Rep: (1783)
DiscussionHuawei E3531 (MTS 423S, Megaphone M21-4)


Photo modem:

Attached Image
Attached Image


Specifications:
  • Main technical characteristics:
    • GSM / GPRS / EDGE 850/900/1800/1900 MHz
    • HSPA + / HSPA / UMTS 900/2100 MHz
    • Data reception speed up to 21.6 Mbit / s
    • Data transfer rate up to 5.76 Mbps.
    • MTS 423S modem has firmware version 21.318.15.00.143
    • Megaphone M21-4 modem has firmware version 21.318.21.00.209
    • Huawei E3531s-1EA modem (Megafon Tajikistan) has firmware version 21.318.75.00.805
  • Varieties of Huawei E3531:
    • Huawei E3531s-1 - this version is the MTS 423S
    • E3531s-1: 2100MHz
    • E3531s-2: 2100 / 900MHz
    • E3531s-6: 2100/1900 / 850MHz
    • GSM / GPRS / EDGE 850/900/1800 / 1900MHz
  • Operating Systems:
    • Windows XP, Windows Vista, Windows 7, Windows 8,
    • Mac OS X 10.5, Mac OS X 10.6, Mac OS X10.7, Mac OS X10.8
  • Additionally
    • Additional features: MicroSD card slot (up to 32 GB)
  • Interface:
    • Interface: USB 2.0
  • Form factor:
    • USB
  • physical characteristics
    • Dimensions: 84x27x10,5mm
    • Weight: 30g.
Necessary information for help.
  • Which oneOperating system .
  • Screenshot, or text in the log code fromDC-Unlocker .
  • ScreenshotDevice Manager with deployed:
    1. DVD and CD drives
    2. Disk devices
    3. USB controllers
    4. Modems
    5. Ports (COM and LPT)
    6. Network adapters
Types and features of modem firmware:
COPY(with a small edition). ORIGINAL.
For this modem, there are 2 fundamentally different types of firmware - STICK and HILINK. Firmware interchangeable, that is, in any modem you can flash any firmware.
STICK
With this firmware, the device behaves like a classic USB modem: there is a command AT-port through which you can establish a connection using the PPP protocol (RAS). This is how almost all previous-generation 3G modems work. The speed is limited - no more than 20-30 Mbit at the reception. In addition to the PPP mode, there is an NDIS mode. In this case, the modem emulates a network interface through which data is transmitted, and only control commands are sent through the AT port. In this mode, the speed is not limited. The main feature of the stick mode is to establish the connection and support the operation of the channel using the OS of the computer to which the modem is connected. At the same time, the computer receives an IP address directly from the cellular provider through a DHCP request, and the modem acts as a network bridge, transmitting the packets from the computer to the cellular network and back without changing them.

The initial USB stick stick composition is a virtual CD-ROM and microSD card reader. In order for modem ports to appear, you need to switch the composition. Under windows, this is done by carrier software available on a virtual CD, or by the huawei proprietary program Mobile Partner. Under linux, switching is done by the usb-modeswitch program. It is possible to prohibit the transformation of songs. This is done with the following command:
AT ^ SETPORT = "FF; 1,2,3,16"
In this case, the modem immediately after switching on will look like a modem, 2 AT ports and a NDIS network card. CD and microSD will be excluded from the configuration. This mode is extremely convenient for using the modem in various home routers. To switch back the composition with switching, use the command:
AT ^ SETPORT = "A1, A2; 1,2,3,16, A1, A2"

Version numbers of stick-firmware always start at 21 — for example, 21.318.05.00.00.
Included with the Stick-firmware, the so-called Dashboard is flashed into the modem - an image of a virtual CD that appears in the system after the modem is connected. On this CD are the modem drivers for different operating systems, as well as a control program with which they establish a connection to the Internet, read SMS, make USSD requests, etc. There is a universal version of this program from the manufacturer of the Huawei modem (Huawei Modem), as well as specialized versions from specific telecom operators.

HILINK
With HILINK firmware, the modem works in the router mode and is presented to the computer as a network interface (usb-ethernet-rndis). The computer receives network settings from this interface via DHCP, and then goes through it to the Internet, like through a regular wired LAN. The modem assumes all care for establishing a connection and maintaining the channel, the computer does not even notice that access to the Internet is through a cellular network. In this mode, the modem has its own local IP address (usually 192.168.8.1), visible from the computer as a default gateway (default route), as well as an external IP address obtained from the cellular network. Routing is performed between the network of the cellular provider and the local network (modem-computer) using the address translation mechanism (NAT). Provides port forwarding from the external network (port forwarding and DMZ).
The modem is configured in this mode via the WEB interface available in the modem and accessible via its local IP address. Also through the WEB-interface information is available on the state of the modem and the signal of the cellular network, connection management, reception and transmission of SMS messages and USSD commands, SIM menu and much more. This is especially valuable for Linux users, as well as for those who have a modem connected not to a computer, but to a home router. Modem configuration via AT commands, as in stick firmware, is not performed in the normal mode of hilink firmware, although it is possible in the special DebugMode debug mode.

