Search -savagemessiahzine.com

savagemessiahzine.com

Help

rules

savagemessiahzine.com > Search form >Search

9 pages

1 2 3 4 5 6 > »

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.10.18, 10:15
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	level001 @ 10.10.18, 12:03 After flashing you need to reboot again by ctrl-i those. I flash, then reboot, load ctrl + i and try to register to write fw_setenv?
	Forum:Media consolesВ· View message:#77722652В· Replies:20382 В· Views: 4550938

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.10.18, 10:09
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Re.gid @ 10.10.18, 11:53 re-read the instructions, apparently not the load kernel I have already flashed 7 consoles, all my relatives use and rejoice, only before that the consoles were SL-IPTV002_105_8, and this first and only SL-IPTV002_123_D without SPI But I try to flash it according to the same instructions as I made the prefix before, because I did not find another one. Maybe there are some nuances when flashing the console without SPI?
	Forum:Media consolesВ· View message:#77722519В· Replies:20382 В· Views: 4550938

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.10.18, 09:52
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Re.gid @ 10.10.18, 11:40 why you sewed something wrong, rspish the order of actions from the moment the prefix was virgin The prefix is вЂ‹вЂ‹virgin, the firmware (I tried several different ones) on the flash drive is inserted into the console, I connected the UART, I connected Putty, I turned on the prefix, Ctrl + I further on instructions # mkdir / tmp / sda # ls / dev / sda * # mount / dev / sda1 / tmp / sda # download --vendor-name = SmartLabs - device-name = sml723x --cert-dir = / etc / branding / certificates --url = file: ///tmp/sda/firmware.bin -vv # fw_setenv forced_middleware_urlhttp://stb.smlbox.tk:80 # fw_setenv firmware_version 6.0.0 and here at the fw_setenv step, the answer is always fw_setenv: can't open '/ dev / mtd6': Permission denied
	Forum:Media consolesВ· View message:#77722147В· Replies:20382 В· Views: 4550938

