Rep: (2)
Hello. What could be the reason that the VORKE Z5 firmware does not connect the prefix with the access point created by the iPhone? Writes saved but can not connect. There are no problems with other networks.



Rep: (2)
Good afternoon, I recently bought a prefix, I tuned almost everything for myself, but a couple of questions remained.

1. No updates came over the air, the firmware is 2017.
2. The replacement of SystemUI.apk for the appearance of navbars did not work.
3. Splitting the screen works somehow clumsily, the second application becomes inactive.
4. She constantly writes that there was a malfunction in the Play Market (although it may have appeared after deleting the native applications)

Who thinks about this?

Post has been editedKolan91 - 25.10.18, 10:56



Rep: (2)
* Alex_SAV, in my suspension where the dampers were nepropay



Rep: (2)
* Rafaellito ,
There was the same problem only with novya, fault in the kdron suspension connector, banal poor contact, scroll through the topic back to pages 10-15 there, I posted the photo.
K
Read the forum rules, in particular p.4.19


Post has been editedZlisten - 05.04.18, 11:19



Rep: (2)
Well, probably the end of 2017, if so, at the end of December I received it, and not of any marriage.

I made an order in December, the number 22, but he came in January 18-19



Rep: (2)
Won the same problem NO CAM
As it turned out, the problem is not software but mechanical. Bad contact in the adapter from the camera to the copter. The video was not there, it turned out either you insert the camera during the assembly, there was contact, or if you were not lucky, then it was not. What prompted the disassembly was the fact that once upon pressing the suspension the video appeared. I disassembled the adapter, rang the loop, 10 out of 10, and they’re already coming to the comb 8. Having disappeared the board from behind, the contact appeared, just in case, it disappeared and everyone else. When connecting, I immediately asked what new software came out and then I realized that everything was ok) I am applying the photo. If the curator finds the info useful, you can pin it in a hat, because there is a suspicion that this is a party tank from the gerberst of the end of 2017.
Attached Image

Attached Image

Attached Image


Post has been editedKolan91 - 23.03.18, 23:02



Rep: (2)
I confirm that it works, then the request is id id and everything seems to be ok



Rep: (2)
Hi, there was one more question: during unlock via ICCID can ios be updated or not? Or is it better to do this before the SIM card firmware? (Now 32 firmware is installed)



Rep: (2)
Perervin @ 03/03/18, 19:12*
On firmware v2 or on v1c (preferably on v1c) except iccid it is unnecessary to specify anything!

thank



Rep: (2)
In order to avoid unnecessary questions after the appearance of the code, the sixth Givayka to sew on which firmware and what data in the program to hammer in addition to ICCID?



Rep: (2)
nmka55 @ 03/01/18, 23:31*
Buy aio6. Mood v35, imsi 310410 guide2 a2
Put aio6 on the phone. Wait, don't do anything. The activation screen itself disappears. Reboot the phone and everything is OK

And what is a significant advantage over 32 firmware? it is clear that she is the last (captain evidence) but they advise exactly 32?



Rep: (2)
ShapeR1 @ 03/01/18, 11:25 PM*
No, this specifically refers to the S2388 US Loaner & Service Picker policy - iPhone 7/8 / X - Eureka, which activated normally at 10 and stopped at 11 to 11.2.5.

The question is removed, otherwise I was really happy



Rep: (2)
ShapeR1 @ 03/01/18, 21:26*
And from 11.2.5 it became so that when loading, instead of the list of operators, there was exactly 1 operator, you select it and everything activates normally without any errors and works like a non-wizard. But what will happen next with new versions of iOS no one knows, maybe there will again be an error)
So it turns out it’s kind of not officially locked, but it was not activated earlier due to an error.

Do you put forward the theory that on this version of the axis you can activate a locked phone?



Rep: (2)
PlanetDuck @ 03/01/18, 11:57*
Check 34 more.

turned on 32 data roaming everything went well, there is dialing in LTE, as I understand it, ONLY in 3G there are no incoming calls? THOSE. if you turn off the choice of 3g and so that 4g immediately fell in 2g can you always get through?



Rep: (2)
I installed firmware on iPhone 7 from sprint 32, it will work for verification, but there is no Internet, how can I get at least 2 g to work?



Rep: (2)
PlanetDuck @ 02.28.18, 9:29 p.m.*
change to 32nd, imsi 310120 guide2 A2
and so far so. And how will iccid come out - change to B2

V32 - TMSI-unlock without incoming calls with 3G enabled
Will those calls not come if you turn on 3G?



Rep: (2)
A set of Giveyka 6 with a promoter came from the multisim site, I insert it into an iPhone, turn it on, it still writes an invalid sim. ICCID is changing, can an old invalid activation method be hammered into a giveaway? Phone iPhone seven locked under the sprint, my SIM card.



Rep: (2)
Kolan91,
None

Thanks for the answer.



Rep: (2)
iphone 7 sprint and givey aio 6, after the initial activation, what kind of unexpected people can be and the phone will again stop seeing the SIM card, if I’m not going to change the SIM card and do the reset too?



Rep: (2)
Now I google it, iphoneimei.net is untying the sprint and judging by the reviews it is. Or have you physically covered the shop and you shouldn’t even try it?

Full version

Help     rules

Now: 08/27/19, 3:24 PM