Rep: (25)
* shuchvadim sorcerer, I just saw it better with that.
Replaced the bottom board. For the price of a usb cable, the delivery is the same, so I took two at once, a copy and an original (copy for experiment). To this day, the copy is working, the original is lying in reserve. Substitution, business for ten minutes.



Rep: (25)
What is wrong withAtomic pithat so little information about him on the network? The forum did not even mention it. Iron seems to be quite interesting, and the price is quite sane.



Rep: (25)
* OOOPS2010,
As an alternative.
I don’t remember where I met this recommendation, maybe even in a hat.
In the settings of the Apps & notifications phone, at the bottom Advanced, App permissions, then at the very bottom of the Spoof package signature, there is a Show system ellipse at the top right, and click the Fake Store (Plya Store or whatever will happen, depending on the choice during installation).



Rep: (25)
Perhaps not quite in the subject with such a question, but did not know where to turn better.
Subject, first revision, firmwareRT-N56U_3.4.3.9L-100_af9d79b collected by a friend prived1960 .
Actually to the point. After several connections, it ceases to connect via ssh to the router. Connection by keys, in the settings of the router authorization only by keys. Protection against password guessing is also included (by the way, there was still a question, is this protection necessary if authorization is only using keys?). And by the method of exclusion, the culprit was discovered, blocking the connection via ssh with keys, namely the very protection against password cracking. That is, disabling it, authorization passes as many times as you like, turning it on after three successful logins using the key, stops connecting (reconnecting the smartphone to the mobile network, thus changing ip, you can reconnect). So the question arose, is this normal?
PS: I don’t know if it is critical, Entware is enabled, openssh is not installed, I use the dropbear preinstalled in the router.

PS: PS: I forgot to clarify that this only happens when connecting from the outside, that is, the firewall blocks the connection.

Post has been editedJekaSs86 - 12.05.19, 17:04



Rep: (25)
There was a desire to organize backup from all devices to "your cloud" (Asus RT-N56U with Padavan + a couple of USB HDD), and from this "cloud" backup to full-fledged cloud services, such as Google Drive or OneDrive. I don’t quite understand if GoodSync can be deployed on a router, so I tried to set up synchronization on a PC with Windows from my own cloud in OneDrive. Actually the question is - with such a scheme, what kind of participation does the PC take? In the sense that the hard and ssd on the PC are silent, that is, there is no load on them, the percent is also not loaded with GoodSync, but the traffic goes to the maximum, almost the entire channel is raked (not critical). That is, everything that is used in this case, only the network card is used for this synchronization (well, is the scanty load on the rest of the iron?)

For efficient answers with me pros



Rep: (25)
JekaSs1986 @ 06/18/2018, 13:34*
Smart does not see the connection to the PC via USB, but is charging from it. I tried different USB to PC, different PC, different cables, including the original.
What are the chances that replacing the module (board) with microUSB will solve the problem?

Replacing the bottom board with usb helped. 100 UAH and 10 minutes, business then.
Pleased with the screws for a Phillips screwdriver, Torx did not take. In general, judging by the internal phone, the phone is very maintainable, which is good news.
PS: a strange moment, after replacing the board I couldn’t enter the TVRP, the pincode didn’t fit (encryption is turned on), so the date could not be mounted and could not even be formatted (date format), while the phone turned on and the pincode unlocked it. I requested the stock via fastboot, after LOS, turned on encryption, because for some reason it didn’t turn on immediately with the firmware, the pincode in the TVRP started working normally. Perhaps not connected, but manifested itself after replacing the board.