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.10.18, 09:25
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	owl1302 @ 04.10.18, 21:57 MonDee, where the firmware log, without it, you will not be prompted. You have a board without SPI, which firmware they sewed I tried different, but the result is one. Here is the log when trying to flash 5.22654.180921 BCM72310012 AVS 0.5.5 B1 PV = 00000319 PV = 0000031D MV = 000003A8 M0 SHMOO VER 1.17 MCB PKID 20131007 003B6000 003B0000 0496103E 00001C00 S3000019F 00001090 +00000004 >00000109 t0000001F 0000003C @00000096 ^00000015 RDEN W0 00000015 00000007 00000000 RDLY W0 00000003 RDQS W0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ----------- +++++++++++++++++++++ X ++++++++++++++++++++ ------------- 01 ------------ +++++++++++++++++++++ X +++++++++++++++++++++ ----------- 02 ---------- ++++++++++++++++++++ X +++++++++++++++++++ --------------- 03 ----------- +++++++++++++++++++++ X ++++++++++++++++++++++ ----------- 04 - +++++++++++++++++++++ X +++++++++++++++++++++ -------------------- 05 ------------ ++++++++++++++++++++++ X +++++++++++++++++++++ ------------- 06 ----- ++++++++++++++++++ X ++++++++++++++++++ ---------------------- 07 ------------------ +++++++++++++++++++++ X +++++++++++++++++++++ ----- 08 -------- ++++++++++++++ X ++++++++++++++ -------------------------- - 09 --------- +++++++++++++++++ X ++++++++++++++++ --------------------- 10 --------- ++++++++++++++++ X +++++++++++++++ ---------------------- 11 ------- +++++++++++++++ X ++++++++++++++ -------------------------- - 12 - ++++++++++++++++++ X +++++++++++++++++ ------------------------- 13 ------ +++++++++++++++ X ++++++++++++++ ---------------------------- - 14 ---- + - ++++++++++++++++ X +++++++++++++++ ------------------------- 15 ------------ ++++++++++++++++ X ++++++++++++++++ ------------------- P w0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ----------- +++++++++++++++++++++ X ++++++++++++++++++++ ------------- 01 ------------ +++++++++++++++++++++ X ++++++++++++++++++++ ------------ 02 --------- ++++++++++++++++++++ X ++++++++++++++++++++ --------------- 03 ---------- + - ++++++++++++++++++++ X +++++++++++++++++++++ ----------- 04 --- ++++++++++++++++++++ X +++++++++++++++++++++ -------------------- 05 ------------ ++++++++++++++++++++++ X +++++++++++++++++++++ ------------- 06 ------ +++++++++++++++++++ X ++++++++++++++++++ --------------------- 07 ------------------ +++++++++++++++++++++ X ++++++++++++++++++++ ------ 08 ---- ++++++++++++++++ X +++++++++++++++ --------------------------- 09 ----- ++++++++++++++++++++ X ++++++++++++++++++ --------------------- 10 ----- + - +++++++++++++++++ X +++++++++++++++++ ---------------------- 11 - + - +++++++++++++++++ X ++++++++++++++++ -------------------------- 12 +++++++++++++++++++ X ++++++++++++++++++ ------------------------- 13 - +++++++++++++++++ X +++++++++++++++ ---------------------------- 14 - ++++++++++++++++++ X +++++++++++++++++ ------------------------- 15 ---------- +++++++++++++++++ X +++++++++++++++++ ------------------- N w0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 -------- ++++++++++++++++++++++ X +++++++++++++++++++++++ ------------- 01 --------- +++++++++++++++++++++ X +++++++++++++++++++++++ ------------ 02 ------- +++++++++++++++++++++++ X ++++++++++++++++++++++++ ----------- 03 --------- +++++++++++++++++++++++ X +++++++++++++++++++++++ --------- 04 - ++++++++++++++++++++++ X ++++++++++++++++++++++++ ------------------ 05 ----------- ++++++++++++++++++++++ X ++++++++++++++++++++++++ -------- 06 ----- +++++++++++++++++++ X +++++++++++++++++++ -------------------- 07 -------------- + - +++++++++++++++++++++ X ++++++++++++++++++++++ ----- 08 ------- +++++++++++++++++++ X ++++++++++++++++++++ ------------------ 09 ---------- +++++++++++++++++++++ X ++++++++++++++++++++ -------------- 10 --------- ++++++++++++++++++++ X ++++++++++++++++++++ --------------- 11 -------- +++++++++++++++++++ X ++++++++++++++++++ ------------------- 12 --- ++++++++++++++++++++ X ++++++++++++++++++++ -------------------- 13 ------- ++++++++++++++++++ X ++++++++++++++++++ -------------------- 14 ----- +++++++++++++++++++++ X +++++++++++++++++++++ ------------------ 15 ----------- +++++++++++++++++++++ X ++++++++++++++++++++ ------------- WRDQ W0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++ X +++++++++++++++++ ------------ ++++++++++++++++ 01 ++++++++++++++++++++ X +++++++++++++++++++ ----------- ++++++++++++++ 02 ++++++++++++++++++++ X +++++++++++++++++ ------------- +++++++++++++++ 03 ++++++++++++++++++++ X ++++++++++++++++++++ ---------- ++++++++++++++ 04 ++++++++++++++++++++++++++++++++++++++ 05 ++++++++++++++++++++ X ++++++++++++++++++ ---------- ++++++++++++++++ 06 +++++++++++++++ X +++++++++++++++ ------------------ ++++++++++++++ 07 - +++++++++++++++++++ X ++++++++++++++++++ -------------- ++++++++++ 08 ++++++++++++++++++++++++++++++++++ --------------- ++++++++++++++++ 09 ++++++++++++++++++++++++++++++++++++++ 10 +++++++++++++++++++++++++++++++++++++ ------------- +++++++++++++++ 11 ++++++++++++++++++++++++++ ---------------- +++++++++++++++ 12 ++++++++++++++++++++++++++++++++ + 13 ++++++++++++++++++++++++++++++++ + 14 ++++++++++++++++++++++++++++++ ---------------- ++++++++++++++++ 15 +++++++++++++++++++++++++++++++++ -------------- ++++++++++++++++ WRDM W0 00000012 WRDM W0 00000010 ADDR 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ++++++++++++++++++++++++++++++ SX ++++++++++++++++++++++++++++++++ SCZS L2 = 1 LLMB = 1 BrCfg = E30F37C6 #@ Reset flags: aux_chip_level_reset_1: - aux_chip_level_reset_0: - aux_chip_edge_reset_1: - aux_chip_edge_reset_0: - cpu_ejtag_reset: - overtemp_reset: - overvoltage_reset: - undervoltage_reset: - security_dl_sw_reset: - security_master_reset: - software_master_reset: - pcie_hot_boot_reset: - watchdog_timer_reset: - smartcard_insert_reset: - s3_wakeup_reset: - front_panel_4sec_reset: - tap_in_system_reset: - main_chip_reset_input: + power_on_reset: + SML482 (BCM97230B2) CFE v3.23 build 822, CFE core v3.53, Endian Mode: Little Build Date: Fri May 20 01:31:39 MSK 2016 (roman @ ubuntu) Copyright (C) Broadcom Corporation. **************************************** System initialization forced via Ctrl-I **************************************** Hit any key to stop autoboot: Enabling