darkhan.gaba , Try to give him a day to load the body is warmed up, if just water that has yet to evaporate, hypothetically ...

traiser_99 , 9vcn18ww

Yes, when conn power, lightweight surfing int + spotifay - 45C. There is a very dreary bolt tightening CO. LBO thermal compound MX-4 or noktua. Most pull the figures - but this is not ideal since each has its own curvature of the radiator. It is necessary to cut down turbobust and run any stress test (OCCT convenient) monitoring the temperature of each core - pull each bolt and look to the temperature schedules for each core and max respectively become equal achieve temperature min minute and scatter the nuclei. Without the back cover you put on edge by the Rev. vidyuhi laptop and twist .. A month total temperature falls to 5 degrees a good month to urge it in toys.

41-43

traiser_99 Then climb on the hood, see what's up with cooling. There is no third

traiser_99 Is no load you 50 rides? Similarly, the system did not ship?

Throttlestop not accidentally use? I noticed that sometimes after sleeping is not switched to the profile of the network ... And laptop lives from sleep to sleep, only reboot if the update vindv trebuet- this is no problem.

https://youtu.be/sOH5ypC-5Yw
I found why can not kerf freesync

https://youtu.be/zebMjmyRNq4
Tried kerf freesync on the built monitore- but we settings nvidia did not see this option enabled freesync / g-sync ..
No one tried? Sam freesync unit normally added to the cru utility.

alekskuraleks Another 8 gig operatives buy more clearly

scc_yura I have 8300 and 1060, but the matrix 300 60. Intel, there are no problems.

AstraVE , In fact, the infrared radiation can really "shine", which is why the military uses infrared cameras in surveillance, guidance, etc. heads. What gives them the all-weather, etc. (fog, mist)

Here recently updated nvidia firewood, declared support freesync .. Who nib tried hem like a monitor?

Posted on 26/08/2019, 12:33:

https://3dnews.ru/981377
And as I understood only through the display port.

timoha7 , disassemble sfotkay fasteners, trace. Interesting to see what went wrong

timoha7 , Look, the numbering of the screws is not necessary; there may be a skew of the site, it is necessary to try to pull it up on a live test with the temperature monitoring turned on. I do not think that the problem is in the sensors. And yet, after replacing the paste, you need to wait a couple of weeks until this paste spreads, -5 / 8 В° В° will leave. When you remove, look at the trace on the paste. For example, I have those screws that are closer to the battery, it was necessary to tighten stronger than the upper ones. In addition, I noticed that in laptops it is necessary to smear the paste fatter than on stationary patients.

timoha7 , Temperature jumps from bad spots radiator contact and cpu \ gpu. Chances are unevenly stretched radiator bolts.

I decided to go with the chrome on maykorosoft etzh. As something more like interyeys and nimble running, less battery ship. Here are just faced with a problem- video at 60 fps in YouTube poddergivaet periodically as you know in the old film camera jammed .. resets Edge, remove the extension, one FIG. Where to dig, I do not know.

Microcode Revision 0xB4

I haven’t tested it for a long time, but after numerous updates to windows, bios, etc. the result is better than the first time.
, ,
The main thing that is not worse} -)

Mitrofan /, I updated, normal flight.