Rep: (72)
DiscussionACME TB806 Rocket quad core tablet
PictureACME TB806 Rocket quad core tablet
Discussion пїЅ

  • Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  • To discuss and search for third-party programs / games, use the following sections: Programs and Games .
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  • The results of performance tests of Android devices, see the topic: Benchmark
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.


Additional photos
Attached Image

Attached Image
Attached Image
Attached Image

Specifications:
Processor: Allwinner A31s 1,2 GHz x 4
RAM: 1024 Mb DDR
OS: Android 4.2.2
Hard Drive: 8 Gb SSD
Memory card support: microSD up to 32 Gb
Display: 7. 85 ", 1024x768, TFT IPS
Wireless: Wi-Fi (802.11 b \ g \ n), support for USB 3G adapter
Intereysy: Mini-HDMI (C), micro-USB (B), 3.5mm audio output
Battery: Li-Ion 3500 mAh
Screen rotation g-sensor
Speaker, microphone with recording function
Rear camera / front: 2Mpx / 0.3 Mpx
Video: RM, RMVB, AVI, MOV, WMV, MP4, ASF, 3GP, TS, MKV, MPEG, etc
Audio: MP3, WMA, WAV, APE, FLAC, AAC, OGG, etc.
Images: JPG, BMP, PNG, TIFF
E-books: TXT, PDF, CHM, HTML, PDB, UMB, FB2, LRC
File Support: Word, Excel, PDF
Body: aluminum
Dimensions: 0.68x20.1x13.73
Additional Information:
Firmware
Root
Instructions

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.
M
The topic is closed due to lack of interest from users.
If you want to add something, clarify, etc. - do not create a duplicate, click the Complaint button, so that the moderators would open the topic and indicate the purpose in the comments.


Post has been editedvelikashkin - 30.11.16, 08:33
Reason for editing: Reduced to standard section



Rep: (72)
Firmware from Alcatel OneTouch POP C3 / 4033D


Firmware


Instruction
• Download FlashTool from the header.
• Download firmware
• Unpack the firmware in the folder FlashTool
• Install the driver on the body both in the on and off state (if not
installed)
• Disconnect the phone from the computer and pull the battery
• Start FlashTool and click Scatter loading,
• Select the scatter file from the folder with the firmware.
• Next, pick custpack.img manually, and leave the uboot line as it is.
It should be like this
Attached Image

• Press Download, immediately connect the switched off device - the firmware should go. Green circle means successful execution.
• Since the firmware is actually a backup, in the case of a bootlap after flashing, you should perform a wipe, in recovery.



1. When rebooting, the vibration does not crash
2. Auto brightness now works more or less correctly.
3. The touch works a little better, without patches and calibrations by the way.

Otherwise, a full copy of the firmware from Optima


Thank you for the merged stockwerewolf-hell


Discussion of how and how to solder the symprimer only in the subjectMegaFon Optima - Discussion
.

Post has been editedsnekt @ - 29.06.16, 17:23
Reason for editing: Raised in the topic header.



Rep: (72)
Regarding the second sim, I can say that some particularly direct-handed and respected forum users managed to launch two SIM cards only in the Megafon + Megafon version.

From the correspondence, I understood the following: that the code affecting this business is hidden there, from where it is possible to extract it only by means of the programmer, and to correct and drive it back is generally a war and the Germans.

ps If someone has something to refute this info, I will gladly correct it.


Post has been editedJuggernaut - 12.06.14, 22:57



Rep: (72)

It is necessary to install in the mode without checking the signature of the drivers, otherwise they are not installed.


Here are the dravishes on the Preloader for all windows and without dancing with a tambourineAttached fileMT65xx + Preloader.rar(12.64 KB)




Rep: (72)
DEV1M41K,

I got through the CTR norms.



Rep: (72)
troopseek,

Unpack thisBoot & Recovery Repack for WindowsBoth boot.img will find everything there. Just rename one bottle, for example, lewa.img and the second one to stok.img so as not to get confused and there is no coincidence of names.


