Rep: (2587)
Dasdranagon @ 17.09.19, 17:02*
In such cases, Alan advised to send him alrext.db file (in /Android/data/com.neverland.alan.alreaderext/files/)


It does not make sense. What I saw - I corrected. Why is it sometimes opens the penultimate - no idea. Nafig this topic.



Rep: (2587)
* MishaniaNSK, pozhaluystva exit from the program, copy all that is in /Android/data/com.neverland.alan.alreaderext the internal memory and AlReaderX directory on it though. Compress it all and throw me to the post office.

Posted on 16/09/2019, 21:10:

hoogin82 @ 16.09.19, 19:16*
Here, for example, set up letter only at the beginning of the chapter, why is it in a footnote, which, in fact, part of this chapter? Technically, of course, a new section called, logically but not really.


But if the letter is set in the beginning of this chapter - I can turn it off in the comments, and if normal - alas, it is a normal paragraph ...



Rep: (2587)
hoogin82 @ 16.09.19, 11:07*
tell me, what body.reader-left / right / center need tags? For languages ​​with different writing direction?


something for which it is intended - is no longer relevant, but now those styles override the views of the paragraphs in the docks and, in my opinion, RTF-ah. Those. It is taken from the document - right-aligned, and how it looks - is deducted from these styles.

hoogin82 @ 16.09.19, 11:07*
And yet, is it possible to disable or do you want to disable the classic drop cap in the body of the notes? If a note in a word / string, which happens often, it seems pretty ridiculous.


and what absurd footnotes different it is absurd to plain text with a paragraph in one or two words?

MishaniaNSK @ 16.09.19, 15:57*
Can. But in vain do you think I'm lying to you, all the same and I do not want to waste time on it.
Can I somehow not deleted.
I went to the application, clear your cache, data and deleted. I put the last - does not work. He repeated and set the old - works. Maybe you advise software to remove the application?


remove css files that are on the map (in the cap where it is written) and restart the reader. Was there a problem with the size of it, whether in pixels, or as a percentage. In general - delete files peresozdadutsya again and everything should be ok

Post has been editedAlan - 16.09.19, 18:47



Rep: (2587)
AlReaderX
Version: 0.2

Last update of the program in the header:15.09.2019
Attached Image
AlReaderX - this is a new version of the famous reader AlReader for Android and Windows (Win32).
Development stage: Alpha version. Testing. Debugging Release notes

Short description: Reading text formats with the possibility of editing typos in FB2 and THT.

Minimum system requirements: Android 4.4, Windows XP.
Russian interface: Yes.
Developer: Neverland
Homepage: http://alreader.com There are data on donates.

Topic of this branch. Basic Agreement.
  • This thread is primarily devoted to testing and finding bugs. , as well as discussing various aspects designed to improve the quality of the product.
  • The program is being actively developed, but still far from the release. Not everything planned is already implemented.
  • Welcome suggestions for expanding the functionality. Butfinal decisionatanywaysaccepts the author of the programAlan .
  • Question:"When?" - Is offtopic, a sign of bad taste and disrespect to the developer's work! A couple of words from the developer
  • pay attention torecommendations for the evaluation of posts.

Basic Agreement of my cooperation with the testers' (the developer).

  1. If you do not like anything else in this agreement, then you are in good conscience can leave messages you found bugs with them, along with your essential comments like that and when I have to do.
  2. The program is developed according to my ideas of how it should look and function. The extent to which I listen to your advice and wishes, depends on each individual situation and is not a constant value over time.
  3. In my opinion the main output, which receives a beta tester, it is an opportunity to influence my decisions in favor of the more convenient tester functionality and speedup of the final product. Hopes for any other result of your personal testing of the product - in vain. I will not be anyone "cherish", kiss ass, and so on. for what it is during the use of this product are not too lazy to send me a bug-report or throw me a problem I've found in the mail. I'll just say thank you and try to fix bugs. 100% read your wishes. Everything else - is not guaranteed or implied.
  4. Any phrases about the need to adopt such a solution, reasoned commercial use - not included. Commercial sale of this product does not apply to users. Nothing. If you have a question which, as it seems, does not fall under this condition and yet, in your opinion, it is of practical value - there are private messages. They are specifically for this and made.
  5. Note that any of your innovation, I probably meet very wary. The reason is simple - I do not want the conversion of the program into a monster who does everything and sometimes allows you to read books. I want to make a program, equipped with only the most essential and useful features for reading books. The usefulness and necessity, eventually appreciate me and only me. You can only express an opinion, I'll read is guaranteed.
  6. Item number duplicating previous cumulative:
    1. I do not owe anything to anyone. I not owed. And I will not have to.
    2. I do not consider myself someone that's got to. (Say "thank you" out loud, that is offline, if you are anything like it in any particular implementation or at all, I do not feel an obligation, it's just polite.)
  7. This program is done for my entertainment, not more. Therefore, participate in the discussion only if and while you are interested, no more and no longer. Nobody pulls you here by force, do not shoulder the burden.

