Rep: (4)
* Street_Racer, I had to do the scraping, it’s not fate, I ask you to poyuzat



Rep: (4)
Gentlemen, the question was the stock, I decided to try Nitra, Everything was set up without any questions, wiped the android launch - asks to enter the code (I know it) but the keyboard for input does not appear .... what are the solutions
PS the phone does not hang, the emergency call function works, the buttons function. The question is the lack of a keyboard for entering a PIN code



Rep: (4)
Good evening everyone, I have AIPC (extreme version), extreme TWRP. I want to return to stock, but when flashing to stock or to beta (with the same trouble as a ruler), it gives error No. 7 when flashing, who came across how it was treated? :)



Rep: (4)
On the rights of the "firmware theme" I want to express an opinion on the extreme line from 03/28.
So, immediately after the appearance of the OS linagos, I tried to switch to it from off MUAY. Impressions were not very disappointing with the camera, but in the latest version of the firmware the camera was pulled up and it really takes a picture no worse than miui. Yes, it doesn’t take a picture (less contrast), but the quality is definitely not worse.
Lags : definitely there are fewer of them than in off-firmware (I didn’t exactly observe the slowdowns, freezes, and crashes from programs in the line)
Energy efficiency : here I must admit that on MIUI, the operating time in the same conditions of use is longer on average by 2-3 hours (this is due to the apparently more flexible ability to configure notifications and access the Internet in sleep mode)
Usability : of course it’s a matter of taste, but picking a menu is more convenient. If you put a pixel launcher then generally a song
IMHO



Rep: (4)
AlexPashenko @ 03/28/17, 10:03 PM*
format data
* AlexPashenko ,
Is there no standard twrp code? And as I understand it, when performing this operation, the encryption will fall off?



Rep: (4)
People need help. Made device encryption. Now I can’t log into twrp, asks for a password, but the one specified during encryption does not work. Accordingly, I can’t update



Rep: (4)
The people question on the OS line is there the ability to configure the separate power of the vibration of the bell and pressing the buttons (minimum vibration on the buttons, maximum on the call) ??



Rep: (4)
* OrlDim About 30-40% of the charge, I remember I clicked "Download", but did not install it. when pressed and held (any button options), the red indicator lights up. When connected to a PC, it is not detected at all



Rep: (4)
* dukems
not found yet? phone connection is not visible



Rep: (4)
The people were faced with an unexpected hardening, there was an extreme request from MuiPro. In the update section, a new request appeared (as I understood the Chinese one), I didn’t have anything to do, I went to sleep, woke up, the phone doesn’t turn on, the indicator is on (in red) I tried to charge, except for the indicator nothing is lit, I’m not holding any button combinations does not lead: o



Rep: (4)
People, tell me on HTC One Sprint in general, is there any way on lollipop to turn on 3G networks as well as GPS and IR remote control? (edo not offer xorzism ))



Rep: (4)
People, I need help HTC sprint version costs the last stock on lollipop the phone only works in 2g networks. Is there any patch or manipulation with a tambourine to enable 3g so that the firmware would not be demolished



Rep: (4)
Yes, only 2g (gsm) also does not work ir port and gps

Posted on 02/19/2016, 19:40:

Is there any way to enable? (Now there is an extreme stock request on lollipop)



Rep: (4)
people there is a stock updated to the lollipop version only works in GPRS networks, is it possible to fix something like that would work also 3G? (if possible, so as not to demolish, please and stay on the OFF version)

Post has been editedChembirlen - 15.02.16, 21:03



Rep: (4)
*#*#4636#*#*

Why can only TsDMA mode not be saved? what do not choose remains CDMA + LTE + evDo?



Rep: (4)
*#*#4636#*#*

Why can only TsDMA mode not be saved? what you do not choose remains CDMA + LTE + evDo



Rep: (4)
* thiefmaster704, But how to change it to the right one?
I do according to the instructions in the header:
C: \ adb>fastboot oem writecid SPCS_001
...
(bootloader) Start Verify: 0
(bootloader) Input CID is not super CID
(bootloader) Start Verify: 0
OKAY [0.065s]
finished. total time: 0.066s

Annoying inscription "is not super CID"

Post has been editedChembirlen - 07.01.16, 17:45



Rep: (4)
* thiefmaster704,
s off there
writes the following:
zip header checking ...
shift signature_size for header checking ...
zip info parsing ...
checking model ID ...
checking custom ID ...



and just in case


Post has been editedChembirlen - 06.01.16, 23:52



Rep: (4)
People, felts festivals dragged on, felts in my eyes I can not find instructions on how to lower Hboot from 1.57 to 1.44 for example? thank you in advance!



Rep: (4)
Rebzy everyone with NG, I need help, I’ve been struggling with the phone for a month (sprint) I can’t do SIMlock, can anyone give step-by-step instructions with links? I will be very grateful (root, c-off and bootloader unlocked)

Full version

Help     rules

Now: 08/22/19, 1:50 p.m.