ratnikvdv , what are you talking about? What options do not suit you? And what's wrong with updates?
Phones are regularly updated 6 years already (the first Jolla Phone). Sailfish OS in all its glory.
Flies on a non-top-end hardware for 13 years, I want to note. But the hadron collider on the phone doesn’t need to be launched either. So the iron is quite imagined.
Tseshki has more operatives. It will be a little faster (not so much). It is poorly assembled unlike the first (in my opinion). Yes, and less common, since they were released in a small batch.

Alexxxl both.

megadethvv ACR is working. Just checked.

But VoLTE did not appear ..

Post has been edited7Raul7 - 18.07.19, 20:52

Dexp ,
After today's reset, an upgrade to 9kies came to the Hong Kong version to the factory settings. So far, stable.



Post has been edited7Raul7 - 18.07.19, 18:38

The_Assassin , strange topic: flood:
I noticed that when the phone is in an armored case, this often happens. Somewhere in the center of the screen there is a false alarm and here with a curtain too ... It helps to click on the glass of the screen or lock / unlock (most often).
In its pure form (without accessories), I observe this when the phone heats up.
In general, for the first time I encounter such behavior. Yes, and Sony ...

Hello!
Tell me, do many of you have phantom touches at the top of the screen? I observed this at the beginning of use 6 months ago. During. And watching now. Rarely, but nonetheless.
I would like to understand - is it due to some design features that occurs or a marriage ... the guarantee is still valid
model H4233

YegreenDR unusual behavior. But, it seems, a similar problem has already been raised here several times - try searching.

Another thought is to put the Windows bootloader with your hands. But here I can be mistaken.

YegreenDR , in the BIOS did not change anything except this?
As an option - optionally reset the BIOS to the default settings.
Or more tips wait: derisive:

YegreenDR change the boot order now

YegreenDR as soon as the reboot went. I assume that your flash drive is the first in boot order .. And it starts to install Windows again. Therefore, remove the USB flash drive during the reboot from the device until the reinstallation screen appears.

YegreenDR try to pull it out.

YegreenDR , my question may seem silly, but do you pull out the USB flash drive during the reboot or not?

Pipito4437 , the way it is. This is Hi6555 GFC V211 BGA. The whole sadness is that for now, something can not be found on the Internet on order, except on 2 questionable Chinese sites ..

Upd. :
Yes, and it’s generally about stencil, apparently ....

Post has been edited7Raul7 - 30.06.19, 12:06

audi000 ,


I find there only hi6555gfcv110
And you need hi6555gfcv211.
But they differ in the figure.

On v211, I have not yet stumbled anywhere.

Pipito4437 , according to this photo, still, it seems that hi6555.
But, I’m still getting caught ..



Post has been editedellarair - 20.06.19, 23:22

Hello! Maybe someone knows / can tell the marking of this chip? What kind of microchip in general, all the information about it ...



Post has been editedellarair - 20.06.19, 22:25

Pipito4437 , OK thanks. But, unfortunately, not what is needed. If I'm not mistaken, of course ..

Pipito4437 there must be something like this, as I understand it ..


Post has been edited4Serg13 - 20.06.19, 21:56

Pipito4437 I don’t have a phone now. But here this chip is located. I hope that is visible / understandable



Surokgg , in this in the process. Documents are all available. Generally some kind of misunderstanding on their part. For the first time ever.

Post has been edited4Serg13 - 20.06.19, 21:56

Surokgg , Yes. The phone drowned.
In the service, the chip was "not put in place." Now there is no understanding on it.