The initial HILINK modem USB composition is exactly the same as that of the stick - a virtual CD-ROM and microSD card reader. Switching tracks under windows is a small program mbbservice, run from the built-in CD. Under linux, this is done by the usb-modeswitch program. Regularly modem developers do not provide a mode without switching tracks. Nevertheless, it is possible to make such a mode by some modification of the firmware. At the same time, the built-in SD card reader is lost, however, it becomes possible to use a modem with any router that supports usb-rndis network cards.

Version numbers of hilink firmware always start at 22 — for example, 22.318.05.00.00.
HILINK firmware consists of two parts - the firmware itself, and the WebUI (web interface). The first firmware is the main firmware, then the WebUI.

Unlock modem. Recovery attempts to enter.
COPY(with a small edition). ORIGINAL.
UNLOCKING MODEM:
As usual, modems from cellular operators are delivered blocked - they can work only with SIM cards of this operator. The list of plmn-codes allowed for use can be viewed with the commandat ^ simlock? .
Of course, this situation does not suit us - we want, having bought a modem, to use it with any sim card. For this, the manufacturer laid the opportunity to unlock the modem. This is done by entering the unlock code (nlock code ), calculated by a special tricky algorithm from the IMEI modem.
Calculator to calculate codes can be downloaded here (there are versions for windows and linux).
To unlock, follow these steps :
- Calculate the unlock code using the above calculator. Of all the codes he uses, code v201 .
- Insert someone else's sim card into the modem (sim card of another cellular provider, not the one who sold you the modem).
- Connect the modem to the computer.
Further, the control program (for stick-modems) or the web interface (for hilink-modems) will ask for the unlock code, which must be entered. All - the modem is unlocked and will work with any sim card.
In addition to entering the code through the program and the web interface, you can also enter it via the AT command. This is especially true for stick-modems under linux.
The team looks like this:
at ^ cardlock = "unlock code" - used code v201

*****

RECOVERY ATTEMPTS:
The number of attempts to enter the code is limited10 attempts . If the wrong code was entered 10 times, the modem blocks further attempts - more, the at ^ cardlock command will not unblock it, even if you enter it with the correct code. If you still managed to exhaust all input attempts, that's okay - they are easy to recover.
This is done by such teams.:
at ^ datalock = "unlock code" - used code v201
at ^ maxlcktms = 10
10 is the new number of attempts (you can enter any number from 1 before 255 ). You can then enter the command at ^ cardlock with the correct code and unlock the modem.

Total:
consistently enter AT commands from top to bottom:
at ^ datalock = "NCK code" - used code v201
at ^ maxlcktms = 10 - you can enter any number from 1 before 255
#
at ^ cardlock = "NCK code" - used code v201

Useful tips:
Dashboards, firmware, WEBUI

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedferhad.necef - 21.07.19, 18:49
Reason for editing: Who has problems with access to the Internet



Rep: (1783)
* h3dzoo
Attached fileconfig 2.plist 5.zip(2.37 KB)


Posted on 07/21/2019 11:19:

h3dzoo @ 07.21.19, 11:15*
now it turns out to try different frames?

Yes, now I have prescribed 0x16060000 there is a mention that it works on it, if it does not take off, then through igfxframe = frame it is necessary to select.



Rep: (1783)
* h3dzoo
Try it, if it does not, then I will add drop ssdt tables
[attachment = "16850616: config 2.plist 4.zip"]

Attached files

Attached fileconfig 2.plist 4.zip(2.37 KB)


Post has been editedctich - 21.07.19, 10:59



Rep: (1783)
* h3dzoo
What do you have in the efi / acpi / patched folder?



Rep: (1783)
* h3dzoo
Attached fileconfig 2.plist 3.zip(2.23 KB)



Rep: (1783)
Dobrodukh @ 07.21.19, 09:57*
Advise a powerful graphics card. Is Sapphire Nitro + Radeon RX 590 1560MHz a good choice?

If there is an opportunity to wait, wait, collect and use on the installation, in the last beta there is no support yet, neither in 10.14 nor in 10.15



Rep: (1783)
* h3dzoo
Errors on dsdt, now I will correct, for now, show the screen of cakes in the clover

Posted 07/07/2019 10:31:

* ctich
Attached fileconfig 2.plist 2.zip(2.24 KB)


Post has been editedctich - 21.07.19, 10:32



Rep: (1783)
Vcreatyv @ 07.20.19, 23:15*
for sample
config-2.plist.zip (2.47 KB) Number of downloads: 2

In this variant, you do not correctly prescribe the order of bytes for ig-platform-id in the reverse order.
Right, for example: ig-platform-id 0x16 26 00 06
atDevices -> Properties prescribe as follows: 06 00 26 16

Post has been editedctich - 21.07.19, 09:41



Rep: (1783)
h3dzoo @ 07.20.19, 00:49*
Tell me how to get graphics on the Core i5 5200U (Aser aspire e17 e5-772g-57dl laptop).

Attached fileconfig 2.plist.zip(2.24 KB)



Rep: (1783)
and can I put the old config in my config.plist? where to download found

Yes, but after the update, note that the folders in the clover itself have changed, so I recommend making a backup flash drive !!!



