Thank you for your statement, but it refers to a full Google softiny, not Google Go. I have neither compass nor Voice Match ... nothing at all. All clambered is full of "Alter".
And he does not see in Google's pleymarkete says you have installed Go - bulging!

:(

I do not know, I can try to mow the Go and try to put a full-fledged Google here with 4pda?
It could not take place, however, that this dpyan I Scotia, and Google will not rise, saying that my device does not designed ...

https://m.iguides.ru/m...ya_slabykh_smartfonov/

Post has been edited[HC] HUNTER - 14.09.19, 23:34

Colleagues, as well as regular firmware make-activation of Google voice assistant "OK Google"?
And there stands some Google Go, in appearance very flawed stuff ... ((

Thanks, I will try!

I solved the problem by using Headset_Button_Controller_Pro_8.5
he knows how to wake up the phone and wait for a voice command.

I have a stupid question ... reverse - how to make wallpaper scrolls! : D
recently added a second screen and was surprised to find that the wallpaper is not skroliruyutsya as before ... o.O
and so their cut and commercials - to no purpose ... just a static picture, and go over to the left and right icons.

Prompt and you can somehow wake the phone from sleep mode button bluetooth headset or wired?
All of these voice control program - it's good ... but when your hands are busy as a general wake up the phone, he started to take any voice commands?
Personally, I do not work anything until I did not press the release button on the unit.

I tried in every one to customize the Google-assistant ... useless. Until the screen is turned on, it does not take no voice. And even in the Setup Assistant then I found that Voice Match only works when the screen ... ((
I tried to find some utilities that sit in the background and track clicks, but it looks like the system they too jamming.
Otherwise, not at all? It turns out, really can not be done hands-free?

Post has been edited[HC] HUNTER - 09.09.19, 10:21

I encountered only 1 time ... I didn’t understand how it turned out, but a lot of things were launched and clicked between the windows.
then it itself disappeared in the next couple of minutes after redrawing the “desktop” with some kind of applause.

I use 2 SIM cards + sd through perehodnichok. somewhere I brought pictures ...



Post has been edited[HC] HUNTER - 30.07.19, 21:01

I'll try one more time to ask ...
... bracelet Mi Band 2, Mi Fit program from the official v4 pleymarketa (previously stood Lolexmod 3.5.1).
Phone Xiaomi Redmi Note 4x + MIUI 10, rue not.

It seems that after the update to MIUI 10 (approximately 2 months) Service is operating normally, and the notification of calls and viber on the bracelet do not reach. Not even vibrate. Or come spontaneously, it seems when the phone is asleep.
Double-checked all the settings - nothing has changed, all crows are, it should be notified. Mi Fit for exceptions everywhere and startup.

Where you can try to see? Thank!
Can AMSUser fashion something to help?

Similarly, in the Smolensk region. tariff "Laptop".
It is enough for everyday tasks.

Colleagues, bracelet Mi Band 2, the program Mi Fit 3.5.1
Phone Xiaomi Redmi Note 4x with MIUI 10

About 2 months longer Service is operating normally, and the notification of calls and viber on the bracelet do not reach. Not even vibrate.
Double-checked all the settings - nothing has changed, everything is worth, it should be notified.
Reboots the phone, about an hour everything is working as it should and all notifications come. As a sleep for a while - but Service runs again ...

Where you can try to see? Thank!

Well, then we began to track not only ttl and imei, but also the resources to which the phone appriori can not walk ...

Apparently go to fastboot and sew anything.
Or you have already tried a lot of things?

Post has been edited[HC] HUNTER - 17.05.19, 16:58

with XDA:
Xperia X dual card



Post has been edited[HC] HUNTER - 30.04.19, 19:59

v3.2.3, 3.3.0


twrp-3.2.3-0-kagura.img(19.41 MB)
twrp-3.3.0-0-kagura.img(19.43 MB)


Post has been edited[HC] HUNTER - 30.04.19, 09:53

Personally, I have never when changing volume Pikalo nothing ... no earlier Z1, or now on the XZ ...
Perhaps the meaning beeping after reaching the maximum volume. He is present.

It is about the official firmware.

You almost want to immediately back on the 7-a-boo, and even 8-ku ...
Not least because that MM even algorithms of work with the fingerprint is not normally done. Etc. etc...
Inconvenience will be far greater than the fight with some "glitches" ... By the way, what kind of bugs have in mind? I'm here Oreo working for a month without a reboot and everything is OK.

Post has been edited[HC] HUNTER - 17.04.19, 09:45

compared with how organized regular cooling - it's just MEGAradiator! ))
that's what idiot thought of to transfer heat from the iron on plastic?

But in general, the modem is not so much hot, I think, to put powerful cooling. maybe even enough holes nasverlit ...
my copy has worked a year 24/7. radiator placed just ... out of respect for a piece of iron. Now he even barely-warm.

I proceeded from the fact that:
1. it is sometimes necessary to get a sim card
2. The spring is not like proslabnet shtrapsy and will always push the quality radiator.

and so it can be easy on the hot-melt glue, just at hand was not ...
more can be done 2 spring brackets and just wear them on both sides, when the sim installed. but this idea has visited me later ...

My version of passive cooling.
Radiator simply pressed against the screen with the easily removable spring clip. Slightly smeared his bottom KPT-8 ...