Thank you for the possible / real participation in the testing.


Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Description. Read before you write in the subject line!

Attention!
  • The program is under development. Therefore, not all the features stated below already implemented:
    * - not yet implemented.
    ** - partially implemented.

Program features:
  • Compatible with Android 4.4+; Windows XP +.
  • Formats fb2, fb3, fbz, txt, epub (without DRM), html, doc, docx, odt, rtf, mobi, prc (PalmDoc). Support for ZIP and RAR archives.
  • Two color profiles Day / Night
  • One- and two-page mode with automatic switching.
  • Beautiful animation paging.
  • Setting the status bar and footer elements for windowed and fullscreen modes.
  • Support for displaying footnotes on the page and as a pop-up window.
  • Horizontal and vertical alignment of text on the screen.
  • "Hanging" punctuation.
  • Sections from a new page.
  • Transitions in the text - percentages, pages.
  • Content.
  • Support for browsing tables in FB2, Mobi and EPUB.
  • Fixing the rotation of the screen.
  • Support for skins with a choice of one-and two-page options.
  • Creating shortcuts for the book on the home screen.
  • The ability to hold the screen backlight.
  • Fine-tuning the style of display of the book through CSS.
  • 9 tap-zones for short and long tapas, gestures, gestures with two fingers, resizing text with a double-finger pinch, assigning actions to buttons.** ( The list of commands may be supplemented / modified as functions are implemented. )
  • Multilingual interface.* (So ​​far only Russian)
  • Correct translations for 20 languages.**
  • Editing FB2 and TXT files.*
  • Background clock under the text.*
  • Text Sound TTS.*
  • Sync read positionAndroid<->AndroidandAndroid<->Windows. *
  • Work with dictionaries.Presently:
    • Confirmed to work withGoldenDict , ColorDict , Dictan , Aard 2 , Lingvo , HedgeDict and Fora dictionary
    • Not confirmed work with FreeDictionary , Quick / Onyx Dictionary .

CSS, Skins, Advanced Settings, etc.

FAQ. Advice. Read before you write in the subject line!
Attention!
  • Upon detection of a problem (bug) you need to describe them in as much detail as possible:
    Your actions ->Expected Result ->Observed result.
    Bugreport can be posted in this thread or sent to the developer byQMSor mail:[email protected]or[email protected] .
    It is highly advisable to attach:
    1. ScreenshotSettings windows program or write "numbers" from its bottom panel.
    2. Log (Setting up logging even without ROOT)
    3. Specify format (fb2 , epub , doc etc.) and the problem book (if necessary).
    4. Screenshot (s) or videos showing a bug (if necessary).

Tips
  • In the dialogues (windows) "Search" and "Content" long tap (longtap) on anyline search results / at the point of detentionIt makes dialogue translucent.
  • On the menu:Tap Exit button - "turns off" the program, and longtap on it - completely unloads the program from memory.


