Rep: (229)
* Cool_pigeon, possible options
  • disable the file transfer mode: tap on the icon in the system tray to connect the reader - connect usb - MTP mode; then: Settings - System - work with memory - three menu points - usb-connection to a computer - media MTP device
  • established the conflicting driver (unlikely) - try to connect to another computer; remove the driver using Driver Assistant (can be taken from caps[TOOL] rkDumper (RedScorpio # 35189093 Post) )
  • Iron problem: try another cable / port / computer / Check for errors in Device Manager



Rep: (229)
* vVv_Gomel, randomly fail, unfortunately



Rep: (229)
Each update of Windows - like the lottery. When installing begins to blunt, to hang out with a white screen, then black - in this case the mouse cursor on a blank screen runs without lag, the tablet responds immediately to enable / disable the keyboard. But the update can last for hours and are often the result - the inability to boot, we have to re-install. What it could be: overheating (slightly warm, but I would not say that critically, and is more at work), broken memory (tested - no errors are found), or something else?

Added by:
in the internal memory free 11gb

Post has been editedOptom - 15.09.19, 21:50



Rep: (229)
txt2t @ 11.09.19, 21:36*
instruments provided for rollback. You need only update file
those. roll back to an older firmware update and then to the right of the May?



Rep: (229)
* txt2t, you can always request to tech support http://onyx-boox.ru/contact
If we are to rollback to a previous version, the update will not be enough. It is necessary to request full firmware and sewn from a computer



Rep: (229)
DiscussionOnyx Boox Darwin and modifications
C67ML Carta Series: Carta, Carta2, Carta +, Carta2 +, Darwin, Darwin 2, Darwin 3, Darwin 4, Magellan 3,Vasco da Gama пїЅ, Vasco da Gama 2, Dontsova Book
Description | Discussion пїЅ | Firmware пїЅ | Testing beta versions of firmware пїЅ | Common questions - Owners Club пїЅ

Attached Image
A photo
photo from the official website of the manufacturerhttp://www.boox.com/and distributorhttps://onyx-boox.ru/
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Technical characteristics of past generations
General data for the entire lineup with a brief indication of the differences.
Display: 6 ", E Ink Carta, 16 shades of gray, 14: 1 contrast
Touch screen: capacitive with multi-touch function
Resolution:
- 758 Г— 1024 for Darwin 1/3
- 1072 Г— 1448 for Darwin 2/4
Snow Field feature: Darwin 3.4
Backlight: MOON Light; 5 or 8 diodes
Processor: 2-core, 1 GHz
RAM: 512 MB
Built-in memory: 8 GB (first revisions Magellan 3 - 4 GB)
Expansion slot: For microSD / microSDHC memory cards
Sound: there is no hardware support in the models of the McCenter - the exclusive distributor in the Republic of Belarus, the Russian Federation, the USA, Ukraine (a series of travelers); through headphones in readers for other countries (C67ML Carta series)
Wired interface: USB 2.0
Supported file formats: Text: TXT, HTML, RTF, FB2, FB2.zip, FB3, MOBI, CHM, PDB, DOC, DOCX, PRC, EPUB
Graphic: JPG, PNG, GIF, BMP
Other: PDF, DjVu, CBR
Wireless interface: Wi-Fi IEEE 802.11 b / g / n;
Battery: Lithium-Ion, 3000 mAh capacity (previous revisions - 1700 mAh)
Operating system: Android 4.2.2
Dimensions: 170 Г— 117 Г— 8.7 mm
Body color: Black, gray, white, brown, blue (different color sets are available for different modifications)
Weight: 182 g (previous revisions - 169 g)
Equipment:
all modifications: e-book, USB-cable, user manual, warranty card;
additionally Darwin, but not Magellan 3 / Vasco da Gama: smart cover case, 220 V power adapter