NAND flash at CS0: S34ML01G2 (DEVICE ID = 0x01F1801D, IDEXT = 0x01F1801D), ECC Level = 4, Spare Area Size = 16 1Gbit flash detected, choosing 1GBit partition layout CPU speed: 742MHz DDR Frequency: 796 MHz DDR Mode: DDR3 Total memory (MEMC 0): 512MB MEMC0 chip_size: 4096Gbits (reg = 0) Number of DDR chips: 1 MEMC0 DDR Width: 16 DDR device Width: 8 DDR device tech: 2048Mb (reg = 4) DDR strap from memc: 0 DDR strap from reg: 0 Splash loader version: 1 Boot Device: NAND Total flash: 128MB RTS VERSION: Initial RTS Version ETH0_PHY: INT ETH0_MDIO_MODE: 1 ETH0_SPEED: 100 ETH0_PHYADDR: 1 Backup MAC: "wiped" Backup S / N: "erased" Effective MAC: "" Effective S / N: "" INFO: Configuring LEDs for PCB rev. 7 Auto-calibrating DDR drive level [EMC] Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub CFE initialized. Starting splash screen. No valid image found in flash0.splash - disabling splash Executing automatic system init: - <waitusb -t = 0 -d = 'USB Disk' && batch usbdisk0: sysinit.txt> USB: New device connected to bus 0 hub 1 port 1 USB: Resetting device on bus 0 hub 1 port 1 USB: Locating Class 08 Vendor 090C Product 1000: Mass-Storage Device USBMASS: Unit 0 connected Loader: raw Filesys: fat Dev: usbdisk0 File: sysinit.txt Options: (null) Loading: .. 36 bytes read Loader: elf Filesys: fat Dev: usbdisk0 File: bootstrap.bin Options: (null) Loading: prog_seg: 0x80001000 / 7922688 bss: 0x8078f400 / 146256 Entry address is 0x80440ec0 Starting program at 0x80440ec0 Linux version 3.3.8-2.0 ([email protected]) (gcc version 4.5.3 (Broadcom stbgcc-4.5.3-2.4)) # 4 SMP Fri Jun 27 04:25:45 MSK 2014 Fetching vars from bootloader ... Serial number is "XXXXXXXXXXXXX" This revision (7) of SML-482 is not supported. Defaulting to rev. five found 15 vars. Options: moca = 0 sata = 1 pcie = 0 usb = 1 Using 512 MB + 0 MB RAM (from CFE) bootconsole [early0] enabled CPU revision is: 0002a064 (Broadcom BMIPS4380) FPU revision is: 00130001 Determined physical RAM map: memory: 10,000,000 @ 00000000 (usable) memory: 10,000,000 @ 20,000,000 (usable) bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000 @ 0x04000000) bmem: adding 192 MB RESERVED region at 512 MB (0x0c000000 @ 0x20000000) Initrd not found or empty - disabling initrd Zone PFN ranges: Normal 0x00000000 ->0x00030000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 ->0x00010000 0: 0x00020000 ->0x00030000 PERCPU: Embedded 7 pages / cpu @ 81606000 s5120 r8192 d15360 u32768 Built 1 zonelists in Zone order mobility grouping on. Total pages: 129536 Kernel command line: bmem = 192M @ 64M bmem = 192M @ 512M nandcs = 2 panic = 5 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes Memory: 116560k / 524288k available (4436k kernel code, 407728k reserved, 1173k data, 2128k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS: 160 Measuring MIPS counter frequency ... Detected MIPS clock frequency: 742 MHz (371.253 MHz counter) Console: color dummy device 80x25 Calibrating delay loop ... 741.37 BogoMIPS (lpj = 370688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 SMP: Booting CPU1 ... CPU revision is: 0002a064 (Broadcom BMIPS4380) FPU revision is: 00130001 Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes SMP: CPU1 is running Brought up 2 CPUs NET: Registered protocol family 16 USB0: power enable is active high; overcurrent is active low USB1: IOC was not set by the bootloader; forcing default settings USB1: power enable is active low; overcurrent is active low bio: create slab<bio-0>at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource wktmr NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP Established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.30 [Flags: R / O]. JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc. fuse init (API version 7.18) fuse init DCACHE_BUG workaround enabled msgmni has been set to 227 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A console [ttyS2] enabled, bootconsole disabled 67) is a 16550A console [ttyS2] enabled, bootconsole disabled brd: module loaded loop: module loaded ahci: SSS flag set, parallel bus scan disabled ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci strict-ahci.0: flags: ncq sntf stag clo slum part scsi0: ahci_platform scsi1: ahci_platform ata1: SATA max UDMA / 133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41 ata2: SATA max UDMA / 133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41 brcmstb_nand: NAND controller driver is loaded Config internal EPHY through MDIO eth% d: Link down ata1: SATA link down (SStatus 0 SControl 300) No PHY detected, not registering interface: 1 bcmgenet: probe of bcmgenet.1 failed with error -5 pegasus: v0.6.14 (2006/09/27), Pegasus / Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0: 1.0: USB hub found hub 1-0: 1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0: 1.0: USB hub found hub 2-0: 1.0: 1 port detected ata2: SATA link down (SStatus 0 SControl 300) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3 ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400 hub 3-0: 1.0: USB hub found hub 3-0: 1.0: 1 port detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4 ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600 hub 4-0: 1.0: USB hub found hub 4-0: 1.0: 1 port detected Initializing USB Mass Storage Driver ... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS / 2 mouse device for all mice lirc_dev: IR Remote Control driver registered, major 253 IR LIRC bridge handler initialized sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright (c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-brcmstb sdhci-brcmstb.0: Enabling controller mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 PM: CP0 COUNT / COMPARE frequency does not depend on divisor 1-1 usb: new high-speed USB device number 2 using ehci-brcm EBI CS0: setting up NAND flash (primary) ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD / Spansion S34ML01G2) ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD / Spansion S34ML01G2) brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. Creating 8 MTD partitions on "brcmnand.0": 0x000000000000-0x000000100000: "bootldr" 0x000000100000-0x000000110000: "macadr" mtd: partition "macadr" 0x000000110000-0x000000120000: "nvram" mtd: "nvram" partition does not start on an erase block boundary - force read-only 0x000000120000-0x000000180000: "branding" 0x000000180000-0x000000200000: "splash" 0x000000200000-0x000000600000: "ro_kernel" scsi2: usb-storage 1-1: 1.0 0x000000600000-0x000000610000: "env" mtd: partition "env" 0x000000610000-0x000000800000: "bsec" mtd: partition "bsec" EBI CS2: setting up NAND flash No NAND device found Freeing unused kernel memory: 2128k freed mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. 0mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. mmc0: Got command interrupt 0x00080000 even though no command operation was in progress. Fri Jan 1 00:00:00 UTC 2010 Found brandingfs mtd device: / dev / mtdblock3. Mounting ... mtd device mount successful BRANDING = rt BRANDING_DEFAULT_UPGRADE_URL = norm: //239.83.77.78: 9999 BRANDING_ETH0_WAIT_DHCP = BRANDING_DHCP_CLASSID_SUFFIX = rt BRANDING_CHECK_ROOTFS = once SmartSDK version: sml723x_sdk-1.5.62.28.2_refsw-20121210_qt-4.7.3 Generating fw_env.config file for SmartLabs SML-482/492 Quirks BEGIN BOARD: sml723x ---------------------------------------------- ---------------- fw_setenv: can't open '/ dev / mtd6': Permission denied 0Initializing environment ... fw_setenv: can't open '/ dev / mtd6': Permission denied ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e Missing MAC address in fw_env. Reading from cfe_env Error: STB has no MAC address assigned at factory ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e Missing serial number in fw_env. Reading from cfe_env Error: STB has no serial number assigned at factory ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e Quirks END ------------------------------------------------ --------------------- ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e RESTORE_FIRMWARE = вЂ‹вЂ‹0 ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e brcmfb: addr = 0xac800000 offset = 0x00 fb0: Broadcom frame buffer device 00scsi 2: 0: 0: 0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 4 sd 2: 0: 0: 0: Attached scsi generic sg0 type 0 sd 2: 0: 0: 0: [sda] 31457280 512-byte logical blocks: (16.1 GB / 15.0 GiB) sd 2: 0: 0: 0: [sda] Write Protect is off sd 2: 0: 0: 0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda4 sd 2: 0: 0: 0: [sda] Attached SCSI removable disk 0fbsplash: daemonizing0 ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e hostname is sml723x- ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e Splash message: Configuring filesystem ... Error: missing "raw" mtd device !!! dev: size erasesize name mtd0: 00100000 00020000 "bootldr" mtd1: 00010000 00020000 "macadr" mtd2: 00010000 00020000 "nvram" mtd3: 00060000 00020000 "branding" mtd4: 00080000 00020000 "splash" mtd5: 00400000 00020000 "ro_kernel" mtd6: 00010000 00020000 "env" mtd7: 001f0000 00020000 "bsec" Splash message: Configuring network interfaces ... ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e IGMP version: lo V2 eth0 v2 ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ================================================== 1. Boot from NFS share 2. Boot from FLASH memory 3. Force upgrade with any firmware 4. Erase "env" partition and reboot 0. Stop booting R. Reboot Press [012] to change rootfs source: 2 Do not boot rootfs ... Boot failed Splash message: Failed to load root file system ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e ## fw_printenv: Error: CRC error, header: 0xffffffff, counted: 0x705fe70e Using "sml723x-rt" as DHCP Vendor Class ... DHCP client options: -n -q -V sml723x-rt Splash message: Warning: Missing network connection! udhcpc (v1.16.0) started Sending discover ... Sending discover ... Sending discover ... Sending discover ... Sending discover ... No lease, failing Starting telnet ... sml723x- login: root Jan 1 00:00:23 login [634]: root login on 'ttyS2' # mkdir / tmp / sda # ls / dev / sda * / dev / sda / dev / sda1 / dev / sda4 # mount / dev / sda1 / tmp / sda FAT-fs (sda1): IO FAT-fs filesystem will be case sensitive! # download --vendor-name = SmartLabs --device-name = sml723x --cert-dir = / etc / brandin g / certificates --url = file: ///tmp/sda/firmware.bin -vv download.c (3380) [0 s]: Command line arguments values: download.c (3382) [0 s]: - vendor: SmartLabs download.c (3384) [0 s]: - device: sml723x download.c (3386) [0 s]: - hw revision: 0 download.c (3388) [0 s]: - version: 0.0.0 download.c (3403) [0 s]: - certificates dir: / etc / branding / certificates download.c (3405) [0 s]: - timeout per retry: 5 download.c (3407) [0 s]: - max retries: 1 download.c (3415) [0 s]: - flash timeout: 30 seconds source_file.c (0046) [1 s]: Config file "/tmp/sda/firmware.bin.config" found download.c (3510) [1 s]: Firmware candidates: download.c (3520) [1 s]: - 5.22654.180921 (hw rev. 5) force: file: ///tmp/sda/firmware.bin download.c (3554) [1 s]: Best URL: file: ///tmp/sda/firmware.bin download.c (0607) [1 s]: -1% Please wait. Preparing to download firmware ... download.c (2312) [1 s]: Verifying firmware checksums and RSA signature ... verify.c (0087) [1 s]: Loading the CA root certificate ... verify.c (0106) [1 s]: Loading certificates from "/ etc / branding / certificates" ... verify.c (0163) [1 s]: Loading cerificate from file "/etc/branding/certificates/RESTREAM-cert.pem" ... verify.c (0163) [1 s]: Loading cerificate from file "/etc/branding/certificates/rostelecom-generic-cert.pem" ... download.c (2402) [1 s]: signature [0] length: 256 download.c (2402) [1 s]: signature [1] length: 256 download.c (2402) [1 s]: signature [2] length: 256 download.c (2423) [1 s]: Calculating firmware hashsum ... download.c (2440) [13 s]: Firmware SHA1 sum: b2d218114f63f7b28e6fe3687ef9cdcc2cda8da1 download.c (2451) [13 s]: checking signature 1 (3) verify.c (0259) [13 s]: Checking against "C = RU, ST = Moscow, L = Moscow, O = SmartLabs LLC, CN = Rostelecom Generic STB, [email protected]" ... verify.c (0272) [13 s]: Signature check failed verify.c (0259) [13 s]: Checking against "C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected]" ... verify.c (0276) [13 s]: Signature matches: C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected] download.c (1997) [13 s]: Block 1 (signed) @ addr = 0x0x74080378 download.c (1998) [13 s]: data size: 0x003cff40 (3997504) byte (s) download.c (1999) [13 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [13 s]: type: 2 (Linux Kernel Image) download.c (2001) [13 s]: CRC32: 0x11288cd2 