FAQ:
  1. How to open a book? Opened the program - a white screen, nothing works.
    Books are being opened only through a third-party file manager. (For exampleTotal commander)
    In the file manager, you need to select the appropriate action type: "open with" ->AlReaderX.
    On Windows, open a book, you can drag and drop (Drag & Drop) file from Windows Explorer into AlReaderX window.
  2. How to call the "Menu", if you reassign the "default" call tapom in the center of the screen?
    There is an "unchangeable" gesture to call the menu: horizontal svaypfrom left to rightbyleftthe edge of the screen. Start to pull from the very edge of the screen.
  3. Why is there no Chinese / Swahili interface?
    Localization will be in the release, now there are a lot and often changes and new functionality is added.
  4. Are skins supported?
    Yes. For instructions and ready-made skins, see."CSS, Skins, Advanced Settings." -> "Skins" .
  5. Are CSS (cascading style sheets) supported?
    Yes (exceptdocx and odt ). For instructions, see. Section "CSS, Skins, Advanced Settings." -> "CSS" .
    FormatsdocxandodtCSSnot support. These are analogues doc with their styles.
  6. How to add my fonts?
    AlReaderX It can be used as a system, and "own" fonts. To add your fonts, put them in a folder Fonts or fonts on "Internal Memory" or at "Outside the map" . If this folder does not exist, create it.
  7. Where is the configuration file located?
    Configuration filealrext.ini located in the folder:
    /<inner memory>/Android/data/com.neverland.alan.alreaderext/files/
    (ForWindows version it lies in the folder with the program itself.)
  8. How to open the built-in file editoralrext.ini?
    To edit a filealrext.ini , you need to open the settings window and 5 times tap in the middle of the bottom panel (where the version number is).
  9. How to edit files * .css?
    As well asalrext.ini- 5 times tap on the middle of the bottom panel of the Settings window.
  10. Are * .ini configuration files compatible between Android and Windows versions?
    Yes compatible!* They can be used cross-platform: for example, configure on Windows and transfer to Android.
    * The "Advanced Settings" section describes some parameters related to only one of the platforms.
  11. Do you plan to implement support for TTS engines?
    Yes. But not in the near future.
  12. How to create a bookmark on the "Home Screen" of the device?
    In section "Settings " -> " Controls "assign event "Add Shortcut" to some "gesture". for example "Two Finger Swipe Up" .
  13. Is the mouse supported in the Android version?
    Yes . Through OTG cable.
    Left button:Thap, longtap and text selection after longtap.
    Right button:Tap anywhere - call the menu. Longtap - the output of their program.
    Also work "one-finger scrolls": paging, brightness, etc.
  14. How to set the display of two pages in the horizontal orientation of the screen?
    Default settingSettings ->Page ->Number of column set to " Auto ". At the same time, 2 pages in the landscape are displayed only when the ratio of the font size to the page width is less than a certain value.
    Forced display of 2 pages is done by settingNumber of column at " Two in landscape ".
  15. As a "roll back" program to an earlier assembly?
    The "old" version is not installed on the "new"! Those. program must be reinstalled!
    That the settings are saved during the rollback:
    1. Make a backup folder /Android/data/com.neverland.alan.alreaderext/files/ .
    2. Remove AlReaderX.
    3. Set the "early" assembly.
    4. Refit the backup of claim 1


Download:

Topics Curator: Dasdranagon


Post has been editedDasdranagon - 16.09.19, 14:04



Rep: (2587)
Release Notes AlReaderX

DEBUG 1909151
+ Straightening work css (selectors processed tag, .class, tag.class, tag tag, tag .class, tag tag.class, .class tag, .class .class, .class tag.class, tag.class tag, tag. class .class, tag.class tag.class, tag>tag)
+ fix

DEBUG 1909141
+ Support built into the document text styles in fb2.

DEBUG 1909123
+ Added a "roll program."

DEBUG 1909121
+ Support type selectors css "tag" ".class" "tag.class" "tag tag" "tag + tag" (pay attention to the last two, and if you do not understand what everyone - first read some documentation SSC)
+ fix

DEBUG 1909115
+ Read third-party fonts from both the internal memory and the card. uppercase and lowercase letters in the name of "Fonts" folder does not matter

DEBUG 1909111
+ Separate status line background color
+ Color headers (fb2)
SSC + in can specify the colors and fonts (fonts are set in the interface all colors - partially in the interface, partly in ini)

DEBUG 1909093
+ Jackdaw in dialogues search and content is only available when reading a place different from where moved in the dialogue (ie, after the tapas on item content or search)

DEBUG 1909091
+ Enter-on the keyboard - just vyvolnyaet search
+ I removed the caps
+ When receiving input focus field identifies the contents

DEBUG 1909081
+ Text search
+ fix

DEBUG 1909031
+ In all sorts of action Added "Lock orientation"
+ Label on the book can be made in the "Book Information"
+ fix