F.A.Q. (first 150 pages of the topic in 80 questions and answers)
mini-FAQ TOP-10 topical issues
  1. Differences of different modifications : РЎarta 1-2, Carta + / 2 +, Darwin 1-6, Dontsova, Magellan 3, Vasco da Gama 1-3 - in the FAQ .
  2. UP! "Cullet" - broken screen - non-warranty case - in the FAQ
    To search screen marking for the replacement of the broken - it is better to seek the screen marked by serial number in readertechnical support MakTsentrbutit may not be so easy.
    UPD: Reportedly , Replacing the screen on the first line of models in the official service can not - no longer supported!
  3. To the right of the clock in the system panel appeared button-indicator [<>], when pressed, changes to [+ -] : switch the mode of operation of the physical side buttons page turning - volume control appeared in firmware 1.7.0 - including, to ensure compatibility with third-party reader applications that can flip through the volume buttons, but do not understand commands PAGE_UP / PAGE_DOWN (fbreader, kindle and others); the indicator was hidden on readers without audio output up to firmware 1.8.3-mc, but accumulated Problems and developers did not find another solution how to stop hiding it
  4. What is and how does the snow field work: in the FAQ and in discussion from 143 pages
  5. Normal running time for a 3000mAh battery according to the distributor: 25 hours of reading with occasional use of the backlight, without using Wi-Fi or about 2 weeks of continuous sleep without using a device . Many complaints from the owners : The battery indicator shows an uneven discharge; in fact, the reader lives after charging only a few days; to slightly extend the battery life you have to turn off the device after each reading (turning on takes>30sec); autonomy decreases markedly when using the backlight and decreases sharply (to "telephone") when you turn on WiFi; self-discharge is noticeable in the off state; Slightly more .
  6. Up!Hide the black status bar with the clock - in OReader switch to full-screen mode (1) tap on the upper center of the text - "full screen" or (2) settings - basic - start in full screen. For other applications
  7. Replacing regular screensavers: In the regular file manager, a long tap on the file with your picture - set as a screen saver for the sleeper - the N sleep screen / device off screen. Read more
  8. My fonts : for standard reader programs, place in the "fonts" folder in the root of the internal memory - create if there is none ( A little more in the FAQ )
  9. Not enough memory to install applications: manufacturer's decision
  10. Read pdf / djvu: (not) is convenient as well as on other readers 6 ". Which application is better to open pdf / djvu
Known bugs and features - TOP-5
  1. Up!On the reader without sound support, when you press the paging buttons, a volume control appears
    On firmware: 1.7.5-mc - 1.8.2-mc.Bypass. Resolved in 1.8.3-mc
    Special case: a crossed-out speaker appeared in the system status panel - the muted icon.Quick workaround
  2. Some installed applications do not work.
    Applications do not work "in the background"; when selecting an application for opening a book / file, the installed applications are not listed; The applications are disabled and run only by a shortcut from the list of applications. At the same time, the launch message first appears - this is how the new energy-saving "reader mode" from Onyx Boox developers works
    On firmware: 1.8.2-mc-test 2018-02 ... The ability to disable the so-called "reader mode" and switch to "tablet mode" appeared in later beta firmware 1.8.2-mc-test 2018-03 .. in settings: power management - enable third-party services and applications - reboot
  3. Problems in the shell of the book when using AlReader:
    AlReader does not update the last open book on the start screen; does not appear in the selection menu as a program for opening fb2; after opening a book file in AlReader, its cover is no longer displayed on the main screen, and the file disappears from the library and other manifestations of incomplete compatibility of AlReader with the changing Onyx Boox SDK
    On firmware: 1.7.5-mc-1.8.3 Conflict AlReader and OReader when updating the database of readable books. Workaround: (1) use the current version of AlReader and its built-in capabilities without integration with the Onyx shell or (2) reset the settings, use only AlReader, enable interaction with the Onyx desktop in its settings, and never run OReader or (3) orupdate OReaderto the latest version - starting from 1.73, many settings from AlReader have been added (returned) to the application. Comments in the topic AlReader:-1-, -2- -3-; -4-
  4. The regular library does not index zip archives (for example, .fb2.zip books)
    On firmware: 1.8.0-1.8.2. Bypass:1, 2. Reportedly resolved in current -mc firmware
  5. The clock in the system status bar shows the reader’s activation time and is not updated.
    On the firmware: 1.8.2 – mc 2017-12-28. Not to be confused with normal behavior (the clock is updated only when the screen is active); in this case, a reboot is required for the update. Not yet decided.
  6. Auto-shutdown settings are reset after reboot to "manual"
    On firmware: 1.8.2-mc. Reportedly resolved in firmware 1.8.2 – mc 2017-12-28
  7. Smart coverstableputs the reader into sleep mode from the second time: the cover must be closed, opened, then closed again
    On firmware: 1.8.2-mc - ??? Not to be confused with normal behavior (the reader may fall asleep when you open the cover) or hardware problems (the cover does not work at all, or it works, it does not). Should be decided in later firmware.
Other
For brevity, details are omitted. Bugs can occur only in specific conditions.
  • New readers with support for Snow Field in the settings of the pre-installed OReader do not have the Snow Field option (in the General section)
    On firmware: 1.8.1-mc. Bypass -update OReader. Resolved in new installments
  • Do not install custom sleep screensavers
    On firmware: 1.8.2-mc. Bypass, depending on the cause: (1) use regular, not alternativeway to install images; (2) before updating the firmware, flash the image with a new markup from the computer - an increased space for system and user applications (in the FAQ); (3) try another firmware
  • Book covers are not displayed.
    On firmware: 1.8.0-1.8.2. Workaround - (problem fb2.zip support) -1, 2. Not yet decided.
    On firmware: 1.8.2-mc. Bypass - before upgrading, flash the firmware with the new markup (in the FAQ). Not yet decided.
  • When rescanning a full-time library, it closes with an error
    On firmware: 1.8.2-mc. Workaround - roll back to the previous version. Not yet decided.
  • Unable to install / update FBReader. the system is pre-modified
    On firmware: 1.6.x - 1.8.1. Bypass -in the FAQ. Mod FBReader excluded from firmware 1.8.2 (1.8.1-mc)
  • Books with DRM do not open, DRM item disappeared in settings
    On firmware: 1.8.1-mc-1.8.2. Bypass -install the first version of the Onyx Neo Reader. Resolved in 1.8.2 (later versions)
  • Despite the installation of a custom screensaver in sleep mode, the first one still displays the system
    On firmware: 1.7.5.Bypass. Resolved in 1.7.5 (later versions)
  • In regular applications, it is impossible to create a new Google account.
    On firmware: 1.7.2-mc-1.7.5-mcBypass. Resolved in 1.7.5-mc (later versions)
Useful and different


