guys.kinte a preloader from old firmware

Here is a working way to restore bricks.
The phone was flashed during the firmware-upgrade mode and killed.

Firmware
Fleshtool
auth_sv5.auth file below (indicate in the USB flash drive under the scatter button)
and scatter down
DA_PL.bin and take a flash drive from this topic and specify Download Agent

When connecting or holding the buttons, the volume is down and turned on, the phone is first defined as mtk port after 4-5 seconds as a preloader again after a second again mtk port.
It can be flashed if you catch Preloader a, and the USB flash drive just hangs when you click on the download button,
By this I connected, kept the buttons down and turning on the volume, after re-connecting I counted for 4 seconds and a half (including hang) and pressed the download button. a few times turned out.
Will add to the cap and then the people are suffering.
checkboxes from secro.img, custom.img and preloadera remove if not what is wrong.


MT6750_Android_scatter.txt(13.86 KB)
auth_sv5.rar(1.98 KB)


Post has been editedNodirabzi - 22.03.18, 01:04

Here is the correct way
\ sdcard \ TWRP \ BACKUPS \ SMART_Surf_4G \

Drove from Beeline in this way.
1 I downloaded the firmware from the caps for Russia.
2 I saved the nvram of the phone so that after the format Imei is replaced.
3 Formatted the phone in the USB flash drive
4 I flashed it in the Firmware Upgrade.
5 Returned nvram.
Everything works with all sims,

here's a real way to fix a brick, my successful method.
The state of the brick.
1 Hanging on the logo.
2 CWM recovery is not working, since the data sections, etc., are not mounted, and there are errors everywhere.
3 TWRP is not a working sensor.
I tried.
I uploaded firmware in all modes through flash tool.
Filled a full backup ROM which is here.
I mixed different firmware, that is, the preloader is killed, etc.
The result, Hanging on the logo and all.

Instructions.

1- Flash this firmware in Formatall-Download mode
fromFly IQ4409. tel dies completely but
this is useful.
2- we sew in the current order.
Scatter fromFly IQ4409
uuboot.bin, preloader fromof this
3- cwmthis
4- flash in dowload mode and we will get a semi-working, but quite suitable for flashing with a firmware firmware phone with a working sensor. It remains to flash the custom firmware ExceptionOS
Please add a topic to the header.

Post has been editedNodirabzi - 02.09.17, 07:09

I have a Z90-7 Handset.
Restored the network with these parameters, but after them only 2G (edge) worked
3G was not.
Then I tried the parameters from XDA
My Intl 1 + 1:
01877: 562950069289856
00946: 0x06E8
02954: 131072
00441: 0x380
06828: 687194832973
After them, 3G is.
And the network smelled immediately, without firmware and updates.

Post has been editedNodirabzi - 24.02.17, 02:43

Hello!
I have Apparate gpon ont rft620
IP 192.168.1.1 with the user account comes in, but the minimum setting does not triple, you need to configure wan.
Help pozh .....

Post has been editedNodirabzi - 31.08.16, 22:54

Well, at least nvram fill.

murzik78 : Please post a full memory dump with the programmer. : yes2:
Atho, I received the root with the program 360rut, I unlocked it with the help of a volcano, I lost it after a few reboots, I can not restore it.
Backups did, but after making sure to remove the strap. : blush:

Post has been editedNodirabzi - 22.03.16, 03:13

Has anyone been able to get RTH?
And about the unlock from Orerator?

What about audio conferences using the following scheme: Internet -> Internet -> GSM? How can this be implemented?

Not long ago bought this smartphoneSKY A730Simported from Korean, the interface language is mixed English with Korean.
I wanted to master the Android OS because I bought it.
I just wanted to flash it for convenience, I was fiddling with and no, and I did not find the firmware.
It would be wonderful if there is a Russian firmware, at least English.
I will be grateful for any help