DEBUG 1908311 (android, win32)
+ fix

DEBUG 1908291
+ While holding the tapas on the "increase brightness" and "dim" is a sequential increase and decrease the brightness level. Those. savings clatter across the screen ... It is necessary or not - hell knows ...
+ Option unionbacklight = 0 in the ini file allows you to use Auto-Brightness, regardless of the day or night

DEBUG 1908281 Win32
+ DOCX and ODT support
+ fix

DEBUG 1908271
+ Straightening DOCX

DEBUG 1908261
+ DOCX and ODT support to the maximum. Test ODT files I have not a lot, so in case of problems - just send the problem to the post office. And the same applies to DOCX
+ fix

DEBUG 1908231
+ I tried to implement:
to make so that when you press on the head in content and delays the finger, the content of the window would become semi-transparent, so that the entire text would be visible through it. And when the finger removed - then again opaque.

DEBUG 1908193
+ Text size correction in vsplyvashke with footnote text
+ Margins of the status bar on the right and on the left consider padding that adds the skin
+ fix

DEBUG 190814
+ Regular dances for possible fixes the problem of improper opening of the latest books
Changes parser SSC +
+ fix

DEBUG 1908010
+ Edit all CSS in the same window as the ini file editing
+ Changed positioning stop for a smooth vertical scrolling scrolls line by line (hopefully clear what speech)
+ Correction, trivia

DEBUG 1905271
+ Adaptation options under the large font size

DEBUG 1906270
+ Russian localization. I listen to suggestions to rename :)
+ fix

DEBUG android 190623
+ For long tapov have a choice of three modes - text selection, tap zones, and Dictionary
+ Many tapas set in the control menu
+ Separate switching left and right sides of the screen to control the illumination
+ Changed thin line status and configuration read line
if you do not fit the default one kind of line read, then create a setting in the ini
[OPTIONS]
statusparam = X, wherein X is 0 initially.
If you need to remove the battery to remove the label -uvelichivaem X 1
If you need to remove the notches percent - increase X 2
If you need to remove the minimum distance between the left and right edges of the screen to read the line and header - increase X 4
If you need to read the line was filled - increase X 8
Received X and record the value of the parameter
The old option, which regulated that any of the above - does not work.
+ If you guess the reason of improper opening of the last file (instead of when the last previous offer) - is fixed. I have now the problem is not reproduced.
+ Individual backlighting levels for day and night. To use one level - add option
[OPTIONS]
unionbacklight = 1
+ fix

DEBUG 1904301
+ Change the menu view,
+ fix

DEBUG 1904071
+ Disable mirroring turn pages with 3D animation paging
[ANIMATION]
usebackpage = 0
+ fix

DEBUG 1902031
+ History of transitions stack is saved when you close the program
+ Skins, if lost, move in AlReaderExt / Skins folder on the internal memory
+ fix

DEBUG 1901071 - initial build.
Android 4.4+ (API 19)
Its main purpose - to start :)
Should work
+ Opening files from other sources (unlikely of all, but there could be as lucky)
+ Transition to full-screen mode and back dvupaltsevym tapom
+ Switching day and night holding two fingers down the screen
+ Zoom for text size
+ Animation paging (rabottosposobnost this is now probably most interested in - I waited for more than six months, when it will do and today finally come true ... Like :))
+ Virtually all options from ini file that is stored on the internal memory of the way Android \ data \ com.neverland.alan.alreaderext \ files \
+ Retention backlight (*)
+ Brightness control (on the right and the left edge of the text), including software shading (*)

* default off in the ini file

P.S. Ini file is read only when you start the application, ie, before the change - to close the running program controller built into the system


Post has been editedDasdranagon - 16.09.19, 13:59



Rep: (2587)
DEBUG 1909141
+ Support built into the document text styles in fb2.

Supports embedded in the document text styles in fb2.

Disabled by default, because most of it more harm than good. To enable to add to the ini file parameter
[BOOKS]
fb2styles = 1


Those. now there are two modes of opening fb2 files.

  1. Default (styles are disabled) is quite acceptable type of construction
    <p style = "text-align: center;">text</ p>
    All that is stated in the stylesheet is ignored.

