Creation of installation media for WINDOWS with all drivers
1) Download and run the media creation tool.
2) Connect the USB flash drive to the computer and follow the instructions of the wizard to create bootable usb media.
3) After creating the bootable media on the laptop voyo v3 flagship, open PowerShell as administrator and enter the command "Export-WindowsDriver -Online -Destination D: \ $ WinPEDriver $" where "D:" the drive on which you just created the media for installing windows .

Nurtdinov,
1) I had firmware 06 - everything worked fine on it ... updated to 09 ... everything also remained to work, only the "insider" logo began to appear later!
2) Just run the EXE file ... there is nothing to change! When flashing in Windows, the area where the key is located is not overwritten (:

Posted 08/01/2017 20:43:

ONLY FOR VOYO V3 FLAGSHIP
I post the BIOS firmware YJHJ.WK113.NFBFUGA09 from 08/01/2016. for VOYO V3 FLAGSHIP with core m3 processor

For the firmware, you must download the archive voyo_V3_flagship_BIOS_NFBFUGA09 and unzip it to the root of the C: \ drive ->run as administrator "C: \ voyo_V3_flagship_BIOS_NFBFUGA09 \ H2OFFT-Wx64.exe" ->affirmatively answer all questions.

After shutting down, I advise you to wait a few minutes and then turn on the laptop! ->wait a few minutes until the desktop appears.

Also, if you want to see the inscription "inside" at boot time, you need to go into the UEFI BIOS ->Device Manager ->Primary Video BIOS and select there PCI.

So far, it’s too early to talk about the pros and cons in NFBFUGA06 and NFBFUGA09!
After BIOS firmware, 3 additional devices appear.
Drivers for them can be found on the Internet.


Thanks forest 67, and Serg988 ,.

I found a way out. Through HDMI everything is visible on the external monitor. Here is a photo of the TV.

A similar problem, I tried everything, all the combinations. I connected an external keyboard - the same thing.

It is still not clear how the wifi module works. Among the devices it simply is not. Prior to that, the whistle was displayed as a wifi, but did not connect to any network, after updating the driver (driverpack) it completely stopped working. An attempt to reinstall the driver did not help; the module simply disappeared. As if he was not in the laptop.

Do you also have a core m laptop?
Today I will also try to connect to an external monitor via HDMI. It may help.

I think, could not the Chinese thus hide the bios from the playful hands of users? To less bricks or devices?

Turn on-off learned. Thanks, you really have to count, and you can still follow the LED (it flashes differently than on an atom). And in the bios does not go. Tried all F keys, Esc, Delete. And kept, and intermittently stung. Everything worked on the atom, it is not here. I would like the owner of the version on core m to share ...

Addition: It seems that by Esc, I still go into the BIOS, for example, because the computer responds to caps lock with a corresponding LED. But the screen is dead black. You can exit only by pressing the power button. The same story when trying to boot from a flash drive through the system - recovery - special boot options, etc. Everything ends with a black screen. Very strange ... No one had that?