Post has been editedJuggernaut - 11.05.14, 09:52



Rep: (72)
troopseek,

As an option, throw the boot.img kernel and kernel_header from SW_17 into lewa. As with the Lewa port, additional frameworks are written in init.rc, then when the boot.img is completely replaced, the bootlap is inevitable.



Rep: (72)
War Shadow @ 05/10/2014, 19:10*
with next they start flying again


Most likely it's in Windows.
War Shadow @ 05/10/2014, 19:10*
that there is no this driver then disappears and the phone goes to charge


At all MTK so, you have to catch the right mouse button until it appears.



Rep: (72)
Recover after unsuccessful experiments.


1) Download FlashToolAttached fileFlashToolMod.zip(14.02 MB)
and firmwarehttp://yadi.sk/d/i-9iRoOJN9YKe
2) Unpack the firmware in the folder FlashTool
3) Install the driver on the body in the on and off state (if not installed)
4) Disconnect the phone from the computer and pull the battery.
5) Start FlashTool and click Scatter loading, select the scatter file from the folder with the firmware.
6) REMOVE THE GALLERY WITH PRELOADER. (If not removed, you can zakirpichit completely and irrevocably)
7) Click Download, immediately connect the switched off device - the firmware should go. Green circle means successful execution.
8) Turn on and enjoy.

K
Added to the header


Post has been editedmfss - 24.04.14, 22:50



Rep: (72)
lokoyarr

Updated the link.



Rep: (72)
• DownloadFlashTool.zip
• Downloadfirmware
• Unpack the firmware in the folder FlashTool
• Install the driver on the body both in the on and off state (if not
installed)
• Disconnect the phone from the computer and pull the battery
• Start FlashTool and click Scatter loading,
• Select the scatter file from the folder with the firmware.
• REMOVE THE GALLERY WITH PRELOADER. (If it doesn’t help, please tick the preloader with a checkmark)
• Press Download, immediately connect the switched off device - the firmware should go. Green circle means successful execution.
• Since the firmware is actually a backup, in the case of a bootlap after flashing, you should perform a wipe, in recovery.

Post has been editedJuggernaut - 24.04.14, 16:48



Rep: (72)
And who ever tried thisВ® SWAPit RAM EXPANDERand especially this revisionР’В® SWAPit RAM EXPANDER (Post # 17823985)There swap a lot on what they screwed where it should not be.

ps I can’t check my uno to the mercy of my nephew, but I follow the topic of good memory.


Post has been editedJuggernaut - 22.04.14, 21:19



Rep: (72)
1nt3rf4c3,

The fact that this is primarily from heating is unreasonable, but the nameplate is the first time I saw it on BASIC. The conclusion is obvious.



Rep: (72)
After the firmware on sw13, I caught the dump of the communication module, and by itself, imei flew. The firmware and other dances with a tambourine described in the topic did not help.

Problem solved so.
1) Delete the entire nvram folder at / data / nvram / md / using any root file manager. (the system will compile it again)
2) We reboot the device. (After rebooting, the communication module miraculously appears)
3) In a pre-setMTK Droid Toolsprescribe for15 digits of your imei in the corresponding paragraph (look for imei under the battery).
4) We reboot and rejoice.



Rep: (72)
1nt3rf4c3,

I tried to collect at least stock, going without errors but does not work. Alkateli are famous for their curved source code.


Post has been editedJuggernaut - 15.04.14, 16:01



Rep: (72)
Darth_alexx,

Uboot is not there in principle, but Custpack must be hooked manually. After installation, do wipe in recovery.



Rep: (72)
zelon72,

Optim, 4033 (all) and the j330 are manufactured by TCL. The firmware from these phones fit together without any changes.



Rep: (72)
There is pro_info from TCL j330 if there is a kamikaze with a second SIM receiver then I can share it.



Rep: (72)
svevas

All the same as on custom, a notification pops up that there is no second sim.



Rep: (72)
dead315,

You need to click on the entire line and pick up a bushpack and not just put a tick.


Post has been editedJuggernaut - 14.04.14, 21:45

Full version

Help     rules

Now: 08/03/19 16:54