Himera92 In this version, yes.

Himera92 , the lower TC you have a post-out of the proz made through an adapter (white sticks out from under the radiator)

Himera92 , will not be. These chips are of the old design, about the same year as the MATRIX blue, which you had in the photo. They work well on Trinity boards (2010-2011) and on old thick consoles (2005-2009). It can and can be flashed and improved, but it is unlikely that you will do this and you need a programmer, and this is an additional 500r ... you do not need it.

You unsolder yours (You can not unwind the wires from the board, but the main thing is to check the power !!!! You need 5V, I don’t know what yours is, maybe 3V). You go to the sitehttp://x360ace.com/You take the wiring circuit there and solder the necessary wires to the right places. You do not need to flash anything. if you buy the latest version = airplane!

Yes, it will. But I would choose Ace any version, preferably 4-5

Posted 02/19/2019 05:47:

tonywhite , [S Himera92 ,
For X360 chip For X360 ACE V5 chip Modified 150 MHz chip ACE Chip Suitable for XBOX360 series chip 150 MHz Chip 150 MHz
https://pandao.ru/prod…42d1-8b93-f6b02f55b6d8

So this is X360run v1.1 - to be honest, I didn't deal with them. I put everything but them, I didn’t like them, and usually they got caught in Fatki 2005-2010. I would change ... the cost of the chip Ace fresh rubles 250 .... the price of the issue niocho. How do I tell ... the main thing is to hold the soldering iron in your hands at least once in your life.

P.S. maybe these chips are being made, but I don’t remember that ...

Ali. Take a look ... I will say .. but will have to disassemble the case. Or if you can, remove the left sidewall (removed simply) and take a flashlight inside - I will say.

Post has been editedtonywhite - 15.02.19, 15:18

Himera92 , answered above. Everything. See what the chip is. If the version matrix, cr3, cr3lite is upgrade to AceV3-4-5, you will be satisfied with the result. You can do this by simply pulling out the old chip and putting a new one on the same place on the same wire. The only thing that looks at the power, the old chips take 3v, and AceV3-4-5 take 5V.
If you have Ace then update the firmware from the stock to the modified one. This will require the SPI nand flasher. A link to the fast firmware chip can be found on the website hackfaq.

Himera92 , You need to either change the chip to a more productive / modern, if you installed it long ago. The second option is to update the firmware of the chip itself. With all these improvements will be loaded in 10 seconds.

As an option, I did not correctly put together something without a photo or video. The second option you have 2 different versions bp and console respectively. Revision

1. Record the boot with dashlaunch and install dashlanch and prescribe the path to FSD in the same place.
2. Hack up HDD to PC, see the file launch.ini. The path to FSD must be correctly spelled out.

3. Pros always make a shortcut to run FSD manually from the original Dasha, see if you can put Fribut not Krivorukov and he did it, search in games ..... mostly dashboards ....