Rep: (25)
Smart does not see the connection to the PC via USB, but is charging from it. I tried different USB to PC, different PC, different cables, including the original.
What are the chances that replacing the module (board) with microUSB will solve the problem? Or is the matter deeper, and there is no point in trying to fix it yourself?
The device is still under warranty, but there is no desire to remain without a phone, as practice shows, for a month or more.
Sinned on the software part, alas.
With the advent of LOS 15.1 official, I requested it after the drain (MIUI). Recently I began to notice that when charging from the Verbank (Xiaomi), the smart starts to charge when connected, and after about ten seconds, it stops, a couple of reboots and charging started. Later it was necessary to throw files on it with OTG flash drives, I did not see it, okay! Booted into TWRP decided to drop it there and OTG does not detect there. I forgot it, sinned on the line, because it is Treble, maybe there is a problem with some driver in the vendor section, I thought about doing it later.
There was a time, I decided through fastboot to return the device to the drain, when connected to a PC, there is no reaction, it does not matter which one. I tried to restore the Cust (Vendor) section from MIUI from backup, and naturally MIUI itself, to no avail.
With grief in half, he returned Cust through some kind of recovery, flashed the extreme MIUI (9.5.11), Magisk naturally, and returned the official TWRP. That is, the phone is by and large completely on the drain, the sense of zero.
Most likely, the installation of the ruler and the problem manifested are just a coincidence.

For good advice, I have a plus.



Rep: (25)
Dcroc @ 09/20/2017, 15:04*
Does this option work for you normally?

Fine. But on firmware for September 11th from HighwayStar.

Post has been editedJekaSs1986 - 20.09.17, 15:59



Rep: (25)
Den @ 178 @ 13.09.17, 20:19*
you have a version from Highway Star, and a person asks about Smoke Lineage 14.1 NB (08.09)

Where did you see this?
The man inserted my nickname, with a link to a post in which the first line says that the version is fromHighwaystar . In his post, nothing is said about what is interested in LOS from the Smoke team. Either you do not understand something, or SiCH_C4 .



Rep: (25)
SiCH_C4 @ 09/13/17, 18:07*
Is YouTube behaving on it? Does the video not slow down? Is there a sync?

All perfectly. As it used to be, at the beginning of 20 seconds jerky, this is not. 1080p is clean, without jerking and desync.



Rep: (25)
Den @ 178 @ @ 09/13/2017, 11:36*
still jumping
For two days, as if he had been in recovery for more than ten times, he did not notice jumps.
The lock screen also hangs the tablet, only reboot. But I need a lock.
I use the lock screen, unlock by pin. The device, as described above, did not freeze and did not go into reboot.
Discharge at night in a case with a magnet.
I use a case with a magnet, that is, SmartCover of. Case from xiaomi, the tablet sleeps and does not hang.

Some kind of random comes out!

Please give a reference to Xposed.

https: //forum.xda-deve...-sdk-25-arm64-t3639221

Roboform application does not start.

I confirm that roboform hangs on the logo at startup.
When you try to delete it, endlessly there is a deletion, after no application could delete, the same situation. I deleted roboform via titanium, after that all applications are normally deleted.

Post has been editedJekaSs1986 - 13.09.17, 13:24



Rep: (25)
According to the latest LOS 14.1 (from 9.11) from a respected comrade* Highwaystar .
The cameras work. Webview applications do not lag and do not hang up the tablet, Google search does not lag, google mail and chrome do not lag and also do not hang the tablet, unofficial. attachmentsavagemessiahzine.comdoes not slow down, that is, webview flies. The discharge is uniform, up to ten hours of the screen (the device is a couple of years old, so the battery is far from the first freshness), it sleeps normally, WiFi does not turn off when off. screen. Random reboots in ~ two days, not a single one. Xposed works with a bang, the main thing you need is a memory swap from XInternalSD. Bluetooth works. Buttons (controls, those that are physical under the screen) do not work after turning off the screen.
The device is fully configured for my needs, not all applications yet, but only those that caused problems (for the test) and those that are of prime necessity, I will deliver the rest later, but I don’t think that something will change.
I don’t know anything about flickering, since I did not see them on any of the firmware for the entire time I owned the subject.
I don’t play games. I don’t use 2gis.
In fact, fully working firmware, without lags and glitches (for ~ two days I did not notice anything).
Put with the help of. TWRP 3.1.0.0 (the battery charge does not jump in it, and the tablet does not heat up). OpenGapps Pico, later I will try the Aroma version of the gaps, so that the memory in the system partition is not empty.
Thanks again,Highwaystar , for working on firmware for our old man.



