In general, I was able to defeat this stupid inscription dm_verifi
We do everything according to the instructions, first let's say we have 9k firmware installed.
According to the instructions from the caps, we roll back to the stock, immediately as we didrollback, do not loader loader, and sew throughadbOnce again the firmware HH1-1460-0-00WW-B02-update, after it was turned on, we do the lok, I did the lok critic first (fastboot oem lock_critikal) boot, then the usual lok (fastboot oem lock). All dm_verifi inscriptions are not, you can probably in the header

Post has been edited666999666 - 03.07.19, 08:59

Style2010
In general, I did as you said downloaded adb flashed, the phone began to boot, but this sign did not go anywhere! Now, again, I unlocked the 9ku and again I sew the stock, I will try right after the firmware through the ost, flash it through adb and then lock it.

In general, when you sew through adb, the firmware is completed successfully, but when the firmware starts, when verification is in progress on the phone, it writes the following lines:


Style2010
when checking the counter, it gives me
D: \ tools_r29.0.1-windows>fastboot oem cert_timecount get
FAILED (remote: 'unknown comm
and ')
fastboot: error: Command failed

D: \ tools_r29.0.1-windows>

Post has been edited666999666 - 03.07.19, 08:47

Style2010

D: \ sharp \ OST304_forall_portable_v2 \ SUT>adb sideload HH1-1460-0-00WW-B02-update.zip
loading: 'HH1-1460-0-00WW-B02-update.zip'
* can't read 'HH1-1460-0-00WW-B02-update.zip' *

Style2010
Yes, maybe the firewood did not correctly stand up, did not save, unfortunately, now I sit through the flash drive I pray :)

Posted on 07/02/2019 23:24:

Style2010
heineken
In general, did not give results, as dm_verifity pops up and pops up

Style2010
Through adb I did not want to be put, now I try through a flash drive!

heineken
and how to be now?
that would completely return to stock, and what to do in twrp

heineken
In general, I stitched again the drain through the stop, booted into the system, all the rules
Then the bootloader gave the command fastboot oem lock_critikal, he locked up, a message appeared on the phone screen saying that you want to lock, I am so yes. Next, I gave the command fastboot oem lock, again the message that you want to lock, I say yes. As a result, when booting again dm_verity

moreover, after I criticized, dm_veriti was not, it appears only with fastboot oem lock
Style2010
I will try now, I sit downloading firmware for recovery.

Post has been edited666999666 - 02.07.19, 22:40

heineken
And another question, we are locking the usual loader, and criticized? because when I unlocked the second boot loader, the critic had already been unlocked

Style2010
l heineken
Yes, I asked for the instructions on the phone turned on, I turned it off, locked the bootloader, etc. and all he writes is this line. Then I unlocked it again and rolled the firmware out of the header again ...
heineken
heineken
Flash firmware for stock recovery or what? I have the same stock now

Style2010
I decided to return the phone to the stock, I asked for the instructions above, but after I locked it, the phone stopped loading, what to do now :) writes an error dm-verity is note started

Post has been edited666999666 - 02.07.19, 22:18

Style2010
Yes, I read it all, just one writes one thing, another another, let's summarize everything into one instruction, for example, Step 1, then this, this or that, and this module, or else in different places, etc. I was tortured already. :)
Now I will ask what module, the one in the header? :)))

Post has been edited666999666 - 02.07.19, 19:19

Style2010
this?

ua.makc,
And what tvrp, I put the one in the hat like robit
just someone writes that it puts a new one, etc. and what is new? or patched boot in post heineken?

Post has been edited666999666 - 02.07.19, 17:37

Style2010
tell me not quite understood
Here I put 9ku downloaded, tvrp from the cap, installed a fix, now I put updates
or ngado first install updates then tvrp and fix,
Further question on TvRP, put the one in the cap or here slipped some new one, but there is no TvRP itself, but there is only a boot. In short confused unravel

Style2010
ua.makc,
Thank you, I have written everything, I will put a TvRP and a patch

Style2010
And also tell me, here I put the 9k, you need to put updates that are in the header, or you do not need

Style2010
it is simply written that if it is not sewn, it will not be displayed correctly, etc. ok i'm trying to sew up 9 droid

ua.makc,
charge 90, drivers are normal, not the first year I sew phones
Can I try to pour stock? it will not be worse? According to the instructions from the caps?

ua.makc,
attached

Style2010
Thanks went further, I boot into the recovery, then into the bootloader, the firmware is on, but the critical window does not appear, an error is displayed!
something about adb


Post has been edited666999666 - 02.07.19, 08:50