Rep: (139)
* abc145 WinRT and retail could try to run.
There is a video on the network, as someone launched on the Lyumia 650. I recorded the image on the SD card. And it somehow started. Manipulations with the BDS-menu are also viewed.
Those. if the system is normally loaded from under the EFIESP partition, then by allowing the boot from the external drive, it will start searching for the bootloader on the memory card .. I don’t know the subtleties of all .. most likely, the bootarm.efi file from the WinRT image, when replacing the original, should start the interface installation.

But just too lazy to release your card. And nowhere - on the PC free space - a few hygiene.
Well, there is not enough time for everything. And experiences with WinRT suggest a long time to tinker.



Rep: (139)
Firmware idol5x, alas, did not start on my first retail-alcatel (
I stitched with the replacement of the broacher.
Moreover, on the first day of my attempts, it insistently did not want to be sewn at all. I have already reinstalled the drivers .. And it’s a mistake.
The next day everything went. At the first attempt, I swore at imei - then it was done without errors. But without starting.



Rep: (139)
I load in the Vorobejsawka cloud in the tools folder the most interesting archive: 3


Post has been editedvalvord - 18.06.19, 18:50



Rep: (139)
This guyhttps://pan.baidu.com/…161646#category/type=0
With helpof thisservice. Awesome search engine on pan.baidu - very clearly looking.
found interesting references
folderOrigin_android_N_IDOL4S_TMOcontains files:
U1D1B0B0BY00.mbn
B1D1B0B0BY00.mbn
N1D1B0B0BY00.mbn

Nothing to view / download the search service does not allow. :(
On the Internet, too, I do not see such a thing.
The folder name says it all ..

Posted on 06/15/2019 01:08:

Incidentally, from recent observations.
TCL 950 firmware - with letter designation v1D
Idol5x firmware - v4F
The one above (Origin_android_N_IDOL4S_TMO) is explicit tcl 950
Names of folders / files gave, username given .. Now let's search)
There is no other such IDOL4S TMO any more - only our 6071W


Post has been editedvalvord - 15.06.19, 01:25



Rep: (139)
I highly recommend to pay attention torepositorygithubgitlab
Herealmost 10 gigabytesmore than 15 gigabytes of android source from our device.
And not just an android. Modem, bootloader, a bunch of incomprehensible other sections .. - in general, there is everything (?) To collect it all from scratch.
Among all, there is some interesting software and documentation.
There is such a thingAttached fileTeleWeb е®ўж€· з«Ї ж“ЌдЅњ жЊ‡еЌ— .ppt(3.9 MB)

Maybe these sources could be useful for WoA ..: scratch_one-s_head:
If possible, it is necessary to communicate with those who know ..

Post has been editedvalvord - 11.06.19, 17:02



Rep: (139)
Until you left,
In the firmware there is a mention of simba6x - the githab repo is easily searched in Google. It looks like it is it. It's idol4x London, another clone of ours ..



Rep: (139)
* abc145
No, this is not a serial - this is the name of the firmware file ..
I did not understand where it is unpacked
It also sometimes pops up like that - just repeat the firmware ..



Rep: (139)
* abc145
for the first time it was the same for me - then it started up



Rep: (139)
* abc145
You rename your native programmer to one of the sugars folder. Presumably Idol4S_CN_NPRG7627.bin
And, probably, zabekapiv DPP, erase everything there - should start up, in theory.



Rep: (139)
* abc145 I have a cu-ref now clean



Rep: (139)
Right now I'm loading another interesting firmware into the Vorobejsawka cloud.
Remember the Legendarnui guy?
Alcatel IDOL 4S (Post Legendarnui91 # 81530569)
Alcatel IDOL 4S (Post Legendarnui91 # 81618115)
Perhaps what he said is true. Because there are a lot of coincidences in this story.

Yesterday, from the height of new knowledge and circumstances, I decided to look for the firmware again.
Well, now not windows. I was looking for an android postabilney, which would have got into my device. And there is no network everywhere and rebuses.
I know that in addition to TCL 950 and DTEK60 (bbry firmwares refuse to fit), there are a couple more clones of our device, the firmware of which I searched for for a long time without success.
These are models:
6076S
IDOL 5 PRO (not to be confused with idol 5s)
IDOL 4 PRO on Android 7.0 (from GFXBench results)
And some simba6.
And, presumably, 6070O

In search of me hooked directory with firmware to the device Idol5X. I meet such a model for the first time. Download-launched out of curiosity.
Priofigel. In the shugare, the model 950 was displayed, the one that fits into my device. I decided to sew.
The firmware initially seemed weird. Instead of a solid section in more than 4 Gb, it sewed many sections smaller.
пїЅ
There is a start.
Strange. device state immediately unlocked.
After a while, a start-up splash screen appeared with a start-up tune. - I have eyes on my forehead. This is not a typical run-in firmware from TCL 950.
This firmware is from IDOL5X itself. He is Simba6T. On a pure Android 7 with a bunch of service prog and a full set of Google applications. Even Russian is.
- Didn't Legendarnui write about such firmware?

The fact that the device state - unocked brings me to the idea that it could start on ordinary retail devices .. Not a fact .. By evening, I’ll check it on my first Alcatel.
And who is interested - you can try to swing from the cloud Vorobejsawka, in the folder china fileBlack_v4F1F_DisableSElinux.EXE
proofs / photos / screenshots /
пїЅ
Attached fileWP_20190610_09_54_38_ProTrim.mp4(2.45 MB)

Attached Image

Attached Image

Attached Image

Attached Image


Later, I’m still throwing in system screens.
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image




Post has been editedvalvord - 10.06.19, 11:58
Reason for editing: 6070O



Rep: (139)
* the_Python, Yes, even on different computers, qfil behaves differently ..
I tried to quietly flash the XBL partition on my work PC. QFIL starts, but hangs tight.
Apparently, something is missing him.
On a working PC did not really understand ..
In general, QFIL does not work correctly.

