For more than a year, I use the handset to answer one handhttps://aliexpress.ru/...311.0.0.264d33edtdfq1d.. Occasionally, especially in the car. True, I had to remake a lot. Changed the twisted cable on a straight line, instead of a telephone capsession put a sound head from headphones that are used, for example, for Skype conversations. Then I excluded the diagram inside the tube, left only the button. The volume of the conversation is adjusted to the volume on the smartphone. The beginning and end of the conversation with the button.

Hello!
I break between two gadgets: Xiaomi Redmi 7A 3/32 and Meizu Note 8 4/64.
Selection criterion: minimal impact on the eyes.
Ali are written to Ali that 7a has UV protection. And in N8 applies the IGZO matrix. Information about the impact of such a matrix did not find the eye. Well. I think there are due attention to these issues, worse than IPS could not do.
In the old smartphone there is an IPS matrix, 10 - 15 minutes the edge, then the eyes are discomfort. The brightness is set percent by 30.
I would like to hear feedback from smartphone owners with IGZO matrix and 7a owners.

See what the Chinese thought up:

https://aliexpress.ru/...2_7,searchweb201603_53

Buy your smartphoneBlack View A8 loop: the connector and 3 buttons (+ volume - the volume, power).
Am St. Petersburg / Vyborg. Please PM.

I read. There is no comparative estimate there.



As not strange, I like the left shift.
For the purity of the experiment, I would like to see the picture taken by 13 MP camera. And to the right the same plot made by 12 MP camera.

What is the camera better, at 13 mp in the phone with a global firmware or 12 megapixel in the phone with a global version? Something option with 13 MP camera is not considered at all and is not discussed. And there are no pictures either. I want to order a phone 3 + 32, but in it just worth this camera at 13 megapixel.

.PR.,
if you can get there, try to distort a couple of times a loop matrix.

.PR.,
The matrix can be excluded. Try now to make Hard Reset using the buttons. Click simultaneously "Home", "On" and "Volume -" and hold until "Recovery Mode" appears. Select Hard Reset, confirm the Home button.

.PR.,
Try at such a moment to press your fingers on the top of the matrix.

Asassin707,
Metering tester or multimeter headphone resistance. It gb about 30 ohms. If more - the sound will be quieter. If it is less - the sound will be louder.

Gila357,
I managed to defeat the virus in the smartphone. He flew to me every morning at the same time, in the same SD card folder>Download. His name is the same, long name, 32 characters: EA0CC142E8A7A098DB5F6D014CF12486.apk. Weight of about 180 kb. If I'm not mistaken, it is a Trojan. If it does not touch him, then he also loaded a couple of viruses. One, too, with a long name, about 5.5 MB and another Android.Ignore.Service.com, this one was installed in the phone's memory.
I put myself an antivirus Security Master, he began to block the work of this Trojan. And then in the folder SD card>Download I created an empty folder with his name. He flew, and it turned out that there was "already" this virus, and he was not installed. Then the antivirus became this empty folder to delete, took it for the garbage. Well, I created such a folder again and for the ballast a couple of pictures threw there. Already not a normal flight!
This Trojan changed brightness with her accomplices, disconnected the sound from the bell, turned on the flash. Consited about 1.5 GB of memory, somewhere in the abyss flew away. Now everything restored. Password from Yandex-Mail brushed. Then from Yandex received a letter about suspicious activity. I started checking, I look at my mail from Victoria (Seychelles), that's what you watched:
Device: MI 4C
Victoria
IP 41.223.216.206
Access to data
Yandex.Disk REST API
Access to the disk application folder
Reading the entire disk
Record anywhere on the disk
Mobile Yandex applications
Access to the user's personal data on Yandex services from mobile applications
Yandex Mail
Access to Yandex.poche
Yandex.Disk WebDav API
Access to Yandex.Disk for applications
And after a couple of days, from another place included, the staff of Atlanta, the USA, that's what:
Mobile device
Device: iPhone
Atlanta
IP 45.79.201.195
Access to data
OAuth
Issuance of new oauth-tokens

I made a password more complicated until all the rules.

Gila357,

Look, on the memory card there are files with a very long name?

Look at your browser Lmuch.com bookmarks, you also delete.

Recommendhttps: //www.youtube.co...h? v = bcnh8lqmeom & t = 176s

A week ago, I was lying, the flight is normal! Firmware Brallhere, for Central Europe, on September 9. There is no advertising and memory does not disappear anywhere!

Exidio,

I advise you to read the previous message. Your item 2.5.

Athlete79,

Your item 2.2.
Go to the engineering menu (dial the combination on the phone panel) * # * # 3646633 # * # *
Go to the AUDIO. Drop down the list:

1.1. Normal Mode (Normal Mode)
1.2. Headset Mode
1.3. LoudSpeaker Mode - setting the loudspeaker mode (the same Handfree mode?)
1.4. Speech Enhancement (Speech Enhancement)
1.5. Debug Info (Debug Info)
1.6. Speech Logger (Logging conversations, apparently).
1.7. Audio logger is an audio logger (software for recording audio) with the ability to quickly search, play and save.
2. Select the desired mode.
Normal Mode, (if you want to increase the volume of the earpiece and microphone).
You will see a menu with four positions, where the first item is the profile number.
*** NO FIR Selected ***
The list in the drop-down menu:
FIR 0 ~ 5
Type
2.1. Sip Tone (?)
2.2. Microphone (Microphone Volume)
2.3. Speech (Speaker volume)
2.4. Side Tone (?)
2.5. Media (Multimedia Volume)
Level 0 ~ 6
Value is 0 ~ 255 (0 ~ 160)
Max Vol. 0 ~ 160
We leave FIR 0 and do not touch it. We go below in the following parameters.
First, set up a general volume modulation.
Select Type: Media
then below in the Max Vol section. 0 ~ 160 set the volume to 160 and click Set.
Next, select the Vol parameter values ​​for speaker volume.
Select Type: Sph
Next will be the Level list - these are the signal levels. What would be clear - there are 7 levels, and each corresponds to one “click” of the volume rocker, which is on the side of the phone. When you get rid of this rocker when talking, you essentially iterate through these signal levels. Those. Level 0 is the quietest position of the rocker, Level 6 is the loudest.
The volume level value for each Level is in the Value is (0 ~ 160) cell:
It is necessary to change. Changing is simple - erase the old value, enter the new one and press the Set button (next to the cell).
Warning! Write down the factory numbers before changing!
Level 0 - 90 Set
Level 1 - 100 Set
Level 2 - 110 Set
Level 3 - 120 Set
Level 4 - 130 Set
Level 5 - 140 Set
Level 6 - 160 Set
Max Vol values. 0 ~ 160 we have already changed earlier.

I was interested in "for this you need to do the root?"
If it is not necessary to do this through FlashTool, then write, I don't know these subtleties, so I ask. I also have y 813.

FURER666,

You have not answered the question.

Post has been editedPoiskman - 25.12.16, 11:37

To do this, need to do root? The instructions on the Needroma website is not mentioned.