download.c (2004) [13 s]: signature [0] length: 256 download.c (2004) [13 s]: signature [1] length: 256 download.c (2004) [13 s]: signature [2] length: 256 download.c (2011) [13 s]: SHA1: cd8eb71ddcec6dbd7ae5f685b6b17a33557d2206 download.c (2014) [13 s]: content: gzip compressed data download.c (2546) [14 s]: Block SHA1 sum: cd8eb71ddcec6dbd7ae5f685b6b17a33557d2206 download.c (2552) [14 s]: checking signature 1 (3) verify.c (0259) [14 s]: Checking against "C = RU, ST = Moscow, L = Moscow, O = SmartLabs LLC, CN = Rostelecom Generic STB, [email protected]" ... verify.c (0272) [14 s]: Signature check failed verify.c (0259) [14 s]: Checking against "C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected]" ... verify.c (0276) [14 s]: Signature matches: C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected] download.c (1997) [14 s]: Block 2 (signed) @ addr = 0x0x744505e0 download.c (1998) [14 s]: data size: 0x02f7c000 (49790976) byte (s) download.c (1999) [14 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [14 s]: type: 3 (Root FS Image) download.c (2001) [14 s]: CRC32: 0x91ade41a download.c (2004) [14 s]: signature [0] length: 256 download.c (2004) [14 s]: signature [1] length: 256 download.c (2004) [14 s]: signature [2] length: 256 download.c (2011) [14 s]: SHA1: cfe382201fae361bfc8ebeb92facd4c8d34e75ba download.c (2014) [14 s]: content: SquashFS download.c (2546) [29 s]: Block SHA1 sum: cfe382201fae361bfc8ebeb92facd4c8d34e75ba download.c (2552) [29 s]: checking signature 1 (3) verify.c (0259) [29 s]: Checking against "C = RU, ST = Moscow, L = Moscow, O = SmartLabs LLC, CN = Rostelecom Generic STB, [email protected]" ... verify.c (0272) [29 s]: Signature check failed verify.c (0259) [29 s]: Checking against "C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected]" ... verify.c (0276) [29 s]: Signature matches: C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected] download.c (1997) [29 s]: Block 3 (signed) @ addr = 0x0x773cc908 download.c (1998) [29 s]: data size: 0x00005000 (20480) byte (s) download.c (1999) [29 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [29 s]: type: 5 (Branding Image) download.c (2001) [29 s]: CRC32: 0x79baadb8 download.c (2004) [29 s]: signature [0] length: 256 download.c (2004) [29 s]: signature [1] length: 256 download.c (2004) [29 s]: signature [2] length: 256 download.c (2011) [29 s]: SHA1: 5e7295bbb5f0f6964f9b4d0138ac2a4f1650b45f download.c (2014) [29 s]: content: Cramfs download.c (2546) [29 s]: Block SHA1 sum: 5e7295bbb5f0f6964f9b4d0138ac2a4f1650b45f download.c (2552) [29 s]: checking signature 1 (3) verify.c (0259) [29 s]: Checking against "C = RU, ST = Moscow, L = Moscow, O = SmartLabs LLC, CN = Rostelecom Generic STB, [email protected]" ... verify.c (0272) [29 s]: Signature check failed verify.c (0259) [29 s]: Checking against "C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected]" ... verify.c (0276) [29 s]: Signature matches: C = RU, ST = Moscow, O = JSC Restream, CN = Restream Certificate Authority, [email protected] download.c (0607) [29 s]: 75% Please wait. Flashing firmware ... download.c (2863) [29 s]: Starting block 0 of 3 ... download.c (1997) [29 s]: Block 1 (signed) @ addr = 0x0x74080378 download.c (1998) [29 s]: data size: 0x003cff40 (3997504) byte (s) download.c (1999) [29 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [29 s]: type: 2 (Linux Kernel Image) download.c (2001) [29 s]: CRC32: 0x11288cd2 download.c (2004) [29 s]: signature [0] length: 256 download.c (2004) [29 s]: signature [1] length: 256 download.c (2004) [29 s]: signature [2] length: 256 download.c (2011) [29 s]: SHA1: cd8eb71ddcec6dbd7ae5f685b6b17a33557d2206 download.c (2014) [29 s]: content: gzip compressed data Device for block # 1 ('bsec' '/ dev / mtd7:'). download.c (2863) [29 s]: Starting block 1 of 3 ... download.c (1997) [29 s]: Block 2 (signed) @ addr = 0x0x744505e0 download.c (1998) [29 s]: data size: 0x02f7c000 (49790976) byte (s) download.c (1999) [29 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [29 s]: type: 3 (Root FS Image) download.c (2001) [29 s]: CRC32: 0x91ade41a download.c (2004) [29 s]: signature [0] length: 256 download.c (2004) [29 s]: signature [1] length: 256 download.c (2004) [29 s]: signature [2] length: 256 download.c (2011) [29 s]: SHA1: cfe382201fae361bfc8ebeb92facd4c8d34e75ba download.c (2014) [29 s]: content: SquashFS Device for block # 2 ('bsec' '/ dev / mtd7:'). download.c (2863) [29 s]: Starting block 2 of 3 ... download.c (1997) [29 s]: Block 3 (signed) @ addr = 0x0x773cc908 download.c (1998) [29 s]: data size: 0x00005000 (20480) byte (s) download.c (1999) [29 s]: header size: 0x00000322 (802) byte (s) download.c (2000) [29 s]: type: 5 (Branding Image) download.c (2001) [29 s]: CRC32: 0x79baadb8 download.c (2004) [29 s]: signature [0] length: 256 download.c (2004) [29 s]: signature [1] length: 256 download.c (2004) [29 s]: signature [2] length: 256 download.c (2011) [29 s]: SHA1: 5e7295bbb5f0f6964f9b4d0138ac2a4f1650b45f download.c (2014) [29 s]: content: Cramfs download.c (0827) [29 s]: Matching / dev / mtd3 to 'branding' download.c (3089) [29 s]: Preparing to flash block # 3 ('branding') to '/ dev / mtd3' ('branding') ... download.c (1009) [29 s]: Flash SHA1: 5e7295bbb5f0f6964f9b4d0138ac2a4f1650b45f download.c (1014) [29 s]: Block SHA1: 5e7295bbb5f0f6964f9b4d0138ac2a4f1650b45f download.c (3107) [29 s]: Content of block # 3 'branding' already in '/ dev / mtd3' ('branding'). Skipping ... download.c (3153) [29 s]: Successfully flashed block # 3 ('branding') to '/ dev / mtd3' ('branding') download.c (3715) [29 s]: Successfully wrote version 5.22654.180921 to file "/ tmp / version". download.c (3724) [29 s]: Successfully wrote upgraded url file: ///tmp/sda/firmware.bin to file "/ tmp / upgraded_url". download.c (0607) [29 s]: 100% Firmware successfully updated # fw_setenv forced_middleware_url http://stb.smlbox.tk:80 fw_setenv: can't open '/ dev / mtd6': Permission denied # fw_setenv firmware_version 6.0.0 fw_setenv: can't open '/ dev / mtd6': Permission denied The result at the end is always the same: fw_setenv: can't open '/ dev / mtd6': Permission denied and when you start again is firmware from RT Post has been editedMondee - 07.10.18, 09:46
	Forum: Media consoles В· View message: #77721592 В· Replies: 20382 В· Views: 4550938