Rep: (1783)
Clover version 4558, all the cakes on the efi section are in the folder other

Actual clover 5018, respectively, and all the cakes in it also need to be updated, and only then try to update.



Rep: (1783)
* attacer,
But there is no possibility of loading into 10.13.6?



Rep: (1783)
* Slayer90,
Attached fileconfig.plist.zip(3.04 KB)

will start but the video will not start, then read the manual on the manuals.



Rep: (1783)
* Slayer90,
Attached fileconfig.plist.zip(3.18 KB)



Rep: (1783)
* Slayer90,
Attached fileCLOVER origin.zip(3.11 MB)



Rep: (1783)
SevenXP @ 07/18/19, 10:40*
IntelGraphicsFixup.kext,
NvidiaGraphicsFixup.kext,
CoreDisplayFixup.kext,
Shiki.kext,
IntelGraphicsDVMTFixup.kext,
AzulPatcher4600.kext,

This is a long time - BAD!
SevenXP @ 07/18/19, 10:40*
FakePCIID_Intel_HD_Graphics.kext,
FakePCIID_Intel_HDMI_Audio.kext,

It is generally trash and should not be used.

The chances are that it will work as you have very little, you need to cut the discrete as a class from dsdt / ssdt, otherwise there will be panic, try to add green and add the -wegnoegpu key
All kext update fromhttps://github.com/acidanthera



Rep: (1783)
TP-Link TL-WR841N / ND- Discussion

Attached Image

The forum decided to post images under the spoiler Attached Image

A photo:
Attached ImageAttached Image
Description:
The TL-WR841N wireless router is a combined wired / wireless network device designed for use in small and home offices. Using 2T2R MIMO technology, the TL-WR841N allows you to create a network with ultra-high data transfer speeds, which makes it possible to view HD video online, use IP-telephony and play online without delays and disconnections. The device is made in a stylish case and is equipped with a WPS button for quick installation of WPA2 protection.
Specifications:
Offsite specifications

Hardware
Interface 4 10/100 Mbit / s LAN port
1 10/100 Mbps WAN port
Buttons Quick Protection Setting Button (QSS)
Reset button
External power supply 9V DC. current / 0,6A
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Antenna 5dbi * 2 fixed omnidirectional antennas
Dimensions (WxLxH) 192 x 130 x 33 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
11n signaling speed: up to 300 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20dBm (EIRP)
Sensitivity (reception) 270M: -68 dBm with 10% PER
130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
Wireless functions Enable / Disable broadcast, WDS bridge, WMM, Statistics
Wireless network protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Wireless network 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP / L2TP / BigPond
DHCP Server, Client, List of DHCP clients,
Address Reservation
QoS (traffic prioritization) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec (ESP Head)
Access control Parental control, local control, list of nodes, access schedule, rule management
Network security (firewall) DoS, SPI firewall
Filtering by IP Addresses / Filtering by MAC Addresses / Domain Filter
Binding IP and MAC addresses
Management Access Control
Office in place
Remote control
Other
CE, FCC, RoHS certification
Scope of Delivery Wireless Router TL-WR841N
External power supply
CD with materials
Quick Installation Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ ~ 40
Storage temperature: -40 в„ѓ ~ 70 в„ѓ
Humidity (operating mode): 10% ~ 90% non-condensing
Humidity (during storage): 5% ~ 90% non-condensing
Firmware
Useful links:

The curator of the topic isN.o.F.a.c.e.


Post has been editedstp101 - 18.07.19, 12:30
Reason for editing: Brief comparison of existing firmware



Rep: (1783)
Intelligence @ 07/18/19, 10:17*
And I need a MiniDP Full Size DP

You obviously banned in Google, wellhttps://f.ua/powerplan...playport-ca910472.html: D



Rep: (1783)
Crea @ 07/18/19, 10:41*
what currents by default should be? I have usb2.0 500mA, usb3.0 and usb3.1 900mA. It seems to be the norm

If we consider platforms on a 100 chipset and above then:
<key>kUSBSleepPortCurrentLimit</ key>
<integer>2100</ integer>
<key>kUSBSleepPowerSupply</ key>
<integer>5100</ integer>
<key>kUSBWakePortCurrentLimit</ key>
<integer>2100</ integer>
<key>kUSBWakePowerSupply</ key>
<integer>5100</ integer>

If lower, then there
<key>kUSBSleepPortCurrentLimit</ key>
<integer>2100</ integer>
<key>kUSBSleepPowerSupply</ key>
<integer>4700</ integer>
<key>kUSBWakePortCurrentLimit</ key>
<integer>2100</ integer>
<key>kUSBWakePowerSupply</ key>
<integer>4700</ integer>



Rep: (1783)
Intelligence @ 07/18/19, 09:17*
how to connect mini DisplayPort to a full-sized DisplayPort connector which is on all video cards now. Adapters not met.

Well, like dirt, for examplehttps://f.ua/powerplan...-0-15m-kd00as1238.html

Full version

Help     rules

Now: 07/31/19, 09:21