Good evening. On the device there is a stock firmware Android 7, routine. There was a question: how to control the frequency of the processor? I want to lower, but C3 Tools, for example, could not do it - the values ​​immediately come back. I tried one of the cores in the topic of flashing - catching a bootlap. Advise that you need to roll in order to gain access to the settings of the CPU.

Apd Found Kernel Auditor, he did everything as it should, on the stock core.

Post has been editedRudzil - 04.05.19, 22:32

ennenn
Duc lol, the problem was that it was impossible to register it in principle!

Rudzil
Problem solved. The activation curve of the SIM card is to blame: after meeting with another phone, she started working in it, and after switching to M8, she set up the Internet. But all this is still a game, to be honest.

quny,
Alas,
did not help. Some other methods did not help either (everything that does not require root ...).
such a blizzard: there is a network, calls and SMS, but there is no Internet. Add fails - after adding is not saved and that's it.

Frankly, I am amazed to be incredibly and absolutely deprived of ideas what to do next: even if a complete reset, another sim card and the rolling of OTA did not help!



Post has been editedRudzil - 15.03.19, 23:53

Good evening. They asked to find out how to solve the problem on the device with the native official English language version updated by OTA (apparently not a PCT phone, I suspect Asia WWE) firmware: everything was OK, but at one point they changed the SIM card. And the nivkakuyu could not configure the Internet: writes, "access point settings for this user are not available" - when trying to manually configure the APN. Configure something like gives, but does not save the profile APN (in the list does not appear, there is only the above inscription). Reset to the factory tried.
Doesn't it happen in the world so that something depends on Sims at all? How to overcome it?

Post has been editedRudzil - 14.03.19, 23:45

There is a necropost question: is it possible to flash 2.00.405.3 (2.3.3) with a root and s-off core from a droid firmware (2.3.4)?

And then I do not know what is not completed. There is firmware, no feedback. I fixed it. Everything.
Froyo is extremely poor in compatibility, 4.2 ibt didn’t like it - performance and non-issue problems. While the QC was stuck again for the time of Taiyung, the brakes and non-gum were able to be defeated by cutting out everything. But it is better for convenience and beauty than 2.3 with the sensor has not yet been invented.

Here is another good firmware with Sense 2.1, Android 2.3.3, by haldric (XDA:https: //forum.xda-deve…wthread.php? t = 1333106)
I made it easier by throwing out all kinds of garbage, ringtones, gapps and some freaks (-90mb). Now she works on a European with a 5/180/5 installation in nand completely (select the TMOUS device in the dialog box when installing). A lot of free RAM, impressive performance. Memory is enough to install applications, if you use Titanium App2sd. It works better (in terms of performance) than Mikheyevskaya (and much older).
https://yadi.sk/d/YCagTxZA3YLNVz- Link to lightweight firmware.
The full version is also not available for download on the XDA, but, fortunately, is in my reserves:https://yadi.sk/d/Vjp23Z3H3YLQFU

For the sake of interest, I installed the firmware from Sense 4 on the third core with XDA. In short, it works well, but it did not connect to the Internet, and the consumption in a dream according to the classics - 50 mA in hibernation, the battery sits at night to zero. Here is an interesting core.

Perekleil screen him) Glass Ali took) Get it!
Now I can add one more. When configuring Yandex mail via the pop-up reboot field, the mail wasn’t getting new — hangs on “search for changes”, and at the same moment the Filesys.exe processor starts to load abruptly. Lags, and in hibernation - nepolyply. Migrated to IMAP - like while it works. Only in manila - cracking and fix did not help.

Good evening. I would like to know from experts 4.x buckets, how in it (namely in IBDroid 4.2) can the frequency of the processor be set separately in hibernation and in wakefulness? The processor management manager integrated into the CM does not allow a niche to install DaemonController and andrev_oc. It’s very annoying for me to wake up the device for a long time - it is very large compared to 2.3 + Sense (marc1706 cores) ... Do not raise the minimum frequency to 384!

Has anyone stayed in stocks?

Good evening! Does WM have a working way to use a proxy server to direct all traffic through it? Well, or something like a torus client ...

It seems I solved my problem:Asus K501UX - Discussion (Post by Rudzil # 71644987)
The solution was written here:https: //answers.micros...4e42-aa1f-310b98d374fa
As you can see, the problem is common to a whole range of laptops, and it appears after the upgrade to W10.
In general, in my case, the problem was solved (I hope that forever) by the third option, described on the M $ forum: you need to turn off the laptop by forcibly pressing the shutdown button for a long time. Then remove the cover and disconnect the white battery connector from the motherboard. So hold for 15 minutes. Then connect back and connect the charger. The laptop will turn on. Cut it out, charging to the maximum. Replace the cover.

After this manipulation, the problem seems to have disappeared from me - there are no problems with loading from hibernation and normal sleep, the laptop has not yet been cut off spontaneously while working on the battery, although yesterday I caught 95% charge five times in a row ... I hope everything will be in order. Be careful when installing updates - it may be better to refrain.
Yes, and also - if the laptop is not turned off forcibly during the glitch treatment procedure, then nothing works because of the fact that it goes into fastboot mode instead of completely shutting down. Verified


Update:
Not all bullshit started again. Shit. Yesterday I drove - everything was ok, today everything is as before.

Post has been editedRudzil - 27.03.18, 14:22

edward1991,
and so the last ...

Post has been editedRudzil - 25.03.18, 00:52

Good time of day. I own a K501LX laptop, which is not much different from the UX. Faced a problem that more than one person described here.
The laptop after going to sleep does not turn on the first time - it may not turn on from the tenth. At the same time, it charges without problems, i.e. indication is working. At the time of non-inclusion, the indicator of the light bulb lights up for a second and the aircraft indicator blinks. After that, both go out. A long press leads to the repetition of the observed several times in a row. Inclusion successful - random and there is no logic in it.
Another problem is spontaneous shutdown. Just at the moment of working at normal temperature, the sensors suddenly the screen goes off and the device turns off tightly. As if the power button was squeezed and forcibly cut down.
Winda 1709, the latest drivers from the asus site are installed, the BIOS has been updated to the latest version from the site.
The motherboard has already been changed due to a malfunction of the RAM controller.
I do not want a second time vbuhivat so much, zadolbalo. Perhaps someone will let anyone know how they solved this problem?

What do you want?

If the native WM does not work, most likely, the problem is hardware.

Posted 10/03/2018 at 17:38:

The drivers for the mugldr seem these, ANDROVAZ


USB_drivers.zip(28.77 KB)
drvupdate-amd64.exe(12.45 MB)

Only there is a suspicion that he still does not use the UHS speed bus.

romarov04,
It is possible that the matter is in the appropriateness of using a swap for different firmware. If Alio puts Nugu on HD2, then there’s really no choice, swap is a lesser evil than wild lack of RAM. And on the old 4.x and, moreover, 2.x swap, the nafig is not needed and can actually slow down the work.
As for large programs, because of the race permits, in my opinion. If each android distribution contains resources for tons of different ppi, then it is clear that it will be bold and the program itself will also be difficult (well, I’m not an expert and do not pretend to be 100% fair). IMHO, it is possible that there is some sense of optimization for our hdpi of all software in the system and software installed by the user ... Throw out unnecessary resources, harden the resources you need ... But this is still the hemorrhoids.
Once on WM, I did this and won the precious meters - but it was much easier there.

Post has been editedRudzil - 10.02.18, 19:02