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.10.18, 09:35
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Re.gid @ 10.10.18, 11:27 Poppy address or serial changed? no, there are relatives
	Forum:Media consolesВ· View message:#77721800В· Replies:20382 В· Views: 4550938

Smartlabs SML-482 HD Base (Rostelecom) [Other OS], [IPTV] [STB] [BCM7230]

Mondee View Profile Find member's topics Find User Posts User messages in the subject	04.10.18, 19:18
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Dear Gurus, please tell me the prefix with the SL-IPTV002_123_D card when trying to flash MOYO, it displays the following message: # fw_setenv forced_middleware_urlhttp://stb.smlbox.tk:80 fw_setenv: can't open '/ dev / mtd6': Permission denied accordingly, after a reboot, it remains on the RT firmware. Is it somehow being treated? Thanks in advance
	Forum:Media consolesВ· View message:#77651648В· Replies:20382 В· Views: 4550938

Leo and Tig [3D], [Adventure] Adventure

Mondee View Profile Find member's topics Find User Posts User messages in the subject	11.03.18, 19:48
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	asuskey wrote everything correctly. The new version has a cache in the com.imult.leoitig folder With this cache, mods do not start, just a white screen. I just tried all the installation options myself. The result is a white screen.
	Forum:Quests, adventure, RPGВ· View message:#71224783В· Replies:232 В· Views: 72131