  2. If the support of styles is enabled, the type of construction
    <p style = "text-align: center;">text</ p>
    not processed. Instead, you should use
    <p style = "textcenter">text</ p>

    In section within that particular SSC fb2, must form the design is
    <stylesheet>
    p [style = "textcenter"] {text-align: center;}
    </ stylesheet>

    It seems to correspond to the specifications fb2. In addition, the admissible invalid, but the more usual type of record
    <stylesheet>
    p.textcenter {text-align: center;}
    </ stylesheet>

I emphasize that the last two types of stylesheets task - to alridera absolutely equal. Here, for example, kulrider will only work with the first embodiment.

See alsoSetting FB2 styles by editing the file fb2.css

ZyuYyu I hope that I have described - at least someone is understandable and useful :)

Post has been editedDasdranagon - 16.09.19, 11:08



Rep: (2587)
Setting FB2 styles by editing the file fb2.css


see alsoSupports embedded in the document text styles in fb2.

General view of the css file is a set of types of records
Tag1 {property1: value1; property2: value2; ... propertyN: valueN;}
Tag2 {property1: value1; property2: value2; ... propertyN: valueN;}
пїЅ
TagM {property1: value1; property2: value2; ... propertyN: valueN;}

Where Tag1 ... Tag2 - those styles whose behavior you want to ask. Values ​​selected from the list (the values ​​that make sense to override)
title, subtitle, cite, date, author, text-author, annotation, epigraph, poem, stanza, v

Next, we consider the value pairspropertyN: valueN;Which pairs used - depending on the task that you set for yourself, so I will give a list of possible values, as a solution to the problem

The task - to redefine font size
font-size: 2.0rem;

The task - to use a different font
4 font available, each of which can be overridden in settings
font-famile: text;
font-famile: monospace;
font-famile: fantasy;
font-famile: firstletter;

The task - to use a different color
There are 8 colors, 4 of which are set in the settings, and 4 - in the ini file.
reader-color: text;
reader-color: link;
reader-color: bold;
reader-color: italic;
reader-color: bolditalic;
reader-color: code;
reader-color: title;
reader-color: firstletter;

The task - to change the alignment of the paragraph
text-align: justify;
text-align: left;
text-align: right;
text-align: center;

The task - to change the alignment of the last line of the paragraph
text-align-last: justify;
text-align-last: left;
text-align-last: right;
text-align-last: center;

Task - to change the indentation of a red line
text-indent: 8em;

The task - to change the paragraph indentation
margin-left: 2em;
margin-right: 2em;
margin-top: 2em;
margin-bottom: 2em;

The task - to remove extra spaces in vykusyvanie paragraph
white-space: pre-wrap;

The task - to turn off hyphenation
hyphen: none;

The task - to make a paragraph in bold
font-weight: bold;

The task - to make a paragraph in italics
font-style: italic;

The task - to turn the shadow of a paragraph symbol
font-shadow: 1;

The task - to turn off the shadow of a paragraph symbol
font-shadow: 0;


Post has been editedDasdranagon - 16.09.19, 11:06



Rep: (2587)
CSS support.
(Cascading Style Sheets - Cascading Style Sheets)
  1. Supports kinds of selectors* :
    p, p.style, .style, tag, .class, tag.class, tag tag, tag .class, tag tag.class, .class tag, .class .class, .class tag.class, tag.class tag, tag.class .class, tag.class tag.class, tag>tag
    * - if you do not know what it is - first read some documentation css.

  2. font settings (FONT_FAMILY ) Is allowed only in the form of a type of font: normal , fantasy , monospace , firstletter .
    All four are configured in the options.

  3. Available in one way or another property:
    font-style
    text-align
    text-aling-last
    font-weight
    font-size
    font-family
    page-break-before
    text-decoration
    vertical-align
    page-break-after
    margin
    margin-left
    width
    margin-right
    margin-top
    margin-bottom
    visibility
    text-shadow
    white-space
    hyphens
    text-decoration-line
    font-stretch
    text-indent
    letter-spacing
    display

  4. In CSS, you can specifycolors and fonts (All fonts are set in the interface, the colors - partially in the interface, partly in ini)
    font-family: text; font-family: monospace; font-family: fantasy; font-family: firstletter;

    reader-color: text; reader-color: link; reader-color: bold; reader-color: italic; reader-color: bolditalic; reader-color: code; reader-color: title; reader-color: firstletter;