Rep: (25)
* OLOLOIIIK [A],
Yes, I already saw, I'm sorry. I got into the wrong archive)) In the old one for 07.25.

PS: once again I am convinced that 90% of errors occur due to carelessness or non-compliance with instructions.

Post has been editedJekaSs1986 - 11.09.17, 14:35



Rep: (25)
ArtemkaVZM @ 09/09/2017, 12:42*
1) replace tos.img in our archive with stock
Which way isyourtos.img in the archive? I understand that you are talking about the archive of the latest firmware.



Rep: (25)
About the loss of sound. Then I rolled back to some kind of backup a week ago, the sound did not disappear. In the morning everything was normal, the problem has already resumed. The firmware is clogged with applications and configured.
Broomber @ 08/07/2017, 11:56*
Remove the dmesg log when the sound disappears and post it here.

Attached filedmesg.log(94.34 KB)



Rep: (25)
Pages in the topic are added almost once a day, so carefully following the discussion is problematic, maybe this has already been discussed, therefore I ask you not to rush with slippers.

The essence
On LOS 14.1 from the Smoke team, the sound disappears in any player. Sinned at first on the application that I install after the firmware, but tried on a clean one without absolutely everything (root, gaps, etc.), clean firmware. When you turn off the screen, after about five seconds, the sound disappears, after turning on appears. That is, it is not paused, but the sound disappears. You can not turn on the screen, after five to ten seconds of silence, pause (with the headset remote), that is, pause the music, then play again and the sound appears. It seems that the problem has been resolved, but after, oddly enough, a couple of days, the sound disappears every 30-60 seconds. It is also solved, pause play, but over time it starts to annoy and you have to use a smartphone.

Google search lays down the tablet, is this the norm for extreme assembly? (not sarcasm)
I googled, opened the link in webview, returned to the results, and lags begin that even the screen cannot be cut down, but somehow it gets dumb. The same thing with Google Mail. Whereas an unofficial applicationsavagemessiahzine.comworks great as far as known it requires the same webview.
Another point on the same topic. I decided to try aroma_gapps (installed with the firmware right away) in order to use the entire system partition (less than 100mb left free), everything became and works. But maybe I ticked off somewhere and webview after starting the tablet was not there. Installed from the Market, it works.
Lags of search and mail appeared both on mini gaps and when installing gaps after the initial firmware setup.

And with Smoke TWRP, when installing the firmware, the tablet warms up to 85 degrees. This is only during installation, after and before the standards 41-45.

Yes, I am aware that beta, but on the topic pages a 90% discussion of some kind of flicker and F1xy kernel. All of the above is not a complaint.Highwaystar, DbIm4ikO, ArtemkaVZM, Thank you so much for working on the tablet.



Rep: (25)
Igurys @ 06/13/17, 00:42*
You just need to reinstall after flashing the kernel.

This is logical, because before writing, I checked three times. Also after your post, I tried to install twice, but alas.
Below are screenshots of the installation of SuperSU-v2.82-20170528234214 in TWRP 3.1.1.0

Smoke
Attached Image

Stock
Attached Image


Maybe what other version of supersu works? It’s not critical for me to give permission, supersu or built-in los, just wondering how you did it.



Rep: (25)
At the extreme core of Smoke (1.3.2), the SuperSU root does not work, only from Lineage OS.



Rep: (25)
BeOp @ 02.21.2017, 04:48*
the screen turn-off time is not saved and the turned-off auto brightness is constantly turned on
That is not saved? Not applicable or after reboot? I just checked, the shutdown time is applied and after the reboot it remains the same, I put it for 5 minutes. With auto brightness, I also did not notice problems that the off is saved after reboot, that on is also left after the reboot.



Rep: (25)
Ilya_Ds @ 02.10.2017, 21:59*
Only I have one such problem is observed on the last build of cm12.1: when many applications weigh in the background, does the tablet freeze for a few seconds?
Same. But since no one has unsubscribed before, the problem is more likely an individual, with which it is specifically connected, it was not possible to find out.

Full version

Help     rules

Now: 08/27/19, 2:05 p.m.