MINI 0826, minirection

Mondee View Profile Find member's topics Find User Posts User messages in the subject	19.12.16, 06:34
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Something on my 0826 with power trouble. Meals are served at the base, the regiment is inserted into the base. In the off state, the red indicator is on - charging is in progress. I turn on the registrar, it starts flashing blue, it is recording, charging is not going. If it is enabled through the base, then charging does not go, so it should be? If the power is supplied directly to the regak, it flashes red and blue, charging and recording go, but the gps does not fry, but this is understandable, there is no voltage at the base. At 0801 there was no such problem, at the same time charging and recording went on while feeding through the base. How to make so that on 0826 through the base was charging during the work of the regiment? Is this a software problem or should something be soldered in the database? What will happen if both the base and the region are powered at the same time? Thank you all for the answers.
	Forum:DVRsВ· View message:#56268837В· Replies:718 В· Views: 105327

Xiaomi Redmi 4 Prime - MIUI Firmware

Mondee

15.12.16, 06:25

Local

[offline]

Group: Friendssavagemessiahzine.com
Messages 237
Check in: 22.12.10
Xiaomi Mi 2S

Reputation:

First screen

After clicking Flash again

Forum:XiaomiВ· View message:#56135145В· Replies:27030 В· Views: 12208620

Xiaomi Redmi 4 Prime - MIUI Firmware

Mondee View Profile Find member's topics Find User Posts User messages in the subject	15.12.16, 05:17
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	I will continue the descriptionOwn problems. The body is in an incomprehensible mode. There is no reaction to the buttons at all. The screen is off, there is no vibration, the indicator does not flash. When connected to a computer, it is defined as Qualcomm HS-USB Diagnostics 900E. Long holding the power button in this mode leads to the fact that the body of Qualcomm HS-USB Diagnostics 900E disappears from the system and immediately appears again, but maybe on another COM port. Shutting down the green and black cable one time results in the same, i.e. disappears from the Qualcomm HS-USB Diagnostics 900E system and it appears when the contacts open. Shorting the contacts when pressing the buttons (1,2,3) is no different, all the same, Qualcomm HS-USB Diagnostics 900E disappears and reappears as soon as you open the contacts. I tried to manually roll firewood from Qualcomm HC-USB QDLoader 9008, got up. The body appeared in MiFlash, but with firmware it gives the following: [0.02 COM10]: [COM10]: start flash. [0.02 COM10]: received hello packet [0.03 COM10]: donwload programmer C: \ XiaoMi \ markw_images_6.11.24_20161124.0000.00_6.0_cn \ images \ prog_emmc_firehose_8953_ddr.mbn [0.03 COM10]: sahara read end error with status: 9 [0,04 COM10]: sahara read end error with status: 9 if after that you press flash again, it will exit: [0,00 COM10]: [COM10]: start flash. [2.01 COM10]: cannot receive hello packet, MiFlash is trying to reset status! [4.51 COM10]: cannot receive hello packet, MiFlash is trying to reset status! [7.02 COM10]: try to reset status. [7,02 COM10]: Switch mode back [7,02 COM10]: cannot receive hello packet, MiFlash is trying to reset status! [7.03 COM10]: The object reference is not specified in the object instance. On the adb command, the answer is: error: no devices / emulators found, when requested, adb devices displays an emptiness. On the fastboot command, the answer is:<waiting for any devices> Via QFIL log: Process Index: 0 Programmer Path: C: \ XiaoMi \ markw_images_6.11.24_20161124.0000.00_6.0_cn \ images \ prog_emmc_firehose_8953_ddr.mbn Image Search Path: C: \ XiaoMi \ markw_images_6.11.24_20161124.0000.00_6.0_cn \ images Please select the XML file Start Download COM Port number: 4 Switch To EDL Download Fail: System.Exception: Failed to Switch to Emergency Download mode in QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL () in QC.SwDownloadDLL.SwDownload.SwitchToEDL () Download Fail: Switch To EDL FailSystem.Exception: FireHose Fail in QC.SwDownloadDLL.SwDownload.SwitchToEDL () in QFIL.Tech.DownloadTech.SwitchToEDL () Finish Download Experts tell me where to dig? Post has been editedMondee - 15.12.16, 05:48 Reason for editing: added QFIL
	Forum: Xiaomi В· View message: #56134761 В· Replies: 27030 В· Views: 12208620

MINI 0826, minirection

Mondee View Profile Find member's topics Find User Posts User messages in the subject	14.12.16, 10:44
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	MonDee @ 12/14/16, 07:05 I can not find satellites. In general, I remove the question on satellites. Found after 1.5 hours of skating around the city. This is a super cold start, longer I have not met. Now the satellites are caught when turned on after 2-3 seconds. The only thing that strains, on average, once every 3 minutes, there is a gap in the code of coordinates for a few seconds, but the speed is correctly reflected.
	Forum:DVRsВ· View message:#56104219В· Replies:718 В· Views: 105327

MINI 0826, minirection

Mondee View Profile Find member's topics Find User Posts User messages in the subject	14.12.16, 05:05
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	RIV @ 12.12.16, 01:15 battery included or from the charger? From the charger through the pad I connected, of course, the satellite is lit on the screen with a red mark, such as I can not find satellites. When you connect to the BB video there is, the zhps is empty. [email protected], 01:32 Maybe it's better to try to catch a GPS on the street, but not to write a product and return it while the protection is in effect? Is the battery normal, alive? Change the flash drive "try", what else remains? Duck like that at the window, that on the street through the glass in the car - I do not see the difference. The sky is clear satellites from the window without obstacles should be seen. Akkum alive. USB flash drive to change? o.O what will give? [email protected], 01:44 Who has new versions, lay out. 20161110v2.rar(12.45 MB) Backup 20161110v2 Post has been editedMondee - 14.12.16, 05:05
	Forum: DVRs В· View message: #56098901 В· Replies: 718 В· Views: 105327

