amount
Either my removal actions do not work, or 4S is so cropped
Tell me that you can kill more so as not to nail everything.
I can fonts Chinese, but it will free ~ 40, but another 150 is needed ...

vladimirbaykov76 ,
I have not loaded TWRP above 744 (4S)

I tried to find the responsible Changelog for the assembly, but could not find it. Based on reviews from this thread, there are three main differences: support for the English language; reduced latency when playing HDR content and visual changes in the UI.

I’ll add that I launched Plex yesterday with the HDR Blade Runner 2049 on the stock firmware (like the 74th, Build 349), and the picture looked completely different than on build 744. On the last, it’s better, but on the drain the orange color turned already red, and as if there were some problems with the range ...

afreet r.gilmetdinov,
Thanks for the tip from Vysor. I was able to connect remotely to the screen, I got to these settings, changed it - nothing has changed.
From some third attempt, picking through Vysor decided to try logging out to TWRP and, lo and behold, the screen turned on.
Most likely, these settings apply only after a reboot.
One way or another, I would add this incident to the gapps manual.

Do not change Screen Resolution in the stock settings, but it’s better not to go into them at all

Post has been editedSenek - 24.03.19, 14:38

merc_cooper Tell me, a team?

MogikAn777 , Yes, but I do not even have the mi logo when I turn it on. Well, in the recovery, I also feel unlikely to reach all points. Strange thing of course

Oh, it seems I broke something. The devil pulled me to go to New Stock Settings and there was a Screen Resolution set to 1080. I decided to put 4k, and the screen went blank ... Reboot, turn on, turn off - no changes ... The adb telly is displayed. Is there a chance to return everything?)

klez
The same story. Now I'm looking for the latest build, on which the 4S 55 'will see TWRP.
1055 and 971 are already in flight, now I try at 744

UPD:

Build 744, he also sees 98d TWRP
So, the campaign for this version of TWRP for 4S xmen is an extreme build

Post has been editedSenek - 23.03.19, 23:45

info2 , And what is your regime? In duplication mode, most likely it will be, because in Syur the ratio from the monitor is different. But in the extension mode, you can set a suitable resolution. I connected via miniDP-VGA - there were no problems.

By the way, thanks to the adapter and the bluetooth mouse and clave, Syur with the dead display and a second life appeared. Works fine)

I’ll add a little from myself.
Configured Mute to the voice search button.
For this:

1. First, delete the application, which is launched by the button and forever saysI'm sorry I can't hear what you've said
   We connect via adb to the TV. How - lookhere
   Enter the command:
   
   adb shell pm uninstall --user 0 com.xiaomi.voicecontrol
   
   Waiting forSuccess in adb, we can close.
   
2. Opening Buttons remapper
   
3. In the key selection window we go to the very end, select Other
   
4. Click on the desired button. If the application with the Chinese assistant is deleted, then when you click nothing will come out. The button is defined as Key_0
   
5. Assign Sound Off application to a key
   
6. : dirol:
   

UPDATE (02/10/19):
I must note that the Sound Off program is unstable with some applications. In Plex it works fine, in RT-TV the application pauses playback ... Keep this in mind and, perhaps, over time there will be a more convenient option

Post has been editedSenek - 10.02.19, 15:53

In my opinion, you can go to the Wacom website, and there were some other models written in the drivers for our pen