Cagaz Ivan, Viber did not work on bad back in 2015.

Flashing the wave on the android and you will have a vibe with a vtsap and a telegram.

Post has been editedjack0571 - 07.04.19, 22:11

Cagaz Ivan, forget it, you won't come back to samsung apps anymore, look for bada programs on the Internet and install them according to this instruction. http://www.badapps.ru/…alo-esche-prosche.html

Post has been editedjack0571 - 07.04.19, 21:52

Download and unzip the archivehttps://yadi.sk/d/ub2zxB2EPNu3hA
Go to Download Mode (when the phone is off, hold down and hold 3 buttons: "Volume down, lock (button on the side), hang up" or volume up - camera - hang up. The screen will display in red letters "Download Mode". You saw this inscription, connect the phone, cable to the computer and flash the turbo10.2 firmware files that you downloaded earlier.
Open Multiloader with the right mouse button - “launch as administrator”, put the LSI dot, checkbox “Boot Change”, “Full Download”. We insert the files into the Multiloader - by simple dragging, into the program window.
Press the "Port Search" button - the inscription "Ready [Lismore]" should appear (the inscription "WAVE37" is possible).
Press the "Download" button - the firmware process will begin.

MadKoT, What happens when you press the power button?

The topic about the Android for wavelets was moved to another section.Samsung S8500 Wave - Android OS

CODENAME_684, For old firmware, it is enough to boot from the bada turco, and on some it is not necessary to flash it. The main thing is to properly call the core and throw it in the right place.

delovel5051, In theory, a new photo button should be activated with two buttons - call acceptance + hang up.

delovel5051, First, pull out the USB flash drive and drop the kernels through the card reader.

Start the recovery volume up buttons and end the call.
If it does not work, then ask Turco 10.2 (6-8 minutes in time, official -20 minutes), drop the files into the phone and on the USB flash drive, ask the photo and then follow the instructions.

Posted 12/12/2018 10:26 AM:


A person wants to install the SD version, there is a program on a flash drive and, if desired, you can switch to bad.

delovel5051,
try to rename the kernel to zimage
I usually make two kernel files (boot.img and zimage) for such old firmware and throw them on the USB flash drive and in the internal memory so as not to steam, what fota wants there.

delovel5051, There are such, on the bapapse.ru. - zendrokat 2.4 and KK 442 from wolf204
Separately, I have the type of touchscreen, the screenshots of which showed.

delovel5051, probably here Porting Android OS

delovel5051, look still here https: //forum.xda-deve…e-tools-4-x-x-t3618981

delovel5051, I found firmware 4.4.2 on my computer, there is "touchscreen" in the title

delovel5051, Android 444 screenshots under the spoiler in the cap http://www.badapps.ru/…-i-8530-v2-040714.html

delovel5051, Hey.
I do not know what tachwiz is, but all the firmware is onhttps: //forum.xda-deve…ung-tizen/bada-android
Here is another list of old firmwarehttps: //forum.xda-deve…wave-gt-s8500-t2842566

On firmware until autumn 2014, you can not turn off the phone.

delovel5051, if you suddenly can not see the contacts on the SIM card
you can - on the bad - menu - settings - contacts - export contacts - a memory card;
- switch to android - documents - Contact_xxxxxxxxxx.vcf

delovel5051, Yes, there will be two systems on the gunner and zendrokats, you can switch

delovel5051, I liked and used OmniRom SD version from Gunter33, Zendrokat 4.4.4 and zendrokat veyron 4.0.4 for a long time
The first two are interchangeable, just change the flash drive in the phone, although the card must be selected - 10 class, at least 4 GB
The last one is Internet distribution via wifi only on a non-password-protected channel.

Now I use QC from djkoloda, but this is the NAND version.
There is also a candy from djkoloda - there you can transfer part of the prog to a USB flash drive, it works slower than QC.
All firmware can be found on BADAP. Ru, and djkoloda is also on xda-developers

Post has been editedjack0571 - 30.11.18, 10:48

Why choose AOSP?
There are in fact OMNI 4.4.4 and 5.1.1 2017.

Post has been editedjack0571 - 30.11.18, 10:15

It looks like it depends on the sim card.
Now I checked on QC and candy from djkoloda, I see contacts on only one SIM card out of three.