Readers of the C68 line are discussed in another topic:
ONYX BOOX C68 - Darwin 6 / Darwin 5 / Vasco da Gama 3 Discussion / My first book

Past Survey Results
2018 Survey on the overall assessment of the quality of the hardware component of c67ml carta readers
Attached Image

05.2017-09.2017 Survey after the appearance of the Snow Field technology regarding the dispute: whether everyone notices traces of past images when scrolling WITHOUT Snow Field - accordingly, how much this new technology is needed, which reduces artifacts
Attached Image

07.2015-09.2017 Survey from* FOV5 in the subject Onyx Boox C67ML - Firmware about the discussion about the desirability of increasing battery capacity - from mid-2016, the manufacturer increased the battery capacity from 1700 mAh to 3000 mAh!
Attached Image
History of changes caps
11/09/19 Notice of termination of the support in the mini-FAQ
07/05/19 Survey on autonomy, paraphrased a little about autonomy in mini-faq, added a pro speaker icon to bugs and features, double-checked links
12/21/18 Closed a survey on quality
12.12.18 Discussion of the C68 series was moved to a separate topic, lost old photos, added new different ones for cat
11/25/18 Gradually update the cap for a new generation
09/16/18 a question was added to the mini-faq on the mode switch of the physical buttons, the known bugs were slightly updated, the question about the defect from the mini-faq was moved to the useful
07/04/18 utilities for adjusting VCOM are added to miscellaneous
06/09/18 added a bug with the triggering of the cover only the second time
03/04/18 feature with auto-freezing applications in beta firmware versions - added to bugs
02/16/18 Calibration of the battery in different
01/23/18 minor changes
01/16/18 Added links to modding from* pulsar_85
01/14/18 Added marked bugs of firmware 1.8.2 – mc 2017-12-28
01/11/18 Added "message board", collapsed bugs,added spoiler "useful", which will be added links to posts from the topic, applications are transferred to the cropper
12/15/17 Announced Darwin 5 has been added to the list of devices under discussion. The firmware block has been moved to the firmware theme.
09/22/17 A problem with displaying covers after opening in AlReader has been added to the list of bugs
09/17/17 New survey
08/23/17 Firmware block
07.28.17 Top 3 bugs rendered from under spoiler, link to VdG topic
07/09/17 Spoiler with bugs and features
07/05/17 The picture is smaller; corrected links
06/03/17 Marketing description under the picture; disclaimer disclaimer for various modifications
.05.17 A complete list of modifications above the picture; warning about the absence of complete firmware for recovery; reference to the generated list of applications; Link to differences Darwin and Magellan 3 moved to the FAQ; refined specifications, mini-FAQ, history of changes in the caps; poll; mention of carta and "other modifications" in title
05.05.17 FAQ
a photo
Attached Image