You can try to pack KovalDN firmware with the help of the Chinese Package Tool - it will pack the firmware into EXE, based on Sugar.

Post has been editedvalvord - 08.06.19, 11:32



Rep: (139)
* the_Python, unlikely to collect .ffu.
Although Gus somehow managed to make .ffu for WoA. We do not have such knowledge / skills.
the_Python @ 07.06.19, 07:43*
and separately for files from our guru, something does not want ...
In general, it is strange.
If sugar flashed openmarket, then QFIL should. The principle of their work is the same.

And now I'm driving an android from TCL950. On this prototyped copy it is stitched as freely as native firmware.
Pumped up several assemblies. Everything is not very stable. Everywhere there are reboots - somewhere more often, somewhere less often. Especially bad when connected charging. Charging too sucks - something with a battery charge controller. Mobile network is nowhere. Otherwise, it works.
A couple of days ago I found the most interesting firmware - with embedded Google services and a modem configuration service program.
The service program (MBN test) changes the single-sim / dual-sim modes and the modem region (they are dark there). Network can not start, no matter how driven. She sees Simka herself. I'm trying more in single-sim mode, because our idol is odnosim.
By the way, they also do not appear in any mode, no matter how flashing qcn.
But with the modem section (NON-HLOS) from ZUK Z2 (odnosymochnik on 820 dragon) - they are picked up, but the phone ceases to perceive the inserted SIM.

I tried the Blackberry firmware. It is under fastboot and assumes the presence of its markup. The TCL950 is sewn with errors on top, because there are simply no sections in the TCL 950, and some of them do not fit in size - it does not fit.
I found some other strange firmware. Both fastboot and firehose are involved in the scripts there. But there is a reconciliation with the device platform, and it does not sew.

Now I’m more futilely trying to launch a network. Without it, there is little meaning.



Rep: (139)
* the_Python,
emmcdl
It's all quite simple.
Connect the phone in edl mode (when turned on, hold down the on + volume down key).
In the device manager, we look at which com port our beast is sitting at.
For convenience, you can create a new folder. In it we put emmcdl, the flasher to idol4s and the firmware file in FFU.
In the command line, go to this folder.
cdThe path to the folder
Then we register the command for the firmware.
emmcdl -p comx (Wherex- port number) -f Idol4S_PRO_WIN_NPRG7627.bin -ffu F1050.14.08011.33400.FFU
It may be necessary to re-enter the phone several times by holding the above keys for a long time - the command does not always work right away.


I saw last month 640 lumii in the Euroset were distributed for a pittance .. And several more models.

Post has been editedvalvord - 03.06.19, 18:19



Rep: (139)
For the first time I could not resist - I asked for a prototype. Not anyhow, but one of our unspoiled firmware
How do you like that?)
Attached Image



Rep: (139)
* the_Python, contact them in the same repair. Do they give some of their own guarantee?
And what, actually, did they replace? Speaker? Or motherboard? There must be some act of work done.
If the motherboard - you can try to flash.
But it is better to shake with them.



Rep: (139)
* abc145 stumbled upon such instruction on the activation of 4G + (which is really 4G, and not like ours). Maybe if the unlocking of frequencies does not work, then at least something else may work.
On the TCL 950, LTE cat is generally announced everywhere. 12. Well, either block. Or modems are different.
If transferring those EFS files activates IMS with VoLTE, maybe new frequencies will see / new modes of operation? - if it is so capable of influencing opportunities - why not?



Rep: (139)
* abc145 well, or on 4S cat 4, while on the pro - cat 6.

I now spied it)
But nevertheless .. What if this restriction can be removed ?.

8996 supports up to cat. 12. Therefore lured



Rep: (139)
* abc145 and about the modem 6077x.
Does LTE-A catch on it? I was looking for your screenshots with this icon, but, apparently, you haven’t done it yet.
I remember there is some difference ..
In Pro, like, lte cat. 12
And in 4S - whether 9, or something else lower ..
- in general, the difference should be noticeable if in 4S LTE cat. 12 is really locked.
I think maybe dig in this direction.



Rep: (139)
* Oskar8429, Need firmware with BDS menu.
For example,this
Or XBL with BDS enabled menufrom here


Yesterday with* islat, successfully removed the symlock.
Fully erase the firmware is not necessary. - Only sections of modems. Accordingly, they need to otbekapit as it should.
And, of course, first of all, the original QCN.

The algorithm is as follows:
Firmware with BDS menu.
From the diagnostic mode, back up all possible ways QCN.
From under the BDS menu, we make backups of the modem sections.
There modems to erase.
Reflash any firmware.(it would be possible to flash separately pure modems (without registered serials and imeev), but there are no such yet)
From the diagnostic mode, first restore our original file - family IMEI and SN will be written. Then on top of it - XQCN from PRO with XDA.
- and the network should earn)

There will be questions - write. But in general,All the necessary information in the subject is.
Except, perhaps, backup sections.
This is done from under the regime MassStorage programeMMC RAW Tool

Post has been editedvalvord - 15.04.19, 13:18

Full version

Help     rules

Now: 07.22.19, 10:30