MINI 0826, minirection

Mondee View Profile Find member's topics Find User Posts User messages in the subject	13.12.16, 22:12
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Hello. I bought on Ali 11.11 a mini 0826 with a filter, a hard disk drive and an 8GB flash drive, today I received it. Turned on to try at home, waited for half an hour at the zhps window, tried to set different shooting modes, and did not wait ((((Before that, there were 0801 ducks where satellites were caught instantly, but died, this one was replaced. The firmware from which came fw 20161110 v2. 0 Dump made, if you need someone, I can lay out. Is it worth reflashing? Will the firmware upgrade solve problems? And if it is worth on what firmware?
	Forum:DVRsВ· View message:#56092401В· Replies:718 В· Views: 105327

В® Network Signal Guru, Mobile Network Monitoring Software

Mondee View Profile Find member's topics Find User Posts User messages in the subject	13.12.16, 17:10
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	jimm031, Both slots 4 g is for sure. In lx I did not find the toggle switch 4g, I rummaged all the services. Make someone a screen where to look for him and how he looks
	Forum:Internet and communicationВ· View message:#56081609В· Replies:1282 В· Views: 285137

В® Network Signal Guru, Mobile Network Monitoring Software

Mondee View Profile Find member's topics Find User Posts User messages in the subject	13.12.16, 07:41
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	jimm031, Yes, I also found that tele2 gang20, Beeline gang7. Simka Beeline changed, nowhere is gang visible7 (( ttb I tried, there is no result. Apparently 4g from Beeline is still a rarity with us.
	Forum:Internet and communicationВ· View message:#56064214В· Replies:1282 В· Views: 285137

Xiaomi Redmi 4 Prime - Discussion, Smartphone, 5 "

Mondee View Profile Find member's topics Find User Posts User messages in the subject	12.12.16, 18:35
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	Made a sandwich, it turned out 0.9mm thick in the center and 0.6 at the edges. He entered sooo tight, even had to put a lot of effort. I think 0.9 is the maximum. For those who will make a sandwich, I advise you to try to make 0.8 or even less. I donвЂ™t know how to get mine yet, but I donвЂ™t foresee a need in the near future ..
	Forum:XiaomiВ· View message:#56048459В· Replies:28970 В· Views: 7345877

В® Network Signal Guru, Mobile Network Monitoring Software

Mondee View Profile Find member's topics Find User Posts User messages in the subject	12.12.16, 11:33
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	CiJay Duck here and I want to know. If this is a motive, then it is clear that thereвЂ™s no reason for me not to be my operator. Why is there no Beeline and tele2? Are they both on gang20 in Yekaterinburg? There is no gang on the body.
	Forum:Internet and communicationВ· View message:#56034154В· Replies:1282 В· Views: 285137

В® Network Signal Guru, Mobile Network Monitoring Software

Mondee

12.12.16, 11:01

Local

[offline]

Group: Friendssavagemessiahzine.com
Messages 237
Check in: 22.12.10
Xiaomi Mi 2S

Reputation:

Hello, help me figure it out. Phone xiaomi redmi 4 prime. There are two sim cards, OPSOS Beeline and TELE2, the city of Yekaterinburg. In the network settings it is "preferably 4g", but I have never seen the 4g network. The maximum is H +. Launched the program, issued the following result:

If I in the settings of the engineering menu forcibly put the network "only LTE", then I get the following picture:

That is, the phone sees some 4g network, but does not register in it?
Is this my FPIC in which I can not register? Or it can be shown all the networks of all OPPs, and this will not let me because it is not mine?

Forum:Internet and communicationВ· View message:#56033232В· Replies:1282 В· Views: 285137

Xiaomi Redmi 4 Prime - Discussion, Smartphone, 5 "

Mondee View Profile Find member's topics Find User Posts User messages in the subject	07.12.16, 18:11
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 22.12.10 Xiaomi Mi 2S Reputation: 28	drez The developer 61124 writes for two days in a similar way that something is being backed up, but nothing is buried
	Forum:XiaomiВ· View message:#55873369В· Replies:28970 В· Views: 7345877

Xiaomi Redmi 4 Prime - Discussion, Smartphone, 5 "

Mondee

05.12.16, 09:22

Local

[offline]

Group: Friendssavagemessiahzine.com
Messages 237
Check in: 22.12.10
Xiaomi Mi 2S

Reputation:

Titan04 @ 12/05/2016, 08:51

merin12426 generally as a dead man cold even under load.

This is exactly how I did not strain it, I did not see it above 38 degrees. Standard 32-35 degrees.

This is when surfing for more than an hour, flash, video.

Post has been editedMondee - 05.12.16, 09:27

Forum: Xiaomi В· View message: #55783698 В· Replies: 28970 В· Views: 7345877

9 pages

1 2 3 4 5 6 > »

mobile version

Now: 02.06.19, 05:54

©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com^®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement

Forum IP.Board © 2019 IPS, Inc .

ads