    These properties make sense forfb2and their "personal"html. All other formats - probably lead to illegible or, at least, the unpredictability of the result (if any built-in document styles).
    Comments:
    • AT fb2 You can override " emphasis "And he will be drawn to its type.
    • ATepub You can override the "i", all will be drawn, but the selection can be made at the tag and the document style, and redefining "i" will not work. Or worse - in one document can be used and tags "i" and styles, as a result of the Italica will be drawn redefined letters, and some - the text font

  5. Sequence podgruzki styles.
    • - First read the same for all file formatsdef.css . It has specific properties to configure, for example, notes, size and other things. Something that is loaded by default (no file) is as follows:
      def.css
      body {text-indent: 2em; text-align: justify;}
      body.reader-notes {text-indent: 1em; margin-left: 1em;}
      body.reader-left {text-indent: 0em; text-align: left; margin-left: 0; margin-right: 0;}
      body.reader-right {text-indent: 0em; text-align: right; margin-left: 0; margin-right: 0;}
      body.reader-center {text-indent: 0em; text-align: center; margin-left: 0; margin-right: 0;}
      title {font-family: fantasy; text-indent: 0; text-shadow: 1; font-size: 1.44rem; text-align: center; margin-top: 2%; margin-bottom: 3%; margin-left: 10%; margin-right: 10%; hyphens: none;}
      subtitle {font-size: 1.2rem; text-align: center; text-indent: 0; margin-top: 1%; margin-bottom: 1%; margin-left: 5%; margin-right: 5%}
      image {text-indent: 0; text-align: justify; margin-left: 0; margin-right: 0;}
      body.reader-sup {font-size: 70%;}
      body.reader-table {font-size: 65%; }
      body.reader-firstletter {reader-color: firstletter; font-family: firstletter; font-size: 2.07rem; font-weight: bold; text-shadow: 1}


    • - Next, read the file format propertiesXXX.css where XXX - this fb2 , fb3 , mobi , html , epub .
      By default, loading the following styles:
      html.css, mobi.css, epub.css
      h1, title, .title, .book-title {font-family: fantasy; text-indent: 0; text-shadow: 1; font-size: 1.44rem; text-align: center; margin-left: 10%; margin-right: 10%; hyphens: none;}
      h2, .subtitle {font-family: fantasy; text-indent: 0; font-size: 1.2rem; text-align: center; margin-left: 10%; margin-right: 10%;}
      h3, h4, h5, h6 {font-size: 1.1rem; text-indent: 0; text-align: center; margin-left: 5%; margin-right: 5%}
      q, blockquote, cite, .cite {font-size: 0.92rem; text-align: justify; margin-left: 5%; margin-right: 5%}
      pre, tt {font-family: monospace; text-indent: 0; font-size: 0.83rem; text-align: left; white-space: pre; hyphens: none;}
      code {font-family: monospace; font-size: 0.83rem; white-space: pre;}
      .author, .text-author, .date {font-size: 69%; text-indent: 0; text-align: right; margin-right: 10%;}
      .annotation {font-size: 0.83rem; font-style: italic; text-align: left; margin-left: 45%; margin-right: 5%}
      .epigraph, .epigraf {font-size: 0.83rem; text-align: right; text-indent: 0; margin-left: 55%;}
      .poem, .stanza, .v {font-size: 1rem; text-align: left; text-indent: 0; text-align-last: right;}
      table, tr {text-align: justify;}