Post has been editedOptom - 11.09.19, 19:19
Reason for editing: See change history



Rep: (229)
* cliperson, thank you for message. Take to the cap in the mini-faq

Post has been editedOptom - 11.09.19, 19:05



Rep: (229)
* Chestnut, there are two built-reader, switching standard - long hold, open with, select and assign the default application when needed. The Neo Reader 2, as I remember, did not change the button quick tabs in the upper left corner - and it is really small. In OReader "corner" more bookmarks (bookmarks on the Help for the program: http: //www.alreader.co...derHelp.html#bookmarks ) And can be assigned to any of the tap-zones ( http://www.alreader.com/AlReaderHelp.html#tap ) Action "Quick Tab", for example, the complete sequence:
desired file format book (file settings are saved on the format) - a long tap - tick Set as default - OReader - tap in the center to display the interface - gear settings - tap zones, gestures and buttons - action for short tapov - top right - Quick tab = while the entire upper right tap zone will be responsible for adding bookmarks (but to cancel this tab will still have to get on the corner)

Posted on 09/02/2019, 23:02:

I actively use bookmarks in OReader and from my experience will warn: bookmarks are deleted if the book file to rename or move; Bookmark and deleted when you reset the settings (user data) reader
Bookmarks are stored (along with information about the favorites and OPDS) file favorAR.db in AlReader directory at the path specified for the memory card. This file (SQLite database) contains the path to the books, so simply copying the file to another device does not work to transfer bookmarks and favorites, if there are ways to books will be others.


Post has been editedOptom - 02.09.19, 23:03



Rep: (229)
* alvaba,
ONYX Russia @ 10.02.18, 16:28 *
change - cheaper
XD

Added by:
okay, ;)
in a fit of procrastination I coached more quotes on the subject matter:
ONYX Russia @ 05.05.17, 23:00*
I would advise to book screen in the official service:https://onyx-boox.ru/service
We have recorded a lot of complaints from people who ordered a screen somewhere "on the side", alone changed it - and the result is a pale image issues, and how to improve the contrast of the screen something yellow, etc.

<...>

Keep in mind that:
- at the same labeling may be different manufacturers illumination,
- at the same labeling screens can be different VCOM,
- in some cases, the screen on the VCOM is not tested,
- in some cases on ebay / aliexpress sell a deliberate rejection,
- there are several categories of quality near the PVI (grade A, B, etc.), and the lower price and more attractive offer, the most likely below grade.

To learn how, ideally made replacement screen, a professional from the service (not ours) are briefly described here:http: //www.the-ebook.o...87b510356441c2#1318278
ONYX Russia @ 19.08.17, 21:17*
It is best to apply for it to the service center, but there are no screens for all models (for some relatively old anymore):https://onyx-boox.ru/service
If the screen is available, it (if necessary) may be sent by mail.

In some cases, the replacement screen, so to speak, is not economically sensible. If you decide to buy a new Onyx, please send me a personal message - we can give you a discount as a regular user.
ONYX Russia @ 10.02.18, 16:28*
Replacing the screen on the Onyx Boox Vasco da Gama 2 costs 4,500 rubles. Terms of repair in our service center - 2-4 working days. service coordinates:https://onyx-boox.ru/service

Cullet really is non-warranty case. Basically, if you believe that it was due to marriage / defect, you can contact an independent examination - if it will show that this was so, the screen should be replaced free of charge and to compensate for the cost of the examination.
ONYX Russia @ 01.05.18, 23:50*
in the Russian service in Moscow the replacement screen on Vasco da Gama 2 and 3 Darwin worth 4500 rubles (more precisely, more recently, cost, and maybe the price has changed, if you're interested - please specify). If necessary, the screen can be sent by mail, in this case, will be deducted the cost of replacement, but will add the shipping cost.


