Rep: (31)
Also, after the last update, the page became strange and slowly updating. I thought at first - it seemed. It turned out - it didn’t seem (((Let's hope - they will correct it. The rest is normal.



Rep: (31)
* Gigamax01, my zhor depends in some magical way only on the time of day: if I “emulate” the night by setting the appropriate settings, during the day everything is fine, there is no zhora (Yes, apparently, some local individual glitch. If it does not disappear, a complete reset with manual reinstallation of everything.



Rep: (31)
* Gigamax01, wait for the night then, that in the afternoon in any mode the charge is spent very carefully. And at night, even if you completely turn off everything and activate energy saving, - the battery is abnormal. In general, it's not about auto backup. The next step is partial, and if it does not help, a complete reset. I will report the results. So far, having read the thread, I noticed: after any noticeable changes in the clock (firmware, software, functions), glitches often start either with a charge or with the work of individual system components. I wonder if this is a Tizen chip or a specific device?



Rep: (31)
* Ljusalfheim I agree, I put it wrong. The concept itself, of course, is absolutely reasonable. It seemed to me simply that once every day, even when I’m not charging, the date of the last auto backup was updated, the mechanism is still different. But I do not argue, maybe, indeed, individual changes were recorded. Nevertheless, I’ll try to see what’s happening there without an auto backup. If again a powerful discharge per night - the reason is something else. Well, and to the edge - dump. In the afternoon, today they hold the charge perfectly in the active mode (I ran, fiddled with the settings, put a couple of minimalistic dials, etc.).



Rep: (31)
* vadimm powerfully, I have no more than 4 days. Just the operating conditions did not change. From a word in general: neither settings, nor a list of installed applications / dials. One was a change: map the map to Spay. Here is the method of exception and sinned on him.

And in the description of the auto backup, a strange one is written - they say, only on charging and over Wi-Fi. My entire procedure took place without charging, just in pairing mode with a phone that is either on a mobile network or wi-fi. Once a day. In general, it is strange. Glitch. I don’t find the reasons. I continue to follow.



Rep: (31)
* Amf1tamin It is not included - until I used it. But I'll try to save energy at night)



Rep: (31)
* Gigamax01, Yeah, and here’s what I thought: I have automatic backup enabled in the Gear manager settings, and maybe he’s just trying to backup at night, but he can’t, because in the "airplane" mode, the battery is landing. I chopped off this option, I'll observe. And it’s a shame: during the day for almost 18 hours, the consumption is 6%, and at night it’s like that .. Hmm ... Frustrated)



Rep: (31)
Hello again! A new misunderstanding: the very literally next day after successfully linking the card to Spay (maybe it just happened, of course) for 2 nights in a row, the battery runs out very much during the night. At night I turn off the screen by gesture, activate the flight mode. Previously, this allowed to save a lot of charge at night, and today, for example, from 23:00 to 6:30 - the loss of 80% of the charge, from 94 to 14 (and directly heated). In statistics, there is no particular information, 2 applications - watchface, Samsung health. Who faced What is the possible reason? I don’t want to do a reset yet, there were problems with the definition in Samsung Health accessories, I really do not want dancing with a tambourine again. Yes, and you need to know the reason. Thank!



Rep: (31)
So, Samsung Galaxy Note 3 (stock 5.0 + root superSU), installed Xposed and did everything exactly according to the instructions (forcibly stopped the necessary processes, etc.) - alas, everything is unchanged, as with Magisk ... Demolition of the root also gives nothing (Negative experience is also experience: maybe it will save someone with a similar device from a day of disembodied ordeals)



Rep: (31)
instruction in detail pzhl - I will join. Note 3, stock 5.0 + root (superSU). He took down the root, put the root from the magisk - glitches, forkslose applications phone and no result. I was forced to return the status quo (I do not risk Xposed - like on samsa bootlops (((



Rep: (31)
* Pg up mysticism ... In my applications through Samsung Galaxy Apps only Endomondo is visible. Well, my watch doesn’t connect to S Health either. Maybe it still depends on the firmware version. I am lost in conjecture.



Rep: (31)
* Pg up with the fact that they were originally in the watch, and not installed from the store. You can check in the settings in Gear in the application section for everyone whether the latest version is installed. And if not, update.



Rep: (31)
Brothers, I can’t find the watch in S Health accessories. By BT it is visible and connected everywhere, namely to S Health in any way. On different devices. Maybe what subtlety is? Please share how you connected your Gear S3 to S Health on your phone. It's a shame terrible, everything works fine except for this very necessary feature ((((Thanks for the help !!



Rep: (31)
* shmikes Yes. Other devices (Android phones and tablets, not just Samsung) can connect the watch via BT, but there are no watches in S Health accessories (((



Rep: (31)
* shmikes
1. On the phone, in the BT settings, I pressed unpair.
2. Unloaded Samsung Gear and Gear plugin applications from memory.
3. Unloaded the S Health application from memory.
4. Turned off and on BT again on the phone and watch.
5. Launched S Health, went to the menu in the accessories section, clicked the "scan" button.

And nothing. Does not find. Although the clock is visible in BT settings, it is available for connection.
It is curious that the watch was even connected to the Lumia 640 LTE DUAL SIM ...



Rep: (31)
* shmikes tried several times - to no purpose. Nothing happens. Moreover, in the available BT devices, 2 devices are visible - the clock is just like BT, and as a BLE device. And still, S Health does not find it in accessories. Rebooted the phone and watch. What am I doing wrong? (



Rep: (31)
* shmikes paired, yes. And connected by BT. Connected as phone audio.



Rep: (31)
* shmikes I go into the Samsung Gear, select the Samsung Health item, press it, this application opens, select accessories in the menu, scan - and the application does not detect the clock ((Or should it be otherwise somehow?



Rep: (31)
* shmikes Unfortunately no. S Health as an accessory does not find them. But in the list of BT devices they are, are designated as connected, are displayed in the Gear manager. Apparently, I’m doing something wrong, but I don’t understand that ((



Rep: (31)
Colleagues, welcome! There is a question about S Health synchronization on the Samsung Galaxy Note 3 LTE sm-n9005 and the Samsung gear S3 Frontier watch. Versions of applications and firmware are current (the latest). There is no button in the "steps" tab to select the source of information (phone or watch), the data is not synchronized, when you try to enter the "together" section on the watch, it displays the message "enable this function on the phone", but it is already on. How to synchronize, link the clock and phone in S Health ?! (((( Thanks for the help.

Full version

Help     rules

Now: 09/08/19, 03:54