      fb2.css
      title, book-title {text-align-last: right; font-family: fantasy; text-indent: 0; text-shadow: 1; font-size: 1.44rem; text-align: center; margin-top: 2%; margin-bottom: 3%; margin-left: 10%; margin-right: 10%; hyphens: none;}
      subtitle {font-size: 1.2rem; text-align: center; text-indent: 0; margin-top: 2%; margin-bottom: 2%; margin-left: 10%; margin-right: 10%;}
      cite {font-size: 0.92rem; text-align: justify; margin-top: 1%; margin-bottom: 1%; margin-left: 5%; margin-right: 5%}
      pre {font-family: monospace; font-size: 0.83rem; text-indent: 0; text-align: left; white-space: pre; margin-top: 2%; margin-bottom: 2%; hyphens: none;}
      code {font-family: monospace; font-size: 0.83rem; white-space: pre;}
      date, author, text-author {font-size: 69%; letter-spacing: 1; font-style: italic; text-indent: 0; text-align: right; margin-top: 1%; margin-bottom: 1%; margin-right: 5%}
      annotation {font-size: 0.83rem; text-indent: 4em; text-align: justify; margin-top: 2%; margin-bottom: 2%; margin-left: 35%; margin-right: 2%;}
      epigraph {font-size: 0.83rem; text-indent: 0; text-align: right; margin-top: 2%; margin-bottom: 2%; margin-left: 40%; margin-right: 4%;}
      poem {font-size: 1rem; text-indent: 0; margin-top: 1%; margin-bottom: 1%; text-align: left; white-space: pre; text-align-last: right;}
      stanza {margin-bottom: 2%; white-space: pre; text-indent: 0}
      v {font-size: 1rem; margin-top: 0; white-space: pre; text-indent: 0}
      table, tr {text-align: justify;}
      sequence {font-size: 0.83rem; margin-top: 2%; letter-spacing: 1; margin-bottom: 2%; margin-left: 35%; margin-right: 2%; text-indent: 0; text-align: right;}
      image {font-size: 0.83rem; text-align: center; letter-spacing: 1; margin-bottom: 1%; text-indent: 0}

      fb3.css
      title, book-title {font-family: fantasy; text-shadow: 1; text-indent: 0; font-size: 1.44rem; text-align: center; margin-left: 10%; margin-right: 10%; hyphens: none;}
      subtitle {font-family: fantasy; font-size: 1.2rem; text-indent: 0; text-align: center; margin-left: 10%; margin-right: 10%;}
      h3, h4, h5, h6 {font-size: 1.1rem; text-align: center; text-indent: 0; margin-left: 5%; margin-right: 5%}
      cite {font-size: 0.92rem; text-align: justify; margin-left: 5%; margin-right: 5%}
      pre {font-family: monospace; text-indent: 0; font-size: 0.83rem; text-align: left; white-space: pre; hyphens: none;}
      code {font-family: monospace; font-size: 0.83rem; white-space: pre;}
      subscription, author, text-author {font-size: 69%; text-align: right; margin-right: 10%; text-indent: 0}
      annotation {font-size: 0.83rem; font-style: italic; text-align: left; margin-left: 45%; margin-right: 5%}
      epigraph {font-size: 0.83rem; text-align: right; margin-left: 55%; text-indent: 0}
      stanza {margin-bottom: 2%; white-space: pre; text-indent: 0}
      poem {font-size: 1rem; text-align: left; text-indent: 0; text-align-last: right; white-space: pre;}
      table, tr {text-align: justify;}


    • - After that, loaded all the CSS, which is in the book. What to read in the book of the CSS, it is possible to some extent to adjust, for example, does not take into account the size and type of font, or not read indentation, etc.
      ATfb2 you can load the preset styles. details here and here .
      ATfb3 styles of the book itself is not loaded. But you can tie if it is claimed.

      Notes:
      • Files* .css must be encoded in UTF-8 (or in ANSI If the comments in English only).
        They should be in the folder: <inner memory>/Android/data/com.neverland.alan.alreaderext/files/assets/
        Default files can be downloaded below.
      • Formatsdocx and odt CSS not support. These are analogues doc with their styles.
Download:
Archives need to decompress in a folder:
<inner memory>/Android/data/com.neverland.alan.alreaderext/files/assets/

All files in one archive:Attached fileAll_In_One_CSS.zip(2.65 KB)

Attached filedef.css.zip(409 bytes)
Attached filefb2.css.zip(525 bytes)
Attached filefb3.css.zip(462 bytes)
Attached filehtml.css.zip(475 bytes)
Attached filemobi.css.zip(475 bytes)
Attached fileepub.css.zip(475 bytes)



Post has been editedDasdranagon - 15.09.19, 20:09



Rep: (2587)
DEBUG 1909151
+ Straightening work css (selectors processed tag, .class, tag.class, tag tag, tag .class, tag tag.class, .class tag, .class .class, .class tag.class, tag.class tag, tag. class .class, tag.class tag.class, tag>tag)
+ fix