Post has been editedOptom - 02.09.19, 20:15



Rep: (229)
Applications for e-books on the Android operating system (part 3)
Blog MakTsentr, Testing Mobile Application, Reading room, Gadgets
In this (third) part of the article about applications for e-books on the Android operating system, the following two application groups will be considered:
1. Alternative dictionaries
2. Notes, diaries, planners

In this part of the review of applications is something completely absurd IMHO. Even with the
ONYX Russia @ 21.08.19, 16:29*
The task was to check on start-up and the ability to work. A full description of all testing was not functions.

... among tested on orders MakTsentr twenty dictionaries are no (!) Of the number of supported ORiderom
ВЇ \ _ (гѓ„) _ / ВЇ
and to whom such a review is needed of applications?

Post has been editedOptom - 28.08.19, 19:51



Rep: (229)
* eda100, no shared like. I did not ask for, because It can be sewn and 1.7.5 upgrade to 1.8.2.
Cutting comments ONYX Russia
ONYX Russia @ 03.03.17, 23:48*
I advise you to contact the tech support -https://onyx-boox.ru/contact- there can give the so-called restoring the firmware, which often decides weird glitches. It is even possible to install just restoring the firmware and should start ...
ONYX Russia @ 06.06.17, 22:45*
It is set to put it mildly, a rather complicated way (in terms of the average user), so we do not lay it on the website and provide a link to it on request (along with detailed instructions).
ONYX Russia @ 22.10.17, 23:00*
EndiDi @ 01.04.17, 11:50*
Help Desk kicked off version 1.42e FactoryTool instructions
FactoryTools.zip(26.69 MB)
ONYX Russia @ 13.03.18, 01:01*
Support may issue more new firmware
ONYX Russia @ 10.02.17, 23:44*
if desired, of course, you can request and put it here :)
ONYX Russia @ 03.03.17, 23:48*
Well, if she does not help, then it is necessary to contact the service:https://onyx-boox.ru/service

