Rep: (23)
Thank you all!
I'll go to Mission
Selenishe, I will check the motors, but nobody touched them, the body is still alive (the crack on the lid of the GPS mast does not count)
Khezu @ 04/11/2016, 19:37*
I always do the first test take-off with standard screws, for not killed ones.

2 sets have already been bought in addition =) did not survive acquaintance with dacha plants, and thrust on black 9s more: blush:



Rep: (23)
Good day to all friends!
I got the copter after hibernation, went out to the field, put the screws - nines, my own battery, calibrated the compass and when taking off the front pair of engines pulls harder than the back, as a result - the curtain during takeoff. I suspected the screws, changed to relatives, as well. I changed the battery to an enlarged one (I thought, what if) that did not help. Disassembled, carried home.
Question: Does Mission Glider help me?
or where should I dig?
If viewed in the subject - sorry!



Rep: (23)
* KZ79, thanks, leg is understandable.
KZ79 @ 12.12.2015, 22:04*
On the screws, there is a whole set of 4 pieces

Apparently I will have a spare set =)))

What about temperatures? not cold to him? suddenly there, I don’t know, the lubricant in the motors is getting thicker or the board is going crazy?



Rep: (23)
Good day everyone !!

And what are the operating temperatures for Cherson flights?

KZ79, and to attach these legs to the quadric as you plan, the photo is not very clear. I myself think tightly about such legs. and by weight, relative to relatives, much heavier?

Admoder @ 11.26.2015, 18:52*
I took these

I correctly understood that in the order one screw is left and one screw is right, that is, do you need 2 to take the whole quad?

Post has been editedKomarichevSergey - 30.11.15, 13:27



Rep: (23)
KomarichevSergey @ 10.20.2015, 11:54*
about Windu - from reviews I saw that 8.1 is more stable and holds the battery longer.
By the way, someone in the subject changed 8.1 to 10, describe whether it makes sense to take 8.1 or fear 10 is contrived.

And yet, can someone tell a normal seller / store to order glass on the screen?
and is there a case on sale for this type of cubesuch aThat is not as fat as a native?
There is a couple of Power Bank of large capacity, but there are only usb outputs, maybe someone already found a cord for the tablet’s mobile power?
: thank_you:



Rep: (23)
* Greg388, OK.
about Windu - from reviews I saw that 8.1 is more stable and holds the battery longer.
By the way, someone in the subject changed 8.1 to 10, describe whether it makes sense to take 8.1 or fear 10 is contrived.



Rep: (23)
* Greg388,
I wrote a question there about Windu and about availability, if they answer yes, I will take it there.
So far they have not let me down - not advertising, I know the negative experience.
On the forum I saw somewhere a representative of this store.



Rep: (23)
Greg388 @ 10.19.2015, 17:31*
http: //ru.aliexpress.c....140&shopNumber=1818735who didn’t take here? cube (10.6) + keyboard + handle 28300 comes out. Worth win10

reviews are certainly good, butSet 2costs 445 dollars lookhereat "Buy Together & Save "



Rep: (23)
Good day,
I thought about buying a Cube i7 Stylus, read the last few pages and sadness fell on me ...
Does it make sense to order (I thought about GearBest / geekbuying / banggood), are there any successful examples of adequate delivery?
Have you solved the problems with the license for Windows (I want 8.1 to order)?
Immediately I think to get a cover (NOT Claudia, there is a blue-tooth at home), a protective glass, the stylus is in question for now.
Now I will write in GB (I often buy there) a question about Windows in parallel, I will listen to them again.



Rep: (23)
Good afternoon, pilots!

Over the weekend, I broke 2 propellers and so for myself I did not understand why o.O

I will try to describe:
I assembled a quadric with a large battery (3000), calibrated the compass, took off, flew, accidentally tested the quadric return when the remote control was turned off - everything is ok, the compass also calibrated correctly, it flew back: D
then Yi fastened to the standard suspension in the aqua box and} -) moved into the quad - when taking off there is a clear imbalance in the propulsion of the screws - the front pair pulls harder. I thought that the battery has shifted back and outweighs, rearranged it. a new launch is the same story. I thought I give little speed, succumbed and ... -2 propeller: blush:

What is wrong with my actions or quadra?
There are spare propellers, so it’s not a great replacement for them, it’s sad that the aerial filming of kebabs has failed: resent:



Rep: (23)
Lace included) For the full camera only, you need a microUSB AV output)

About how))) Well, Xiomi is on hand)))
I look forward to review, and I will order)))



Rep: (23)
I'll add a review soon

I'm waiting =)
To complete the set, only the cord transmitter-camera need to be purchased? or have you forgotten something?
And then it will be insulting
: thank_you:



Rep: (23)
I thought up to put FPV, Xiaomi will be as a camera.
Advise:
take a kit right away for examplesuch+ cord transmitter-camera
or separately as in 2 reviews from the author of the topic;)?
It is desirable to direct links =) do not restrain yourself =)
It would be desirable reliably, simply, and, preferably, not expensive.
thank
: thank_you:



Rep: (23)
* lomanosik,
at the top of the legs there are cut-cuts for the institution of wires, after electrical tape / clamps.
Bolts for mounting with a large plastic head of white color, I had a separate bag in a box with my legs.



Rep: (23)
Krava33 @ 09/10/2015, 21:39*
I advise you to change to phantom

This is a thought)))
2 questions:
1. without shamanism, they will not stand?
2. Is there any hope for a link? =)<== kind of foundbut there clearly needs to be shaman and still it is better to add a soft one to the very line of contact with the ground. butsuchWill not it be better? It seems that the camera should not interfere, and the height is good
: thank_you:

Post has been editedKomarichevSergey - 11.09.15, 12:38



Rep: (23)
I forgot to share the joy))
My Cheerson arrived, and on the very first launch, landing, caught the wind and ... a broken leg in three places. Glued with glue-gel, secured with super material - blue electrical tape: rolleyes:
then he attached a soft paralon to his feet, now he jumps funny when landing =)
new legs are going, the camera is going.
Now we need another tracker, suspension, and fpv to order. but this, apparently, for the next season.



Rep: (23)
* modder_sanya, on dzhearbest were 9 "and plastic and carbon. Until I decided to learn from stock =)



Rep: (23)
Krava33 @ 07.27.2015, 16:16*
I will try to make my own video on this topic.

it would be great!! : thank_you:



Rep: (23)
Krava33 @ 07/23/2015, 11:35*
brains yes - slightly corrected the maximum angles of deviation, since in stock it is difficult for him to fight the wind.

But there is a link to read, see how and what they recommend to change? otherwise I will find the wind :)



Rep: (23)
* krava33,
By the way, I wanted to ask everything. and you changed the blades on the copter to carbon 9-ki, and did you get into the brains?

Full version

Help     rules

Now: 08/01/19 22:18