Post has been editedAlan - 15.09.19, 15:05



Rep: (2587)
ОћО•ОќОџО¦О‘ОќО—ОЈ @ 15.09.19, 12:35*
It does not really make that custom alignment worked in a tag in the tag


alignment can be in a paragraph, while the tag within a paragraph's alignment can not be. Even in theory. And what do you want - you can do using the code (ie, a monospaced font) and the desired number of non-breaking spaces to those same numbers have always been one and the same length. And in this case do not have to disconnect mayatsya foolishness vykusyvaniya extra spaces

Post has been editedAlan - 15.09.19, 14:20



Rep: (2587)
ОћО•ОќОџО¦О‘ОќО—ОЈ @ 14.09.19, 22:07*
It turns out if css something like p {white-space: pre-wrap;} the words separated nbsp sent to the dictionary together.


conceived so that if you choose a translation from the selection menu, together (for sending in order to showcase the vocabulary of phrases), if the dictionary mode - it separately. And whatever it actually works - check ...

rand @ 14.09.19, 23:13*
On at the assembly ceased vylazit search interest by clicking on the bottom of the screen, but krgda press the bottom left or right, nothing happens (established flipping back and forth), you need to press just above the bottom, same story, and with the top-have when you press the area on that nothing happens.


and?



Rep: (2587)
hoogin82 @ 14.09.19, 12:07*
This is the most logical, as with epub'om

with epabom, unfortunately, it will not work - in most of the Bold and italic styles of books given through rather than tags i and b, and without it - worse than with the built-in book style

hoogin82 @ 14.09.19, 12:55*
fb2 author simply follows the rules of plays registration

in my opinion, the author fb2 can shove pieces of registration rules currently somewhere deeper. All these rules - a very, very amateur.

Post has been editedDasdranagon - 14.09.19, 23:08



Rep: (2587)
ОћО•ОќОџО¦О‘ОќО—ОЈ @ 14.09.19, 21:30*
I'll try to remove the log:


and what should be in the log? The phrase "I'm here something not singled out"? Are you an hour to save the css is not discontinuous gaps have not changed?



Rep: (2587)
ОћО•ОќОџО¦О‘ОќО—ОЈ @ 14.09.19, 20:44*
Here in the book lines are numbered, as is customary in ancient literature publications. Line number (Greek numerals) separated superscript and separated from the text line by three non-breaking spaces. So if you click on a word in the beginning of the line (which is the first word, not a superscript number) to send it to the dictionary, it is sent to the dictionary with the number.


something I did not watch ...



Rep: (2587)
poeval @ 14.09.19, 20:24*
The latest version no longer governed by the background color of the state. After closing the settings window, the color remains the same.


top setting the background color of state is the jackdaw - whether to use it at all. By default, of course, is off



Rep: (2587)
hoogin82 @ 14.09.19, 14:42*
But some time is necessary


the question is not in a hurry, no one is late. thank

Post has been editedAlan - 14.09.19, 16:15



Rep: (2587)
* hoogin82, By the way, once you're out there going through all of these styles, and so on - you can take the trouble to check that everything is working properly at all? In terms of priorities, the selectors, the adequacy of the application, and so on.? Overpower?



Rep: (2587)
hoogin82 @ 14.09.19, 13:24*
By the way, it's funny, but it is standard i and b is not valid tags.


I'm not talking about the specific tags, and about setting principle.

But it is not he invented. Open several pieces on paper and see for yourself.


So that's the point - I do not want to openpaperbook. I have the ability to read electronic, and there who coined for paper - me, to put it mildly, do not care. I just want to read comfortably, and not by some left rules.



Rep: (2587)
hoogin82 @ 14.09.19, 12:21*
Its value can be px, pt, em, rem,%.


in this case, i.e., to adjust the reading AlReaderX, I would recommend to always use the rem - is the base font size, which the user specifies the size of the text in the settings.

Posted on 14/09/2019, 13:38:

istomin_an62 @ 14.09.19, 11:54*
On the new alridere it looks ridiculous.


that in the new, that old - I'm not seeing the difference. However - is now an option at all off - make a full underline, that I still do not see ... But the problem is that I filled footer row does not bring out, it will still be 3/4 of the screen width.



Rep: (2587)
istomin_an62 @ 14.09.19, 10:10*
Here is the old and the new alridere:


and?

Full version

Help     rules

Time is now: 18/09/19 12:30