Recent unpublished full of "reducing" firmware:
It is useful to repeat:
  • Reader Model contains on the back side of the device (under a cover, if present), as well as settings: home-menu-about-about device-model number
  • The images are intended for firmware from your computer; when the firmware is determined by model identifier, and after casting a new image of the firmware update (update.zip) will be approached on the basis of a new model identifier
  • When flashing a complete image of all the data from the reader deleted - Back up your files
  • Firmware image from your computer - completely safe procedure, but to be able to quickly recover the reader, if suddenly something goes wrong -it is better be sure to make a backup of the firmware via rkDumper. Instructions for removing the dump in different variations:(0), (1), (2), (3).
  • Do not experiment without the need, if you do not know how you will restore the reader in case of errors!
C67ML
  • C67ML 1.8.1 20170213 8b8a18b ROM
  • Magellan 2 1.6.5-mc 20,141,126 7b15a90 ROM (old layout)
  • Magellan 2 1.6.5-mc 20,141,126 7b15a90UNAUTHORIZED ROM (new layoutWhen editing a little changedthe procedureNot tested)
C67ML Carta
  • C67ML Carta 1.8.1 2017-02-07 9d236b5 ROM
  • Darwin 1.7.5-mc-DARWIN 2017-03-16 a534ce0 ROM
  • Darwin 1.8.2-mc-darwin 20,170,609 78b5f1a ROM (a relatively stable version,firmware-Frankenstein =) there are parts, including graphics, from Vasco da Gama)
  • Darwin 1.8.2-mc-darwin 2017-09-07 1860da0 ROM (noted various bugs)
  • Magellan 3 1.7.5-mc 2017-03-16_17-41 8,630,421 ROM
  • Vasco da Gama 1.7.5-mc 2016-12-29 6e9a90d ROM
  • Vasco da Gama 1.8.2-mc 20,170,621 s726u34 ROM
  • Vasco da Gama 1.8.2-mc-no-regal20170707 dcc9c18 ROM (without experimental convenience store,incompatibility with updates)
C67ML Carta2
  • Carta2 1.8.1 20170207 9d236b5 ROM
  • Darwin 2 1.8.2-mc 20,170,609 472104c ROM
  • Darwin 1.8.2-mc 2 20,171,228 9,917,625 FACTORY ROM
  • Darwin 1.8.2-mc 2 20,171,228 9,917,625 UPDATEupdate removed the MP from the official site
C67ML Carta + board version 1.74 ( "pcb_ver = 2" parameter (?) )
  • Carta + 1.8.2 2017-05-31_15-54 eec1f01DUMP
  • Carta + 1.8.2 2017-11-08_18-27 d74be8e FACTORY ROM
  • Darwin 3 1.8.2-mc-no-regal20170724 60e8587 ROM
  • Darwin 3 1.8.3-mc 2018-08-09 e005164 FACTORY ROM
  • Darwin 3 1.8.3-mc 2018-09-10 2a368c8 FACTORY ROM
  • Vasco da Gama 2 1.8.1-mc-merge 2017-04-08_20-23 0dece05DUMP
  • Vasco da Gama 2 1.8.2-mc 2017-09-11 a079d55 ROM
  • Vasco da Gama 2 1.8.3-mc 2018-05-19 303595b FACTORY ROM
  • Vasco da Gama 2 1.8.3-mc 2018-08-01 81e07d9 FACTORY ROM
  • Vasco da Gama 2 1.8.3-mc 2018-09-10 2a368c8 FACTORY ROM
C67ML Carta + board version 1.76 ( "pcb_ver = 3 onyx_emmc = 1" parameter (?) )
  • Carta + 1.8.2 2017-11-08_18-27 d74be8eDUMP
  • Carta + 1.8.2 2017-11-08_18-27 d74be8e FACTORY ROM
  • Darwin 3 1.8.2-mc 20,171,019 25ff994DUMP
  • Darwin 3 1.8.2-mc 20,171,019 25ff994 FACTORY ROM
  • Darwin 3 1.8.3-mc 2018-08-09 e005164 FACTORY ROM
  • Darwin 3 1.8.3-mc 2018-09-10 2a368c8 FACTORY ROM
  • Vasco da Gama 2 1.8.3-mc 2018-05-19 303595b FACTORY ROM
  • Vasco da Gama 2 1.8.3-mc 2018-08-01 81e07d9 FACTORY ROM
  • Vasco da Gama 2 1.8.3-mc 2018-09-10 2a368c8 FACTORY ROM
C67ML Carta2 + board version 1.74 ( "pcb_ver = 2" parameter (?) )
  • Carta2 + 1.8.1 2017-03-09 da788af UNAUTHORIZED ROM
  • Carta2 + 1.8.2 2017-05-31 eeec1f01 ROM
  • Darwin 4 1.8.2-mc-no-regal2017-07-07_20-35 dcc9c18 ROM (without the support of Snow Field)
  • Darwin 4 1.8.2-mc 20,170,803 d5b0907 ROM
  • Darwin 4 1.8.2-mc 20,171,228 9,917,625 FACTORY ROM
  • Darwin 4 1.8.3-mc 20,180,816 1a86ef6 FACTORY ROM
C67ML Carta2 + board version 1.76 ( "pcb_ver = 3 onyx_emmc = 1" parameter (?) )

Bonus
MC_C67SM_Lite
James Cook 1.8.2-mc 20,171,219 af44b4d
/ S67SML Carta + /
Caesar 2 1.8.2 20170904UNAUTHORIZED ROM
MC_Kepler
Monte Cristo 1.8.2-mc
Monte Cristo 2 1.8.2-mc 20,170,803 d5b0907
Robinson Crusoe 2 1.8.2-mc 20,171,102 00e95a3

Legend:
-mc - firmware collected commissioned MakTsentr
-no-regal - firmware with function deactivated Snow Field
ROM drive - image of a complete firmware for factory tool (previously - for rkbatchtool)
UNAUTHORIZED ROM - image obtained as a finished product is not from technical support / network found on open spaces
FACTORY ROM - image collected from the dump developer you can trust
DUMP - a set of individual images of sections of EEPROM are obtained by copying the user from the device using rkdumper, pouring on the divisions reader via rkadnroidtool
UPDATE - update firmware without recovery image
Instructions on how to install and use the software-flashers in the header, as well as in most of the firmware archive
Selection for registered users of the forum

Post has been editedOptom - 27.08.19, 15:16



Rep: (229)
Pointed out that charging is slower than should be, I think. Pozameryal and I collided with something strange imho. Checked on a regular the charger MDY-09-EW, analogue of xiaomi MDY-08-EO and a couple of other dvuhampernyh power supplies. The percentage of your phone's battery charge during the experiments was about 55-75%; I did not see the indicators depending on the current strength of the percentage of charge.

