Rep: (24)
* running2000
Thank you of course, but I do not have I-this router is not lost! Both range plow clearly, as a watch! Firmware 20170306 rel.39799 (5255). The only caveat - that the router itself is heated significantly, in my opinion this is not normal. Before that was 4 years ZyXeL NBG334W EE, so he is not warmed. I think still put on a cent. suitable copper radiator considering future load. And with highlights and nuances firmware LEDE OpenWRT and generally is clear. I will put Linux on a computer. (In addition to Windows and Hackintosh) the benefit of the SSD "extra lying around", and must start to collect himself firmware for themselves. Of course still have to study for a good material and instructions ..



Rep: (24)
running2000 @ 12/22/17, 12:27*
You'd be surprised what your awesome router is)))

I and so is worth a fresh Russian firmware 2017, is almost everything! Router bought two weeks ago, it was a pity not to v.2, bought v.4 (RU). What is there in the "Beta" can be a new and supernatural? A router actually quite navorochen, I already appreciated. But the fact that I need on the router surveillance, AdBlock - filter through advertising hosts file, torrents, etc .. The standard firmware from Tp-Link that can not be so surprised, "Beta" is unlikely to have! Therefore it is necessary to put the firmware OpenWRT or Lede. The problem is that in v.4 (RU) is a bit different processor, and there is no ready firmware, unlike v.2. And the experience of creating your firmware "for themselves" until enough. Above Nun70 threw the link to the firmware for LEDE v.4, but without Luci WEB-interface, command line only which is also still necessary to understand. And in the future WEB-interface is needed to make quick changes. In general, all quietly studying, you see, and can ready firmware gash craftsmen ..

Post has been editedswxswl - 23.12.17, 00:34



Rep: (24)
* running2000
I would like to know what instructions to put, since I found onhttps://lede-project.orgtwo different. The first one says: "Make sure that the LEDE firmware file you are going to install matches your router model and is called" ... .factory.bin ", since you will use it to change the vendor's firmware firmware towards LEDE." Your file is called "c7v4_ru20171031beta.bin". Second: "Flash instruction using restore TFTP:1. PC set to a fixed IP-address 192.168.0.66 2. Download lede ar71xx versatile archer c7 v4 squashfs factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start the tftp server tp_recovery.bin file in its root directory 4. Turn off the router 5. Press the reset button and keep 6. Turn on the router and hold the reset button and wait ~ 15 seconds 7. Release the reset button and after a short time, the firmware must be transferred to the tftp server 8. wait about 30 seconds to complete recovery " . and inThose. dataArcher C7 v4 is specified - Processor: Qualcomm Atheros QCA9561, apparently the English version of the router. And I have QCA9563 (I opened and looked). In general, it is not clear yet ..



Rep: (24)
* NuN70,
And what aboutprohibitionTP-Link installation of third-party firmware on routers? According to TP-Link technical support, there is no way to remove the restriction. Currently studying info and the ability to put LEDE on Archer C7 (RU) _V4. I would not want to make the device ..



Rep: (24)
So the fact of the matter is that in the table of supported equipment LEDE there are only versions v.1 and v.2, and v.4 is not supported, at least for today. Especially v.4 (RU).



Rep: (24)
I recently purchased this Archer C7 (RU) _V4 device, including with the goal of installing OpenWrt, but as it turned out, OpenWrt is well placed on v.1 and v.2. With the fourth version, and even Russian - some kind of neponyatki. Someone owns the information how to put OpenWrt on Archer C7 (EN) _V4?

Full version

Help     rules

Time is now: 18/09/19, 19:20