When you connect the power adapter to turn on the phone device takes only 0.2 A, 0.4A. If you turn off your phone, the current is increased to 0.8-1.5 (spread on different chargers and shoelaces). This current strength is maintained, if the switch on the phone without turning off the charge after at least a few seconds, charging off.

In other words, if at the beginning of charging the phone off and on again (on reboot does not always work, because it can not have time to start charging in the off state, you need a couple of seconds) - the charge will go to 4 times faster.

From third-party applications only vatsap. Maybe something in the settings / normal phone software to limit the current and lengthen the charging process?

Post has been editedOptom - 25.08.19, 14:05



Rep: (229)
* ONYX Russia, long I wanted to ask, mention Faust 2 had a false start or have any plans. Tell you a secret, please;)



Rep: (229)
* turbo7171, email tech support http://onyx-boox.ru/contact - they send a complete firmware for the fill from the computer

While waiting for an answer, you can try to recover from the recovery:
- throw update.zip to the root of the external memory card microsd (I would have siphoned from the official sitehttps://onyx-boox.ru/support/boox_james-cookBut he does not sew;))
- turn off the reader, hold down thea buttonor a combination of (different variants: the left button-lobe (which is the "back") or something on the joystick or a combination thereof), without releasinga buttonstart to incorporate reader, keepa buttonuntil recovery signs (if gone boot animation, meansbuttonnot the one you need to try the other)
- in the recovery menu, select the physical buttons apply update from sdcard and confirm with power button



Rep: (229)
ONYX Russia @ 21.08.19, 16:24*
The more hits in MyBook from end-users, the faster they will bring to mind. The same applies to liters.
The more hits, the more frustrated owners readers XD
Hello!

Unfortunately, we have not adapted to the readers, for this reason we can not guarantee the stability of the application.
Our app is designed for phones and tablets -https://clip2net.com/s/40w3kLV

If a book is opened normally, the other book can not be opened or will open, but there will be problems during the reading.
...
Respectfully,
Your support liters



Rep: (229)
* ONYX Russia, Thanks for the link
Application Name: MyBook - library books
Developer: MyBook
Purpose: Bookstore
Required Android version:>=4.1
Link to readyAPK file
This is the same customized version?

Added by:
ONYX Russia @ 21.08.19, 14:58*
We posted today
I look - something very little information about the specific use. About CR did not write that supports Snow Field, and about AlReader have not written about the particular options enable interaction with the desktop ...

Post has been editedOptom - 21.08.19, 14:10



Rep: (229)
mmsgi @ 19.08.19, 23:24*
all that can be perescholkal in the BIOS. Maybe someone or similar situation?
Search by topic: it is necessary to disable and possibly reset the secure boot configuration
4Good T100i-T101i Wi 32 GB - Discussion (Post garik_kras # 80396954)



Rep: (229)
by_tony @ 21.08.19, 09:05*
AlReader retrofitted, because normally it opens the book from which he graduated in the archive
do not quite understand. The AR works as it should, if you open the shell reader (start screen) or from the AR library? But be careful with the tests: AR, remember, broke launcher base when the settings of interaction with the main screen onyx.



Rep: (229)
* ONYX Russia, included in the plan articles HabrГ© to support third-party software test vocabulary of shells, please



Rep: (229)
Silokey @ 20.08.19, 17:53*
Posts: 1
Silokey @ 20.08.19, 17:53*
where can I get along with databases (whether there is a free option
* Silokey, and hello to you, Comrade Major =)
Look for a version that can be installed without Google Play - the same place and installation instructions there.
Check: staffing of the Onyx Boox Newton old version 3.0.h works about as well as distributed here and there warez 4.2.1 (torrent). Basically, if familiar, it is possible to use, although manifested bugs, both in Lingua, and at the junction with OReader. Established humanoid lingual dictionaries, as I remember, cut compared with the desktop version, the possibility of adding its not tested. current version 4.11.17 did not immediately start, I began to dig no deeper. Maybe it will run - or can be other working versions between 4.2.1 and 4.11.17.May help in the subject of the application: ABBYY Lingvo Dictionaries- but no, there warez banned
I would look to the sideGolden dict

Post has been editedOptom - 20.08.19, 17:53

Full version

Help     rules

Time is now: 10/06/19, 00:08